DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Description
Ordering Information
The IAA110P Multifunction Telecom switch combines two 350V normally open (1-Form-A) relays and one optocoupler in a single package. The relays use optically coupled MOSFET technology to provide 3750V rms of input to output isolation. The efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division’s patented OptoMOS architecture while the inputs' highly efficient GaAIAs infrared LEDs control the outputs. The IAA110P allows telecom circuit designers to combine three discrete functions in a single component that occupies less space than traditional discrete component solutions. Telecommunications Telecom Switching Tip/Ring Circuits Modem Switching (Laptop, Notebook, Pocket Size) Hook Switch Dial Pulsing Ground Start Ringing Injection Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment-Patient/Equipment Isolation Security Aerospace Industrial Controls UL Recognized Component: File E76270 CSA Certified Component: Certificate 1305490 EN/IEC 60950-1 Certified Component: TUV Certificate: B 09 07 49410 006 3750Vrms Input/Output Isolation Three Functions in One Package Bidirectional Current Sensing Bidirectional Current Switching FCC Compatible No EMI/RFI Generation Small 16-Pin SOIC Package (PCMCIA Compatible) Machine Insertable, Wave Solderable Tape & Reel Version Available Form-A IF ILOAD 10% 90% ton toff Switching Characteristics of Normally Open Devices Parameter Rating Units Blocking Voltage 350 V P Load Current 100 mA rms / mADC On-Resistance (max) 35 1. (N/C) 2. + LED - Form A Relay #1 3. – LED - Form A Relay #1 4. + LED - Form A Relay #2 5. – LED - Form A Relay #2 6. Emitter - Phototransistor 7. Collector - Phototransistor 8. (N/C) 9. LED - Phototransistor +/– 10. LED - Phototransistor –/+ 11. Output - Form A Relay #2 12. Common Source Relay #2 13. Output - Form A Relay #2 14. Output - Form A Relay #1 15. Common Source Relay #1 16. Output - Form A Relay #1 (N/C) (N/C) (Form A) (Form A) Part # Description IAA110P 16-Pin SOIC (50/T ube) IAA110PTR 16-Pin SOIC (1000/Reel)
INTEGRATED CIRCUITS DIVISION www.ixysic.com2 R05 IAA110P Absolute Maximum Ratings @ 25ºC Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Parameter Ratings Units Input Control Current, Relay 50 mA T otal Package Dissipation 1 1W Isolation Voltage, Input to Output 3750 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate linearly 1.67 mW / ºC Electrical Characteristics @25ºC: Relay Section Parameter Conditions Symbol Min Typ Max Units Output Characteristics Blocking Voltage (Peak) I L=1AV L - - 350 V P Load Current Continuous - I L - - 100 mA rms / mADC Peak t=10ms I LPK - - 350 mA P On-Resistance I L=100mA R ON -- 3 5 Off-State Leakage Current V L=350V , TJ=25ºC I LEAK --1 A Switching Speeds T urn-On I F=5mA, VL=10V ton --3m s T urn-Off t off --3m s Output Capacitance V L=50V , f=1MHz C OUT -2 5 - p F Input Characteristics Input Control Current to Activate I L=100mA I F --5m A Input Control Current to Deactivate I L=1mA I F 0.4 - - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Voltage - V R --5 V Reverse Input Current V R=5V I R -- 1 0 A Parameter Conditions Symbol Min Typ Max Units Output Characteristics Phototransistor Blocking Voltage I C=10AB V CEO 20 50 - V Phototransistor Dark Current V CE=5V , IF=0mA I CEO - 50 500 nA Saturation Voltage I C=2mA, IF=16mA V SA T - 0.3 0.5 V Current T ransfer Ratio I F=6mA, VCE=0.5V CTR 33 - - % Input Characteristics Input Control Current I C=2mA, VCE=0.5V I F -26 m A Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Input Current (Detector Must be Off) I C=1A, VCE=5V - 5 25 - A Capacitance, Input to Output V L=50V , f=1MHz C I/O -3 - p F Isolation, Input to Output - V I/O 3750 - - V rms Electrical Characteristics @25ºC: Detector Section
