AGD8136A

AGD8136A AOSMD | Alldatasheet

Document overview

• Manufacturer or author: Martha.aparicio
• PDF pages: 14

Technical content

Features

• Maximum blocking voltage +600V
• Output current: +200mA / -350mA (Typ.)
• Matched propagation delay for all channels
• Shoot-through (cross-conduction) protection
• Under-voltage lockout protection (UVLO)
• Over-current protection (OCP)
• Fault output corresponding to UV (Vcc supply) and OCP
• Shut-down of all channels during fault conditions
• Adjustable fault output duration time
• 3.3V / 5V CMOS and TTL input logic compatible
• Input logic: Schmitt trigger receiver circuit (Active Low)

Applications

• 3-phase motor drives
• Home appliances
• IGBT and power MOS gate drivers for general purpose Internal Block Diagram VSS/COM LEVEL SHIFTER HV LEVEL SHIFTER RESET SET DRIVERDEADTIME＆ SHOOT-THROUGH PREVENTION INPUT NOISE FILTER INPUT NOISE FILTER POR FAULT RESTART VSS/COM LEVEL SHIFTER DELAY INPUT NOISE FILTER LATCH UV DETECT FILTER VSS ITRIP RCIN EN /FO VB(x3) HO(x3) VS(x3) NOISE FILTER UV DETECT FILTER SINGLE PULSE R QS DRIVER VCC LO(x3) COM /HIN(x3) /LIN(x3)

Rev.1.3 October 2018 www.aosmd.com Page 2 of 14 AGD8136A / AGD8236A

Ordering Information

Part Number Temperature Range Package AGD8136A -40°C to 125°C SOP-28L AGD8236A -40°C to 125°C SOP-28L Typical Application Circuit To Load Rshunt DC AGD8136A / AGD8236A VCC /HINU /FO ITRIP EN RCIN COM LOW VBU HOU VSU VBV HOV VSV VBW HOW VSW LOU LOV VSS /HINV /HINW /LINU /LINV /LINW NC NC NC 15V

Rev.1.3 October 2018 www.aosmd.com Page 3 of 14 AGD8136A / AGD8236A Pin Configuration Pin Description Pin Number Pin Name Pin Function

1 VCC Low-Side Supply Voltage

2 /HINU High-Side Logic Input (U-Phase) 3 /HINV High-Side Logic Input (V-Phase) 4 /HINW High-Side Logic Input (W-Phase) 5 /LINU Low-Side Logic Input (U-Phase) 6 /LINV Low-Side Logic Input (V-Phase) 7 /LINW Low-Side Logic Input (W-Phase) 8 /FO Fault Output with Open Drain (Indicates Over-Current and VCC UVLO)

9 ITRIP Analog Input for Over-Current Shutdown

10 EN Enable I/O Functionality (Positive Logic)

11 RCIN External RC-Network Input used to define Fault Output Duration Time

12 VSS Logic Ground

13 COM Power Ground

14 LOW Low-Side Driver Output (W-Phase)

15 LOV Low-Side Driver Output (V-Phase)

16 LOU Low-Side Driver Output (U-Phase)

(Top View) VCC /HINU /FO ITRIP EN RCIN COM LOW VBU HOU VSU VBV HOV VSV VBW HOW VSW LOU LOV VSS /HINV /HINW /LINU /LINV /LINW NC NC NC

Rev.1.3 October 2018 www.aosmd.com Page 4 of 14 AGD8136A / AGD8236A Pin Description (continued) Pin Number Pin Name Pin Function

