PE600SA NIKOSEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
REV1.0 E-43-1 N-Channel Enhancement Mode Field Effect Transistor PE600SA PDFN 3x3P Halogen-Free & Lead-Free NIKO-SEM PRODUCT SUMMARY V(BR)DSS RDS(ON) ID 30V 12mΩ 30A GSSS#1 D D D D ABSOLUTE MAXIMUM RATINGS (TA = 25 °C Unless Otherwise Noted) PARAMETERS/TEST CONDITIONS SYMBOL LIMITS UNITS Drain-Source Voltage VDS 30 V Gate-Source Voltage VGS ±20 V Continuous Drain Current3 TC = 25 °C ID A TC = 100 °C 19 TA = 25 °C 11 TA = 70 °C 9.3 Pulsed Drain Current1 IDM 80 Avalanche Current IAS 21 Avalanche Energy L = 0.1mH EAS 22 mJ Power Dissipation4 TC = 25 °C PD W TC = 100 °C 8.3 TA = 25 °C 3.1 TA = 70 °C 2 Operating Junction & Storage Temperature Range Tj, Tstg -55 to 150 °C THERMAL RESISTANCE RATINGS THERMAL RESISTANCE SYMBOL TYPICAL MAXIMUM UNITS Junction-to-Ambient2 t≦10s RJA 40 °C / W Steady-State RJA 69 Junction-to-Case Steady-State RJC 6 1Pulse width limited by maximum junction temperature. 2The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. 3Package limitation current is 16A 4The Power dissipation is based on RJA t ≦10s value. G : GATE D : DRAIN S : SOURCE
REV1.0 E-43-1 N-Channel Enhancement Mode Field Effect Transistor PE600SA PDFN 3x3P Halogen-Free & Lead-Free NIKO-SEM ELECTRICAL CHARACTERISTICS (TJ = 25 °C, Unless Otherwise Noted) PARAMETER SYMBOL TEST CONDITIONS LIMITS UNIT MIN TYP MAX STATIC Drain-Source Breakdown Voltage V(BR)DSS VGS = 0V, ID = 1mA 30 V Gate Threshold Voltage VGS(th) VDS = VGS, ID = 250A 1.3 1.75 2.3 Gate-Body Leakage IGSS VDS = 0V, VGS = ±20V ±100 nA Zero Gate Voltage Drain Current IDSS VDS = 24V, VGS = 0V 0.1 mA VDS = 20V, VGS = 0V, TJ = 55 °C 10 Drain-Source On-State Resistance1 RDS(ON) VGS = 4.5V, ID = 7.6A 9.9 15 mΩ VGS = 10V, ID = 7.6A 7.8 12 Forward Transconductance1 gfs VDS = 10V, ID = 7.6A 52 S DYNAMIC Input Capacitance Ciss VGS = 0V, VDS = 15V, f = 1MHz 1030 pF Output Capacitance Coss 177 Reverse Transfer Capacitance Crss 123 Gate Resistance Rg VGS = 0V, VDS = 0V, f = 1MHz 1.9 Ω Total Gate Charge2 Qg(VGS=10V) VDS = 15V , ID = 7.6A nC Qg(VGS=4.5V) 12 Gate-Source Charge2 Qgs 3 Gate-Drain Charge2 Qgd 5.7 Turn-On Delay Time2 td(on) VDD = 15V ID 7.6A, VGEN = 10V, RG =6Ω nS Rise Time2 tr 12 Turn-Off Delay Time2 td(off) 36 Fall Time2 tf 15 SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS (TJ = 25 °C) Continuous Current3 IS 16 A Forward Voltage1 VSD IF = 1A, VGS = 0V 0.6 V Reverse Recovery Time trr IF = 7.6A , dlF/dt = 100A / S 14 nS Reverse Recovery Charge Qrr 3.8 nC 1Pulse test : Pulse Width 300 sec, Duty Cycle 2％. 2Independent of operating temperature. 3Package limitation current is 16A
REV1.0 E-43-1 N-Channel Enhancement Mode Field Effect Transistor PE600SA PDFN 3x3P Halogen-Free & Lead-Free NIKO-SEM 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 -50 -25 0 25 50 75 100 125 150 VGS=10V ID=7.6A 0.004 0.008 0.012 0.016 0.02 0 6 12 18 24 30 VGS=10V VGS=4.5V 0.01 0.02 0.03 0.04 0.05 2 4 6 8 10 ID=7.6A CISS COSS CRSS 200 400 600 800 1000 1200 1400 0 5 10 15 20 25 30 25℃ 125℃ -20℃ 0 1 2 3 4 5 0 1 2 3 4 5 VGS=10V VGS=9V VGS=8V VGS=7V VGS=6V VGS=5V VGS=4.5V VGS=2.8V VGS=3V Output Characteristics ID, Drain-To-Source Current(A) Transfer Characteristics ID, Drain-To-Source Current(A) VGS, Gate-To-Source Voltage(V) VDS, Drain-To-Source Voltage(V) Normalized Drain to Source ON-Resistance TJ , Junction Temperature(˚C) Capacitance Characteristic C , Capacitance(pF) VDS, Drain-To-Source Voltage(V) On-Resistance VS Temperature On-Resistance VS Gate-To-Source Voltage RDS(ON)ON-Resistance(OHM) VGS, Gate-To-Source Voltage(V) On-Resistance VS Drain Current RDS(ON)ON-Resistance(OHM) ID , Drain-To-Source Current(A)
REV1.0 E-43-1 N-Channel Enhancement Mode Field Effect Transistor PE600SA PDFN 3x3P Halogen-Free & Lead-Free NIKO-SEM single pulse Duty cycle=0.5 0.2 0.1 0.05 0.02 0.01 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 Notes 1.Duty cycle, D= t1 / t2 2.RthJA = 69 ℃/W 3.TJ-TA = P*RthJA(t) 4.RthJA(t) = r(t)*RthJA DC 100ms 10ms 1ms 0.01 0.1 100 1000 0.1 1 10 100 NOTE : 1.VGS= 10V 2.TA=25˚C 3.RθJA = 69˚C/W 4.Single Pulse Operation in This Area is Limited by RDS(ON) 0.001 0.01 0.1 1 10 100 Single Pulse RθJA = 69˚C/W TA=25˚C 25℃ 150℃ 0.1 100 0 5 10 15 20 25 VDS=15V ID=7.6A Gate charge Characteristics Characteristics Qg , Total Gate Charge(nC) VGS , Gate-To-Source Voltage(V) Source-Drain Diode Forward Voltage VSD, Source-To-Drain Voltage(V) IS , Source Current(A) Safe Operating Area Single Pulse Maximum Power Dissipation ID , Drain Current(A) Power(W) Single Pulse Time(s) VDS, Drain-To-Source Voltage(V) Transient Thermal Response Curve r(t) , Normalized Effective Transient Thermal Resistance T1 , Square Wave Pulse Duration[sec]