INTEGRATED CIRCUITS DIVISION IAA110P www.ixysic.com 3R05 COMMON PERFORMANCE DATA* * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. LED Forward Voltage Drop (V) Device Count (N) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25ºC) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA Typical LED Forward Voltage Drop vs. Temperature Temperature (ºC) Turn-On Time (ms) Device Count (N) Typical Turn-On Time (N=50, IF=5mA, IL=100mADC, TA=25ºC) Turn-Off Time (ms) Device Count (N) Typical Turn-Off Time (N=50, IF=5mA, IL=100mADC, TA=25ºC) Device Count (N) Typical On-Resistance Distribution (N=50, IF=5mA, IL=100mADC, TA=25ºC) On-Resistance (:) LED Current (mA) Device Count (N) Typical IF for Switch Operation (N=50, IL=100mADC, TA=25ºC) LED Current (mA) Device Count (N) Typical IF for Switch Dropout (N=50, IL=100mADC, TA=25ºC) Blocking Voltage (V Device Count (N) Typical Blocking Voltage Distribution (N=50, TA=25ºC) LED Forward Current (mA) Turn-On Time (ms) 0 5 1 01 52 02 53 03 54 04 5 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 Typical Turn-On Time vs. LED Forward Current (IL=100mADC) LED Forward Current (mA) Turn-Off Time (ms) 0 5 1 01 52 02 53 03 54 04 5 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Typical Turn-Off Time vs. LED Forward Current (IL=100mADC) -40 -20 0 20 40 60 80 100 Temperature (ºC) On-Resistance (:) Typical On-Resistance vs. Temperature (IF=5mA, IL=100mADC) RELAY PERFORMANCE DATA*
INTEGRATED CIRCUITS DIVISION www.ixysic.com4 R05 IAA110P * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Forward Current (mA) Normalized CTR (%) 0 2 4 6 8 10 12 14 16 18 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 Typical Normalized CTR vs. Forward Current (VCE=0.5V) Normalized CTR (%) Temperature (ºC) -40 -20 0 20 40 60 80 120 100 IF=1mA IF=2mA IF=5mA IF=10mA IF=15mA IF=20mA Typical Normalized CTR vs. Temperature (VCE=0.5V) Forward Current (mA) Collector Current (mA) 0 2468 1 2 10 14 16 18 20 Typical Collector Current vs. Forward Current (VCE=0.5V) Turn-Off Time (ms) -40 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -20 0 20 40 60 80 100 Typical Turn-Off Time vs. Temperature (IF=5mA, IL=100mADC) Temperature (ºC) Load Current (mA) 180 160 140 120 100 Temperature (ºC) -40 -20 0 20 40 60 80 120 100 IF=20mA IF=10mA IF=5mA Maximum Load Current vs. Temperature LED Current (mA) -40 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 100 Typical IF for Switch Operation vs. Temperature (IL=100mADC) Temperature (ºC) LED Current (mA) -40 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 100 Temperature (ºC) Typical IF for Switch Dropout vs. Temperature (IL=100mADC) Load Voltage (V) Load Current (mA) 100 -20 -40 -60 -80 -100 Typical Load Current vs. Load Voltage (IF=5mA, TA=25ºC) Blocking Voltage (VP) -40 430 425 420 415 410 405 400 395 -20 0 20 40 60 80 100 Temperature (ºC) Typical Blocking Voltage vs. Temperature -40 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -20 0 20 40 60 80 100 Temperature (ºC) Leakage (PA) Typical Leakage vs. Temperature Measured Across Pins 14&16 or 11&13 Time Load Current (A) 10Ps 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1ms100Ps 100ms 1s10ms 10s 100s Energy Rating Curve Turn-On Time (ms) -40 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 100 IF=5mA IF=10mA IF=20mA Temperature (ºC) Typical Turn-On Time vs. Temperature (IL=100mADC) DETECTOR PERFORMANCE DATA* RELAY PERFORMANCE DATA (cont.)*
INTEGRATED CIRCUITS DIVISION IAA110P www.ixysic.com 5R05 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating IAA110P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time IAA110P 260ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. e3Pb
INTEGRATED CIRCUITS DIVISION Specification: DS-IAA110P-R05 ©Copyright 2012, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/19/2012 For additional information please visit our website at: www.ixysic.com IAA110P IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. MECHANICAL DIMENSIONS (inches) mm DIMENSIONS NOTES: 1. Coplanarity = 0.1016 (0.004) max. 2. Leadframe thickness does not include solder plating (1000 microinch maximum). 3. Sum of package height, standoff, and coplanarity does not exceed 2.108 (0.083).
8.890 TYP
(0.350 TYP)
0.406 TYP
(0.016 TYP) 10.160±0.381 (0.400±0.015) 7.493±0.127 (0.295±0.005) 10.363±0.127 (0.408±0.005)
1.270 TYP
(0.050 TYP)
0.635 X 45°
(0.025 X 45°) 0.254 ±0.0127 (0.010±0.0005)
1.016 TYP
(0.040 TYP) 0.508±0.1016 (0.020±0.004) PIN 1 PIN 16
2.108 MAX
(0.083 MAX) See Note 3 MAX: 0.102 (0.004) Lead to Package Standoff: 1.90 (0.075) 1.27 (0.050) 9.30 (0.366) 0.60 (0.024) PCB Land Pattern Dimensions mm (inches)Embossment Embossed Carrier Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 330.2 DIA. (13.00 DIA.) K0=3.20 (0.126) K1=2.70 (0.106) A0=10.90 (0.429) W=16 (0.630) B0=10.70 (0.421) P=12.00 (0.472) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 IAA110P IAA110PTR Tape & Reel