17 NC No Connection

18 VSW High-Side Floating Supply Offset Voltage (W-Phase)

19 HOW High-Side Driver Output (W-Phase)

20 VBW High-Side Floating Supply Voltage (W-Phase)

21 NC No Connection

22 VSV High-Side Floating Supply Offset Voltage (V-Phase)

23 HOV High-Side Driver Output (V-Phase)

24 VBV High-Side Floating Supply Voltage (V-Phase)

25 NC No Connection

26 VSU High-Side Floating Supply Offset Voltage (U-Phase)

27 HOU High-Side Driver Output (U-Phase)

28 VBU High-Side Floating Supply Voltage (U-Phase)

Rev.1.3 October 2018 www.aosmd.com Page 5 of 14 AGD8136A / AGD8236A Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute values referenced to VSS unless otherwise stated in the table. Symbol Parameter Min. Max. Units VCC Low-Side Supply Voltage -0.3 20 (1) V VIN Logic Input Voltage (/LIN, /HIN) VSS-0.3 VSS+5.2 VITRIP ITRIP Input Voltage VSS-0.3 VSS+5.2 VEN Enable Input Voltage VSS-0.3 VSS+5.2 VRCIN RCIN Input Voltage VSS-0.3 VCC+0.3 VB High-Side Floating Supply Voltage -0.3 620 VS High-Side Floating Supply Offset Voltage VB-20 (1) VB+0.3 VHO High-Side Driver Output Voltage VS-0.3 VB+0.3 VLO Low-Side Driver Output Voltage COM-0.3 VCC+0.3 VFO Fault Output Voltage VSS-0.3 VCC+0.3 COM Power Ground VCC-25 VCC+0.3 dVS/dt Vs Offset Voltage Slew Rate (2) - 50 V/ns PWHIN High-Side Input Pulse Width 500 - ns Rth(j-a) Thermal Resistance, Junction to Ambient - 78 °C/W TJ Junction Temperature - 150 °C TS Storage Temperature -55 150 TL Lead Temperature (Soldering, 10 seconds) - 300 ESD Human Body Model 2 kV Note: 1. An internal 20V zener diode is integrated to clamp each supply voltage. 2. Not subject of production test, verified by characterization.

Rev.1.3 October 2018 www.aosmd.com Page 6 of 14 AGD8136A / AGD8236A Recommended Operation Conditions The device is not guaranteed to operate beyond the Recommended Operating Conditions. All voltage parameters are absolute voltages referenced to VSS unless otherwise specified. The offset rating is tested with supplies of (VCC - COM) = (VB - VS) = 15 V. Symbol Parameter Min. Max. Units VCC Low-Side Supply Voltage AGD8136A 10 20 V AGD8236A 13.2 20 VIN Logic Input Voltage (/LIN, /HIN) VSS VSS+5 VEN Enable Input Voltage VSS VSS+5 VB High-Side Floating Supply Voltage AGD8136A VS+10 VS+20 AGD8236A VS+13.2 VS+20 VS High-Side Floating Supply Offset Voltage (3) COM-6 600 VS(t) Transient High-Side Floating Supply Voltage (4) -50 600 VHO High-Side Driver Output Voltage VS VB VLO Low-Side Driver Output Voltage COM VCC COM Power Ground -5 5 VFO Fault Output Voltage VSS VCC VRCIN RCIN Input Voltage VSS VCC VITRIP ITRIP Input Voltage VSS VSS+5 TA Ambient Temperature -40 125 °C Note: 3. Logic operation for VS of -6V to 600V. Logic state held for VS of -6V to -VBS. 4. Operational for transient negative VS of VSS-50V with a 50ns pulse width, which is guaranteed by design. Static Electrical Characteristics VCC = VBS = 15V. TA = 25°C unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Units UVCC+ VCC Under-Voltage Positive Going Threshold AGD8136A 8.0 8.9 9.8 V AGD8236A 10.8 11.9 13.0 UVCC- VCC Under-Voltage Negative Going Threshold AGD8136A 7.4 8.2 9.0 AGD8236A 10.3 11.4 12.5 UVCChys VCC Under-Voltage Hysteresis AGD8136A - 0.7 - AGD8236A - 0.5 - UVBS+ VBS Under-Voltage Positive Going Threshold AGD8136A 8.0 8.9 9.8 AGD8236A 10.0 11.0 12.0 UVBS- VBS Under-Voltage Negative Going Threshold AGD8136A 7.4 8.2 9.0 AGD8236A 9.0 10.0 11.0 UVBShys VBS Under-Voltage Hysteresis AGD8136A - 0.7 - AGD8236A - 1.0 - ILK High-Side Floating Supply Leakage Current (per 1-Phase) VB=VS=600V - - 50 μA

