DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Description

Ordering Information

 Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Meters (Watt-Hour, Water, Gas)  Medical Equipment—Patient/Equipment Isolation  Security  Aerospace  Industrial Controls  1500V rms Input/Output Isolation  Small 4-Pin SOP Package  Low Drive Power Requirements  High Reliability  Arc-Free With No Snubbing Circuits  No EMI/RFI Generation  Tape & Reel Version Available The CPC1010N is a miniature single-pole, normally open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500V rms of input to output isolation. The efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division’s patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient infrared LED. IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging makes the CPC1010N one of the world’s smallest relays. It offers board space savings over the competitor’s larger 4-pin SOP relay. Approvals  UL Recognized Component: File E76270  CSA Certified Component: Certificate 1172007  EN/IEC 60950-1 Certified Component: TUV Certificate B 13 12 82667 003 Switching Characteristics of Normally Open Devices Form-A IF ILOAD 10% 90% ton toff 2 3 + Control – Control Load Load

INTEGRATED CIRCUITS DIVISION www.ixysic.com2 R01 CPC1010N Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Absolute Maximum Ratings @ 25ºC Parameter Ratings Units Blocking Voltage 250 VP Reverse Input Voltage 5 V Input Control Current 50 mA Peak (10ms) 1 A Input Power Dissipation 1 70 mW T otal Power Dissipation 2 400 mW Isolation Voltage, Input to Output 1500 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate linearly 1.33 mW / ºC 2 Derate linearly 3.33 mW / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current Continuous 1 -I L 170 mArms / mADC Peak t=10ms I LPK - - ±350 mA P On-Resistance 2 IL=170mA R ON - 8.5 11.5  Off-State Leakage Current V L=250VP ILEAK -- 1 µ A Switching Speeds T urn-On I F=5mA, VL=10V ton -- 3 ms T urn-Off t off -- 3 Output Capacitance I F=0mA, VL=20V , f=1MHz C OUT -9 - p F Input Characteristics Input Control Current to Activate 3 IL=100mA I F - 0.6 2 mA Input Control Current to Deactivate - I F 0.1 - - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.4 V Reverse Input Current V R=5V I R - - 10 µA Input/Output Characteristics Capacitance Input to Output V IO=0V , f=1MHz C IO -1 - p F 1 Load current derates linearly from 170mA @ 25oC to 105mA @85oC. 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 4mA is recommended. Electrical Characteristics @ 25ºC

INTEGRATED CIRCUITS DIVISION CPC1010N www.ixysic.com 3R01 * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Voltage (V) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Typical LED Forward Voltage Drop vs. Temperature IF=50mA IF=20mA IF=10mA IF=5mA IF=2mA LED Current (mA) 0 1 02 03 04 05 0 Turn-On Time (ms) 0.0 0.5 1.0 1.5 2.0 Typical Turn-On Time vs. LED Forward Current LED Current (mA) 0 1 02 03 04 05 0 Turn-Off Time (ms) 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 Typical Turn-Off Time vs. LED Forward Current Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Current (mA) 0.25 0.30 0.35 0.40 0.45 Typical IF to Operate vs. Temperature (IL=100mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-On Time (ms) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Typical Turn-On Time vs. Temperature (VL=10V) IF=10mA IF=2mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-Off Time (ms) 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 Typical Turn-Off Time vs. Temperature (VL=10V) IF=10mA IF=5mA IF=2mA Temperature (ºC) -40 -20 0 20 40 60 80 100 On-Resistance (:) Typical On-Resistance vs. Temperature (IF=2mA) IL=170mA IL=20mA Load Voltage (V) Load Current (mA) -200 -150 -100 -50 100 150 200 Typical Load Current vs. Load Voltage (IF=2mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) 260 270 280 290 300 310 Typical Blocking Voltage vs. Temperature (IF=0mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Leakage Current (nA) Typical Leakage vs. Temperature (IF=0mA, VL=250V) Load Voltage (V) 0 50 100 150 200 250 Output Capacitance (pF) 100 Typical Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) Temperature (ºC) -40 -20 0 20 40 60 80 100 Load Current (mA) 100 120 140 160 180 200 Maximum Load Current vs. Temperature

INTEGRATED CIRCUITS DIVISION www.ixysic.com4 R01 CPC1010N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classifi cation CPC1010N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be above (TC - 5)ºC. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classifi cation Temperature (Tc) Dwell Time (t p) Max Refl ow Cycles CPC1010N 260ºC 30 seconds 3 Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.

INTEGRATED CIRCUITS DIVISION IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1010N-R01 ©Copyright 2016, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 8/10/2016 For additional information please visit our website at: www.ixysic.com CPC1010N Dimensions mm (inches) NOTE: All dimensional tolerances per Standard EIA-481-2 except as notedEmbossment Embossed Carrier

330.2 Dia

(13.00 Dia) Top Cover Tape Thickness

0.102 Max

(0.004 Max) User Direction of FeedUser Direction of Feed K0=2.70 (0.106) K1=2.30 (0.091) B0=4.70 (0.185) W=12.00 (0.472) P=8.00 (0.315)A0=6.50 (0.256) MECHANICAL DIMENSIONS Recommended PCB Land Pattern 2.54 (0.10) 5.60 (0.2205) 1.30 (0.0512) 0.60 (0.0217) Dimensions mm (inches) Pin 1 4.089 ± 0.203 (0.161 ± 0.008)

2.54 Typ

(0.100 Typ) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.017 ± 0.005) 0.200 ± 0.025 (0.008 ± 0.001) 1.02 ± 0.025 (0.040 ± 0.001)

2.184 Max

(0.086 Max) 0.381 TYP . (0.015 TYP .) Pin to package standoff: 0.0637 ± 0.0383 (0.0025 ± 0.0015) 0.762 ± 0.102 (0.030 ± 0.004) CPC1010N CPC1010NTR Tape & Reel