PA515BD NIKOSEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
REV 1.0 H-33-1 N-Channel Enhancement Mode Field Effect Transistor PA515BD TO-252 Halogen-Free & Lead-Free NIKO-SEM ABSOLUTE MAXIMUM RATINGS (TA = 25 °C Unless Otherwise Noted) PARAMETERS/TEST CONDITIONS SYMBOL LIMITS UNITS Gate-Source Voltage VGS ±20 V Continuous Drain Current2 TC = 25 °C ID A TC = 100 °C 7 Pulsed Drain Current1,2 IDM 30 Avalanche Current IAs 1.65 Avalanche Energy L = 1mH EAS 1.3 mJ Power Dissipation TC = 25 °C PD W TC = 100 °C 17 Operating Junction & Storage Temperature Range Tj, Tstg -55 to 150 °C THERMAL RESISTANCE RATINGS THERMAL RESISTANCE SYMBOL TYPICAL MAXIMUM UNITS Junction-to-Case RJC 2.8 °C / W Junction-to-Ambient RJA 62.5 1Pulse width limited by maximum junction temperature. 2Limited only by maximum temperature allowed. ELECTRICAL CHARACTERISTICS (TJ = 25 °C, Unless Otherwise Noted) PARAMETER SYMBOL TEST CONDITIONS LIMITS UNIT MIN TYP MAX STATIC Drain-Source Breakdown Voltage V(BR)DSS VGS = 0V, ID = 250A 150 V Gate Threshold Voltage VGS(th) VDS = VGS, ID = 250A 1.3 1.8 2.3 Gate-Body Leakage IGSS VDS = 0V, VGS = ±20V ±100 nA Zero Gate Voltage Drain Current IDSS VDS = 120V, VGS = 0V 1 VDS = 100V, VGS = 0V, TJ = 70 °C 10 1. GATE 2. DRAIN 3. SOURCE PRODUCT SUMMARY V(BR)DSS RDS(ON) ID 150V 150mΩ 11A G D S
REV 1.0 H-33-1 N-Channel Enhancement Mode Field Effect Transistor PA515BD TO-252 Halogen-Free & Lead-Free NIKO-SEM Drain-Source On-State Resistance1 RDS(ON) VGS = 4.5V, ID = 8A 107 250 mΩ VGS = 10V, ID = 8A 105 150 Forward Transconductance1 gfs VDS = 10V, ID = 8A 38 S DYNAMIC Input Capacitance Ciss VGS = 0V, VDS = 25V, f = 1MHz 1211 pF Output Capacitance Coss 73 Reverse Transfer Capacitance Crss 47 Gate Resistance Rg VGS = 0V, VDS = 0V, f = 1MHz 0.68 Ω Total Gate Charge2 Qg VDS = 75V, VGS = 10V, ID = 8A nC Gate-Source Charge2 Qgs 3.2 Gate-Drain Charge2 Qgd 9.3 Turn-On Delay Time2 td(on) 13 nS Rise Time2 tr VDD = 75V, 20 Turn-Off Delay Time2 td(off) ID 8A, VGS = 10V, RGS = 6Ω 43 Fall Time2 tf 52 SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS (TJ = 25 °C) Continuous Current IS 8 A Forward Voltage1 VSD IF = 8A, VGS = 0V 1.2 V Reverse Recovery Time trr IF = 8A, dI/dt=100A/μs 43 nS Reverse Recovery Charge Qrr 69 nC 1Pulse test : Pulse Width 300 sec, Duty Cycle 2％. 2Independent of operating temperature.
REV 1.0 H-33-1 N-Channel Enhancement Mode Field Effect Transistor PA515BD TO-252 Halogen-Free & Lead-Free NIKO-SEM Output Characteristics ID, Drain-To-Source Current(A) Transfer Characteristics ID, Drain-To-Source Current(A) VGS, Gate-To-Source Voltage(V) VDS, Drain-To-Source Voltage(V) Normalized Drain to Source ON-Resistance TJ , Junction Temperature(˚C) Capacitance Characteristic C , Capacitance(pF) VDS, Drain-To-Source Voltage(V) On-Resistance VS Temperature On-Resistance VS Gate-To-Source Voltage RDS(ON)ON-Resistance(OHM) VGS, Gate-To-Source Voltage(V) On-Resistance VS Drain Current RDS(ON)ON-Resistance(OHM) ID , Drain-To-Source Current(A) 25℃ 125℃ -20℃ 0 1 2 3 4 5 0 1 2 3 4 5 6 VGS=10V VGS=9V VGS=8V VGS=7V VGS=6V VGS=5V VGS=4.5V VGS=2.9V VGS=2.7V VGS=2.5V 0.1 0.2 0.3 0.4 0 4 8 12 16 20 VGS=10V VGS=4.5V 0.1 0.2 0.3 0.4 0.5 2 4 6 8 10 ID=8A CISS COSS CRSS 0 200 400 600 800 1000 1200 1400 0 5 10 15 20 25 30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -50 -25 0 25 50 75 100 125 150 VGS=10V ID=8A
REV 1.0 H-33-1 N-Channel Enhancement Mode Field Effect Transistor PA515BD TO-252 Halogen-Free & Lead-Free NIKO-SEM Gate charge Characteristics Characteristics Qg , Total Gate Charge(nC) VGS , Gate-To-Source Voltage(V) Source-Drain Diode Forward Voltage VSD, Source-To-Drain Voltage(V) IS , Source Current(A) Safe Operating Area Single Pulse Maximum Power Dissipation ID , Drain Current(A) Power(W) Single Pulse Time(s) VDS, Drain-To-Source Voltage(V) Transient Thermal Response Curve r(t) , Normalized Effective Transient Thermal Resistance T1 , Square Wave Pulse Duration(S) 0 7 14 21 28 35 VDS=75V ID=8A 25℃ 150℃ 0.1 100 DC 100ms 10ms 1ms 0.1 100 1 10 100 1000 NOTE : 1.VGS = 10V 2.TC =25˚C 3.RθJC = 2.8 ˚C/W 4.Single Pulse Operation in This Area is Limited by RDS(ON) 100 200 300 400 500 0.001 0.01 0.1 1 10 100 Single Pulse RθJC = 2.8 ˚C/W TC = 25˚C single pulse Duty cycle=0.5 0.2 0.1 0.05 0.02 0.01 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 Notes 1.Duty cycle, D= t1 / t2 2.RthJC = 2.8 ℃/W 3.TJ-TC = P*RthJC(t) 4.RthJC(t) = r(t)*RthJC