PA5S6EA NIKOSEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Pb−Free, Halogen Free and RoHS compliant.
  • Low RDS(on) to Minimize Conduction Losses.
  • Ohmic Region Good RDS(on) Ratio.
  • Optimized Gate Charge to Minimize Switching Losses.
  • Products Integrated ESD diode with ESD Protected up to 2KV.

Applications

  • Protection Circuits Applications.
  • Logic/Load Switch Circuits Applications.
  • Space Limit & Smart Devices Applications. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C Unless Otherwise Noted) PARAMETERS/TEST CONDITIONS SYMBOL LIMITS UNITS Gate-Source Voltage VGS ±12 V Continuous Drain Current2 TA = 25 °C ID 0.75 A TA = 70 °C 0.6 Pulsed Drain Current1 IDM 1.6 A Power Dissipation TA = 25 °C PD 0.5 W TA = 70 °C 0.32 Operating Junction & Storage Temperature Range Tj, Tstg -55 to 150 °C THERMAL RESISTANCE RATINGS THERMAL RESISTANCE SYMBOL TYPICAL MAXIMUM UNITS Junction-to-Ambient3 RJA 250 °C / W 1Limited by maximum junction temperature. 2Limited by package. 3The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. V(BR)DSS RDS(ON) ID 30V 450mΩ 0.75A

REV 1.0 M-43-3 N-Channel Logic Level MOSFET PA5S6EA SOT-23-6 Halogen-Free & Lead-Free NIKO-SEM ELECTRICAL CHARACTERISTICS (TJ = 25 °C, Unless Otherwise Noted) PARAMETER SYMBOL TEST CONDITIONS LIMITS UNIT MIN TYP MAX STATIC Drain-Source Breakdown Voltage V(BR)DSS VGS = 0V, ID = 250A 30 V Gate Threshold Voltage VGS(th) VDS = VGS, ID = 250A 0.4 0.8 1 Gate-Body Leakage IGSS VDS = 0V, VGS = ±10V ±30 A Zero Gate Voltage Drain Current IDSS VDS = 30V, VGS = 0V 1 VDS = 30V, VGS = 0V, TJ = 55 °C 10 Drain-Source On-State Resistance4 RDS(ON) VGS = 4.5V, ID = 0.5A 270 450 mΩ VGS = 4V, ID = 0.5A 290 470 VGS = 2.5V, ID = 0.25A 350 700 Forward Transconductance4 gfs VDS = 5V, ID = 0.5A 2 S DYNAMIC Input Capacitance Ciss VGS = 0V, VDS = 15V, f = 1MHz pF Output Capacitance Coss 22 Reverse Transfer Capacitance Crss 11 Total Gate Charge5 Qg VDS = 15V , VGS =4.5V, ID = 0.5A nC Gate-Source Charge5 Qgs 0.2 Gate-Drain Charge5 Qgd 0.2 Turn-On Delay Time5 td(on) VDD = 15V , ID  0.5A , VGS = 4.5V, RGEN = 6Ω nS Rise Time5 tr 36 Turn-Off Delay Time5 td(off) 96 Fall Time5 tf 45 SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS (TJ = 25 °C) Continuous Current IS 0.4 A Forward Voltage4 VSD IF = 0.5A, VGS = 0V 1.2 V Reverse Recovery Time trr IF = 0.5A, dI/dt = 100 A/μs 41 nS Reverse Recovery Charge Qrr 18 nC 4Pulse test : Pulse Width  300 sec, Duty Cycle  2％. 5Independent of operating temperature.

REV 1.0 M-43-3 N-Channel Logic Level MOSFET PA5S6EA SOT-23-6 Halogen-Free & Lead-Free NIKO-SEM Output Characteristics ID, Drain-To-Source Current(A) Transfer Characteristics ID, Drain-To-Source Current(A) VGS, Gate-To-Source Voltage(V) VDS, Drain-To-Source Voltage(V) Normalized Drain to Source ON-Resistance TJ , Junction Temperature(˚C) Capacitance Characteristic C , Capacitance(pF) VDS, Drain-To-Source Voltage(V) On-Resistance VS Temperature On-Resistance VS Gate-To-Source Voltage RDS(ON)ON-Resistance(OHM) VGS, Gate-To-Source Voltage(V) On-Resistance VS Drain Current RDS(ON)ON-Resistance(OHM) ID , Drain-To-Source Current(A) 0.5 1.5 -20℃ 125℃ 25℃ 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 -50 -25 0 25 50 75 100 125 150 VGS=4.5V ID=0.5A 0.6 1.2 1.8 2.4 0 1 2 3 4 5 VGS=1.3V VGS=1.7V VGS=2V VGS=4.5V VGS=4V VGS=2.5V 0.2 0.4 0.6 0.8 0 0.2 0.4 0.6 0.8 1 VGS=2.5V VGS=4V VGS=4.5V 0.2 0.4 0.6 0.8 ID=0.5A CISS COSS CRSS 0 5 10 15 20 25 30

REV 1.0 M-43-3 N-Channel Logic Level MOSFET PA5S6EA SOT-23-6 Halogen-Free & Lead-Free NIKO-SEM Gate charge Characteristics Characteristics Qg , Total Gate Charge(nC) VGS , Gate-To-Source Voltage(V) Source-Drain Diode Forward Voltage VSD, Source-To-Drain Voltage(V) IS , Source Current(A) Safe Operating Area Single Pulse Maximum Power Dissipation ID , Drain Current(A) Power(W) VDS, Drain-To-Source Voltage(V) Single Pulse Time(s) Transient Thermal Response Curve r(t) , Normalized Effective Transient Thermal Resistance T1 , Square Wave Pulse Duration(s) single pulse Duty cycle=0.5 0.2 0.1 0.05 0.02 0.01 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 Notes 1.Duty cycle, D= t1 / t2 2.RthJA = 250 ℃/W 3.TJ-TA = P*RthJA(t) 4.RthJA(t) = r(t)*RthJA 25℃ 150℃ 0.1 0.4 0.8 1.2 1.6 0.001 0.01 0.1 1 10 100 Single Pulse RθJA = 250 ˚C/W TA = 25˚C DC 100ms 10ms 1ms 0.01 0.1 0.1 1 10 100 NOTE : 1.VGS = 10V 2.TA =25˚C 3.RθJA = 250 ˚C/W 4.Single Pulse Operation in This Area is Limited by RDS(ON) 0.9 1.8 2.7 3.6 4.5 0 0.2 0.4 0.6 0.8 1 VDS=15V ID=0.5A