CPC1020N

CPC1020N IXYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

Description

Ordering Information

 Sensor Circuitry  Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Meters (Watt-Hour, Water, Gas)  Medical Equipment—Patient/Equipment Isolation  Aerospace  Industrial Controls  1500V rms Input/Output Isolation  Small 4-Pin SOP Package  Low Drive Power Requirements  High Reliability  Arc-Free With No Snubbing Circuits  No EMI/RFI Generation  Tape & Reel Version Available  Flammability Rating UL 94 V-0 The CPC1020N is a 30V, single-pole, normally-open (1-Form-A) Solid State Relay. The ultra-low on-resistance, 0.25, of this relay allows for high-current operation. IXYS Integrated Circuits' patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing 1500V rms input to output isolation. Control of the isolated output is accomplished by means of the highly efficient infrared LED at the input. Approvals Switching Characteristics of Normally-Open Devices Form-A IF ILOAD 10% 90% ton toff 2 3 + Control – Control Load Load  UL Recognized Component: File E76270  CSA Certified Component: Certificate 1172007  EN/IEC 60950-1 Certified Component: Certificate available on our website

INTEGRATED CIRCUITS DIVISION www.ixysic.com2 R05 CPC1020N Absolute Maximum Ratings @ 25ºC Parameter Ratings Units Blocking Voltage 30 V P Input Power Dissipation 1 75 mW Input Control Current 50 mA Peak (10ms) 1 A Reverse Input Voltage 5 V T otal Power Dissipation 2 400 mW Isolation voltage, Input to Output 1500 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate linearly 1.33 mW / ºC 2 Derate linearly 3.33 mW / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current Continuous 1 IF=2mA I L - - 1.2 A DC Peak t < 10ms I LPK --3 A On-Resistance 2 IL=1A R ON - 0.116 0.25  Off-State Leakage Current V L=30VP ILEAK --1 A Switching Speeds T urn-On I F=5mA, VL=10V ton - 0.48 3 ms T urn-Off t off - 0.65 3 Output Capacitance I F=0mA, VL=25V , f=1MHz C OUT -3 3 - p F Input Characteristics Input Control Current to Activate I L=1A I F - 0.13 2 mA Input Control Current to Deactivate - I F 0.1 - - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.5 V Reverse Input Current V R=5V I R - - 10 µA Input/Output Characteristics Capacitance, Input to Output V IO=0V , f=1MHz C IO -3 - p F 1 Load current derates linearly from 1.2A @ 25oC to 0.58A @85oC. 2 Measurement taken within 1 second of on-time. Electrical Characteristics @ 25ºC ESD Rating (Human Body Model)

1000 Volts

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. T ypical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements.

INTEGRATED CIRCUITS DIVISION CPC1020N www.ixysic.com 3R05 PERFORMANCE DATA* *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. Blocking Voltage (VP) Device Count (N) Typical Blocking Voltage Distribution (N=50) Turn-On Time (ms) Device Count (N) Typical Turn-On Time Distribution (N=50, IF=5mA, IL=5mA) Turn-Off Time (ms) Device Count (N) Typical Turn-Off Time Distribution (N=50, IF=5mA, IL=5mA) On-Resistance (:) Device Count (N) Typical On-Resistance Distribution (N=50, IF=2mA, IL=1A) LED Forward Current (mA) Device Count (N) Typical IF for Switch Operation (N=50, IL=100mA) LED Forward Voltage (V) Device Count (N) Typical LED Forward Voltage Drop (N=50, IF=5mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Current (mA) 0.08 0.10 0.12 0.14 0.16 0.18 0.20 Typical IF for Switch Operation vs. Temperature (IL=1A) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Voltage (V) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Typical LED Forward Voltage Drop vs. Temperature IF=2mA IF=5mA IF=50mA IF=20mA IF=10mA Load Voltage (V) Load Current (A) -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 Typical Load Voltage vs. Load Current (IF=2mA) LED Forward Current (mA) 0 1 02 0 3 04 05 0 Turn-On Time (ms) 0.5 1.0 1.5 2.0 2.5 Typical Turn-On Time vs. LED Forward Current (IL=100mA) LED Forward Current (mA) 0 1 02 03 04 05 0 Turn-Off Time (Ps) 600 620 640 660 680 700 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 On-Resistance (:) 0.10 0.15 0.20 0.25 0.30 0.35 0.40 Typical On-Resistance vs. Temperature (IF=2mA, IL=0.5A)

INTEGRATED CIRCUITS DIVISION www.ixysic.com4 R05 CPC1020N PERFORMANCE DATA* *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) 36.5 37.0 37.5 38.0 38.5 39.0 39.5 40.0 40.5 Typical Blocking Voltage vs. Temperature (IL=1PA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) 100 Typical Leakage Current vs. Temperature Measured Across Pins 3&4 (IF=0mA, VL=30V) Load Voltage (V) 0 5 10 15 20 25 Output Capacitance (pF) 100 110 Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) Time 10Ps 100 Ps 1ms 10ms 100ms 1s 10s 100s Current (A) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Energy Rating Curve Temperature (ºC) -40 -20 0 20 40 60 80 100 Load Current (ADC) 0.0 0.25 0.50 0.75 1.00 1.25 1.50 Maximum Load Current vs. Temperature (IF=2mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-On Time (ms) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Typical Turn-On Time vs. Temperature (IL=100mA) IF=2mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-Off Time (ms) 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Typical Turn-Off Time vs. Temperature (IL=100mA) IF=2mA IF=5mA

INTEGRATED CIRCUITS DIVISION CPC1020N www.ixysic.com 5R05 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classifi cation CPC1020N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classifi cation Temperature (Tc) Dwell Time (t p) Max Refl ow Cycles CPC1020N 260ºC 30 seconds 3 Board Wash IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.

INTEGRATED CIRCUITS DIVISION IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1020N-R05 ©Copyright 2018, IXYS Integrated Circuits OptoMOS® is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. 6/1/2018 For additional information please visit our website at: www.ixysic.com CPC1020N Dimensions mm (inches) NOTE: All dimensional tolerances per Standard EIA-481-2 except as notedEmbossment Embossed Carrier

330.2 Dia

(13.00 Dia) Top Cover Tape Thickness

0.102 Max

(0.004 Max) User Direction of FeedUser Direction of Feed K0=2.70 (0.106) K1=2.30 (0.091) B0=4.70 (0.185) W=12.00 (0.472) P1=8.00 (0.315)A0=6.50 (0.256) MECHANICAL DIMENSIONS CPC1020N CPC1020NTR Tape & Reel Recommended PCB Land Pattern 2.54 (0.10) 3.85 (0.152) 1.54 (0.061) 0.60 (0.024) Dimensions mm (inches) Pin 1 4.089 ± 0.025 (0.161 ± 0.001)

2.54 Typ

(0.100 Typ) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.025 (0.022 ± 0.005) 0.910 ± 0.025 (0.036 ± 0.001) 2.030± 0.025 (0.080± 0.001) 0.381 ± 0.025 (0.015 ± 0.001) Package standoff: 0.064 ± 0.040 (0.0025 ± 0.0015) 0-0.1 (0-0.004) 0.481 (0.019) 0.203 ± 0.025 (0.008 ± 0.001) Note: 1. Lead dimensions do not include plating: 1000 microinches max.