Rev.1.3 October 2018 www.aosmd.com Page 7 of 14 AGD8136A / AGD8236A Symbol Parameter Conditions Min. Typ. Max. Units IQBS Quiescent VBS Supply Current (per 1-Phase) VIN=5V (all inputs are in the off state) - 70 120 IQCC Quiescent VCC Supply Current (per 1-Phase) - 1 2 mA VOH High Level Output Voltage Drop, VBIAS - VO IO=20mA, VIN=0V - 0.9 1.4 V VOL Low Level Output Voltage Drop, VO IO=20mA, VIN=5V - 0.4 0.6 IO+ Output High Current with Capacitive Load CL=10nF 120 200 - mA IOpk+ Peak Output High Short Circuit Pulsed Current VO=0V, PW≤10μs (Single Pulse) - 220 - IO- Output Low Current with Capacitive Load CL=10nF 220 350 - IOpk- Peak Output Low Short Circuit Pulsed Current VO=15V, PW≤10μs (Single Pulse) - 375 - VIH High Level Input Voltage 2.5 - - V VIL Low Level Input Voltage - - 0.8 VCLAMP Input Clamp Voltage (/LIN, /HIN, ITRIP, EN) IIN=100μA 5.2 5.6 5.9 IHIN+ Input Bias Current VHIN=5V - 110 150 μA IHIN- Input Bias Current VHIN=0V - 150 200 ILIN+ Input Bias Current VLIN=5V - 110 150 ILIN- Input Bias Current VLIN=0V - 150 200 VRCIN,TH RCIN Positive Going Threshold - 8 - V IRCIN RCIN Input Bias Current VRCIN=0V or 15V - - 1 μA RRCIN,ON RCIN Low On-Resistance I=1.5mA - 50 100 Ω VIT,TH+ ITRIP Positive Going Threshold 0.42 0.46 0.5 V VIT,TH- ITRIP Negative Going Threshold - 0.4 - VIT,Hys ITRIP Hysteresis - 0.06 - IITRIP+ High ITRIP Input Bias Current VITRIP=4V - 5 40 μA IITRIP- Low ITRIP Input Bias Current VITRIP=0V - - 1 VEN,TH+ EN Positive Going Threshold - - 2.5 V VEN,TH- EN Negative Going Threshold 0.8 - - IEN+ High EN Input Bias Current VEN=5V - 5 40 μA IEN- Low EN Input Bias Current VEN=0V - - 1 RFO,ON Fault Low On-Resistance I=1.5mA - 50 100 Ω

Rev.1.3 October 2018 www.aosmd.com Page 8 of 14 AGD8136A / AGD8236A Dynamic Electrical Characteristics VBIAS (VCC or VBS) = 15V, CL = 1000pF and TA = 25°C unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Units tON Turn-On Propagation Delay VIN=0V or 5V 400 530 750 ns tOFF Turn-Off Propagation Delay 400 530 750 tR Turn-On Rise Time - 125 190 tF Turn-Off Fall Time - 50 75 tIN,FLT Input Filter Time (/LIN, /HIN) (5) 200 350 510 tEN EN Low to Output Shutdown Propagation Delay VIN=0V VEN=5V  0V 250 460 650 tEN,FLT EN Input Filter Time 100 200 - tFOd Fault Output Duration Time (RCIN: C = 1nF, R = 2MΩ) VITRIP=1V 1.3 1.65 - ms tITRIP ITRIP to Output Shutdown Propagation Delay Low Side VITRIP=5V, VIN=0V, VFO=5V (10kΩ pull-up) 420 620 970 ns High Side 600 800 1150 tIT,FLT ITRIP Filter Time - 400 - tFO ITRIP to FO Propagation Delay 400 600 950 DT Dead Time (6) VIN=0V or 5V without External Dead Time 100 275 420 MT Matching Delay Time (tON, tOFF) (7) |tON(HO) - tON(LO)| or |tOFF(HO) - tOFF(LO)| - - 100 PM Output Pulse Width Matching (8) Input Pulse Width=10μs - - 150 Note: 5. The minimum width of the input pulse is recommended to exceed 500ns to ensure the filtering time of the input filter. 6. Please refer to ‘Dead Time’ definition of ‘Function Diagram’. 7. This parameter, MT and MDT applies to all of the channels. 8. PM is defined as |(input pulse width) – (output pulse width)|.

