MCC56

MCC56-16IO1 IXYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

 International standard package, JEDEC TO-240 AA  Direct copper bonded Al 2O3 -ceramic base plate  Planar passivated chips  Isolation voltage 3600 V~  UL registered, E 72873  Gate-cathode twin pins for version 1B

Applications

 DC motor control  Softstart AC motor controller  Light, heat and temperature control Advantages  Space and weight savings  Simple mounting with two screws  Improved temperature and power cycling  Reduced protection circuits 6 745 TO-240 AA VRSM VRRM Type VDSM VDRM V V Version 1 B 8 B Version 1 B 8 B 900 800 MCC 56-08 io1 B / io8 B MCD 56-08 io1 B / io8 B 1300 1200 MCC 56-12 io1 B / io8 B MCD 56-12 io1 B / io8 B 1500 1400 MCC 56-14 io1 B / io8 B MCD 56-14 io1 B / io8 B 1700 1600 MCC 56-16 io1 B / io8 B MCD 56-16 io1 B / io8 B 1900 1800 MCC 56-18 io1 B / io8 B MCD 56-18 io1 B / io8 B 31 5 4 2 MCD Version 1 B MCC Version 8 B 36 1 5 2 MCD Version 8 B 31 5 2 MCC Version 1 B 36 7 1 5 4 2

© 2004 IXYS All rights reserved2 - 4 MCC 56 MCD 56 419 Symbol Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM 5m A VT, VF IT /IF = 200 A; TVJ = 25°C 1.57 V VT0 For power-loss calculations only (T VJ = 125°C) 0.85 V rT 3.7 m Ω VGT VD = 6 V; T VJ = 25°C 1.5 V TVJ = -40°C 1.6 V IGT VD = 6 V; T VJ = 25°C 100 mA TVJ = -40°C 200 mA VGD TVJ = TVJM; VD = 2/3 VDRM 0.2 V IGD 10 mA IL TVJ = 25°C; tP = 10 µs; VD = 6 V 450 mA IG = 0.45 A; diG/dt = 0.45 A/µs IH TVJ = 25°C; VD = 6 V; RGK = ∞ 200 mA tgd TVJ = 25°C; VD = ½ VDRM 2µ s IG = 0.45 A; diG/dt = 0.45 A/µs tq TVJ = TVJM; IT = 150 A, tP = 200 µs; -di/dt = 10 A/µs typ. 150 µs VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM QS TVJ = TVJM; IT, IF = 50 A, -di/dt = 3 A/µs 100 µC IRM 24 A RthJC per thyristor/diode; DC current 0.45 K/W per module other values 0.225 K/W RthJK per thyristor/diode; DC current see Fig. 8/9 0.65 K/W per module 0.325 K/W dS Creepage distance on surface 12.7 mm dA Strike distance through air 9.6 mm a Maximum allowable acceleration 50 m/s 2 Optional accessories for module-type MCC 56 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Dimensions in mm (1 mm = 0.0394") MCC / MCD / MDC Version 1 B MCC Version 8 B MCD Version 8 B 10 100 1000 100 1000 100 101 102 103 104 0.1 IG VG mA mA IG 1: IGT, TVJ = 125°C 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C µs tgd V 4: PGAV = 0.5 W 5: PGM = 5 W 6: PGM = 10 W IGD, TVJ = 125°C 5 6 Limittyp. TVJ = 25°C Fig. 1 Gate trigger characteristics Fig. 2 Gate trigger delay time Version 1 or 8 without B in typ designation = without insert in mountig holes

© 2004 IXYS All rights reserved 3 - 4 MCC 56 MCD 56 419 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 ∫i2dt versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus on- state current and ambient temperature (per thyristor or diode) Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature

© 2004 IXYS All rights reserved4 - 4 MCC 56 MCD 56 419 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: d R thJK (K/W) DC 0.65 180° 0.67 120° 0.69 60° 0.705 30° 0.72 Constants for Z thJK calculation: iR thi (K/W) t i (s) 1 0.014 0.015 2 0.026 0.0095 3 0.41 0.175 4 0.2 0.67 Constants for ZthJC calculation: iR thi (K/W) t i (s) 1 0.014 0.015 2 0.026 0.0095 3 0.41 0.175 RthJC for various conduction angles d: dR thJC (K/W) DC 0.45 180° 0.47 120° 0.49 60° 0.505 30° 0.52