PEF32002VTV1.1 INTEL | Alldatasheet
Document overview
- Manufacturer or author: aleyendecker
- PDF pages: 2
Technical content
Features
- Worldwide programmability for AC transmission performance parameters according to ITU-T Q.552 and Telcordia GR-57-CORE
- On-hook transmission
- CID type 1, 2, 3 transmission support
- DTMF generator & receiver
- Integrated DC/DC PWM controller
- Balanced (up to 85 Vrms) & unbalanced (up to 50 Vrms) ringing
- DC, AC and fast ring trip detection
- Loop start signaling
- Ground start signaling
- Ground key indication
- Pulse metering (TTX)
- PCM interface G.711 A-law/μ-law or 16 bit linear
- Serial Control Interface SCI (Lantiq), big and little endian support, SPI compatible
- Linux® TAPI support
- Polling or interrupt driven access
- Wideband audio support (16 kHz, 16 bit linear)
- Integrated Test and Diagnostic Functions The DUSLIC™ XS1 and DUSLIC™ XS2 line interface solution combine a analog codec and high voltage SLICs in a single package with reduced footprint. This unmatched fl exibility and performance enables CPE Voice applications with optimized design and cost. The DUSLIC™ XS is the latest addition to Lantiq´s mature and fi eld-proven Voice CPE product line. PIN-to-PIN compatible 1 and 2 channel solutions enable customer to design a single hardware on basis of a 2-layer board. Compared to other available devices, DUSLIC™XS offers full CO grade transmission performance (concerning ringing, feeding, DTMF generation & detection, and Caller-ID) with an industrial temperature range. DUSLIC™XS also supports industry standard (GR-909) line testing and requirements and additional unique tests such as Capacitance Measurement, Phone Detection, AC Level Metering, Make-and-Break Dial Tone and Universal Tone Detection. A Best-in Class Bill of Material and the ability to implement designs on a 2-layer PCB allows CPE system manufacturers to offer voice telephony with CO grade performance and full wideband (16 kHz/16 bit) support at optimized system cost. Industry leading lowest power consumption, measured in both on and off- hook conditions, allows system manufacturers to meet stringent Code of Conduct requirements while using a smaller power supply to further improve system design and cost. Product Highlights
- PIN-to-PIN compatible 1 and 2 channel solution
- Meets worldwide POTS specification
- CO-grade transmission performance - 150 V ringing voltage - Feeding up to 50 mA - Automatic ring current regulation - DTMF generation & detection - Caller ID generation
- Industrial temperature range (-40°C…+85°C)
- Low PIN-count SoC-interface (CSI)
- Wideband support (16 kHz, 16 bit linear)
- Best-in-class RBOM - Combined DC/DC - Shared protection - Ring current regulation
- Dedicated schematics and LOM for various applications
- 2-layer reference design
- Extremely low power consumption (due to high accuracy DC feeding and ring current regulation)
- Advanced integrated line testing (exceeding GR-909)
- High-level API software package (TAPI)
- Coeffi cient calculation tool (XSCOS)
- Grafi cal User Interface (GUI)
- Complete design-in and system package Product Brief
How to reach us: http://www.Lantiq.com Published by Lantiq
85579 Neubiberg, Germany
© 2014 Lantiq. All Rights Reserved. Product Brief Block Diagram DUSLIC™-XS Lantiq‘s Next Generation Voice CPE Solution Product Summary Sales Code Description Package PEF 32002 VT V1.1 DUSLIC XS2 - 2 channel CODEC/SLIC PG-VQFN-68 PEF 32001 VT V1.1 DUSLIC XS1 - 1 channel CODEC/SLIC (PIN-to-PIN compatible version) PG-VQFN-68 PEF 32001 V V1.1 DUSLIC-XS1 - 1 channel CODEC/SLIC PG-VQFN-48 Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regar- ding the application of the device, Lantiq hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Lantiq Offi ce (www.Lantiq.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Lantiq Offi ce. Lantiq components may be used in life-support devices or systems only with the express written approval of Lantiq, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Order Number: PB-e-0061-v1 Analog Line Module Controller Interrupt Serial Interface GPIOs PCM ROM/RAM SLIC SLIC Analog Channel A Analog Channel B PLL, Clock Control Host Interface BUS BUS DC/DC Converter Phone Line Not available in 1 channel device HOST Broadband Network (PON, DSL or Cable) WLAN PON, DSL or Cable SoC SDRAM FLASH POTS POTS USB Lantiq Chips Third-party Chips SPI (μC) PCM DUSLIC™ XS PEF 32002 VT V1.1 PEF 32001 V/VT V1.1 Linux® is registered trademark of Linus Torvalds VxWorks® is the registered trademark of Wind River, Inc. Application Diagram