Rev.1.3 October 2018 www.aosmd.com Page 9 of 14 AGD8136A / AGD8236A Output Activation /HIN or /LIN HO or LO Note: Output signal (HO or LO) is triggered by the edge of input signal. Input / Output Timing Diagram 90% 10% 50% tRtON 10% 50% tFtOFF 90% HO or LO /HIN or /LIN PWIN PWOUT Dead Time Activation EN /HIN /LIN HO LO L L or H L or H L L H H L L H L H H L /HIN /LIN HO LO DT 50% 50% 50% 50% </HIN on and /LIN off> /HIN /LIN HO LO DT 50% 50% 50% 50% </HIN off and /LIN on> /HIN /LIN 50% 50% MT LO HO LO HO MT 10% 90% <Delay Matching Waveform Definition>

Rev.1.3 October 2018 www.aosmd.com Page 10 of 14 AGD8136A / AGD8236A Function Timing Diagram A. Illustration of Shoot-Through (Cross-Conduction) Protection Logic HO LO /HIN /LIN a a a b ca b Note: a. When one output (high or low side) is turned on, the other side turn-on input is ignored. b. If both outputs are changed simultaneously, the turn-on activation is done by the internal dead time of 275ns typ. (For more information, please refer to below ‘Dead Time’ section.) c. When high-side (/HIN) and low-side (/LIN) have turn-on inputs at the same time, low-side (/LIN) has the priority. B. VCC (VBS) Supply Under-Voltage (UV) Lockout Timing Diagram a. LO operation by VCC under-voltage protection UVCC+ UVCC- /LIN VCC LO /FO tFOd tUVCC,LO VRCIN,THRCIN VRCIN,TH tUVCC,FO UVCChys

Rev.1.3 October 2018 www.aosmd.com Page 11 of 14 AGD8136A / AGD8236A b. HO operation by VCC under-voltage protection /HIN HO VBS LO keep low-level UVCC+ UVCC-VCC /FO tFOd tUVCC,HO VRCIN,THRCIN VRCIN,TH tUVCC,FO c. VBS supply under-voltage (UV) lockout timing diagram UVBS+ UVBS- /HIN VBS HO /FO UVBShys keep high-level (no fault output) tUVBS,HO

Rev.1.3 October 2018 www.aosmd.com Page 12 of 14 AGD8136A / AGD8236A C. Over-Current Protection a. When ITRIP voltage rises higher than positive going threshold for t < tFOd VIT,TH+ /HIN or /LIN VITRIP HO or LO /FO tFOd VRCIN tIT,FLT tFO VRCIN,TH tITRIP Less than tIT,FLT b. When ITRIP voltage keeps longer than tFOd VIT,TH+ tFOd VIT,TH- VRCIN,TH /HIN or /LIN VITRIP HO or LO /FO VRCIN tIT,FO

Rev.1.3 October 2018 www.aosmd.com Page 13 of 14 AGD8136A / AGD8236A Package Dimensions, SOP-28L

Rev.1.3 October 2018 www.aosmd.com Page 14 of 14 AGD8136A / AGD8236A LEGAL DISCLAIMER Applications or uses as critical components in life support devices or systems are not authorized. AOS does not assume any liability arising out of such applications or uses of its products. AOS reserves the right to make changes to product specifications without notice. It is the responsibility of the customer to evaluate suitability of the product for their intended application. Customer shall comply with applicable legal requirements, including all applicable export control rules, regulations and limitations. AOS' products are provided subject to AOS' terms and conditions of sale which are set forth at: http://www.aosmd.com/terms_and_conditions_of_sale LIFE SUPPORT POLICY ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR U SE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.