DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Description

Ordering Information

 Instrumentation  Multiplexers  Data Acquisition  Electronic Switching  I/O Subsystems  Meters (Watt-Hour, Water, Gas)  Medical Equipment—Patient/Equipment Isolation  Security Systems  Aerospace  Industrial Controls  Reed Relay Replacement  1500Vrms Input/Output Isolation  Small 4-Pin SOP Package  Low Drive Power Requirements  High Reliability  Arc-Free With No Snubbing Circuits  No EMI/RFI Generation  Halogen-Free  Tape & Reel Version Available  Flammability Rating UL 94 V-0 CPC1008N is a miniature, low-voltage, low on-resistance, single-pole, normally open (1-Form-A) solid state relay in a 4-Pin SOP package. It uses IXYS Integrated Circuits Division’s patented, optically coupled, OptoMOS architecture to provide 1500Vrms of input/output isolation. Using IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging, the CPC1008N is one of the world’s smallest relays. It is ideal for replacing larger, less-reliable reed and electromechanical relays. Approvals  UL Recognized Component: File E76270  CSA Certified Component: Certificate 1172007  EN/IEC 60950-1 Certified Component: Certificate B 13 12 82667 003 Switching Characteristics of Normally Open Devices Form-A IF ILOAD 10% 90% ton toff 2 3 + Control – Control Load Load

INTEGRATED CIRCUITS DIVISION www.ixysic.com2 R11 CPC1008N Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements Absolute Maximum Ratings @ 25ºC Parameter Ratings Units Blocking Voltage 100 V P Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA Input Power Dissipation 70 mW T otal Power Dissipation 1 400 mW Isolation Voltage, Input to Output (60 Seconds) 1500 V rms Operational T emperature -40 to +85 °C Storage T emperature -40 to +125 °C 1 Derate linearly 3.33 mW / ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current Continuous 1 -I L 150 mA rms / mADC Peak t=10ms I LPK - - ±350 mA P On-Resistance 2 IL=150mA R ON - 4.8 8  Off-State Leakage Current V L=100VP ILEAK --1 µ A Switching Speeds T urn-On I F=5mA, VL=10V ton -12 ms T urn-Off t off - 0.17 1 Output Capacitance I F=0mA, VL=50V , f=1MHz C OUT -6- p F Input Characteristics Input Control Current to Activate 3 IL=150mA I F - 0.45 2 mA Input Control Current to Deactivate - I F 0.2 - - mA Input Voltage Drop I F=5mA V F 0.9 1.2 1.5 V Reverse Input Current V R=5V I R - - 10 µA Common Characteristics Capacitance, Input to Output V IO=0V , f=1MHz C IO -1- p F 1 Load current derates linearly from 150mA @ 25oC to 120mA @ 85oC. 2 Measurement taken within 1 second of on time. 3 For high temperature operation (>60ºC) a minimum LED drive current of 4mA is recommended. Electrical Characteristics @ 25ºC

INTEGRATED CIRCUITS DIVISION CPC1008N www.ixysic.com 3R11 LED Forward Voltage (V) Device Count (N) Typical LED Forward Voltage Drop (N=50, IF=5mA) Turn-On Time (ms) Device Count (N) Typical Turn-On Time (N=50, IF=5mA, IL=100mA) Turn-Off Time (ms) Device Count (N) Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) LED Current (mA) Device Count (N) Typical IF for Switch Operation (N=50, IL=100mA) On-Resistance (:) Device Count (N) Typical On-Resistance Distribution (N=50, IF=2mA, IL=150mA) Blocking Voltage (VP) 106 109 112 115 118 121 124 Device Count (N) Typical Blocking Voltage Distribution (N=50) Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Current (mA) 0.0 0.2 0.4 0.6 0.8 1.0 Typical IF for Switch Operation vs. Temperature (IL=120mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-On Time (ms) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Typical Turn-On Time vs. Temperature IF=10mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 Turn-Off Time (ms) 0.0 0.2 0.4 0.6 0.8 1.0 Typical Turn-Off Time vs. Temperature IF=10mA IF=5mA Temperature (ºC) -40 -20 0 20 40 60 80 100 LED Forward Voltage (V) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Typical LED Forward Voltage Drop vs. Temperature IF=50mA IF=20mA IF=10mA IF=5mA IF=2mA LED Current (mA) 0 1 02 03 04 05 0 Turn-On Time (ms) 0.0 0.5 1.0 1.5 2.0 2.5 Typical Turn-On Time vs. LED Forward Current LED Current (mA) 0 1 02 03 04 05 0 Turn-Off Time (ms) 0.00 0.05 0.10 0.15 0.20 0.25 Typical Turn-Off Time vs. LED Forward Current PERFORMANCE DATA* *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department.

INTEGRATED CIRCUITS DIVISION www.ixysic.com4 R11 CPC1008N PERFORMANCE DATA* Temperature (ºC) -40 -20 0 20 40 60 80 100 On-Resistance (:) Typical On-Resistance vs. Temperature (IF=2mA, IL=120mA) Load Voltage (V) Load Current (mA) -200 -150 -100 -50 100 150 200 Typical Load Current vs. Load Voltage (IF=2mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Load Current (mA) 100 110 120 130 140 150 160 Maximum Load Current vs. Temperature (IF=5mA) Temperature (ºC) -40 -20 0 20 40 60 80 100 Blocking Voltage (VP) 108 110 112 114 116 118 120 Typical Blocking Voltage vs. Temperature Temperature (ºC) -40 -20 0 20 40 60 80 100 Typical Leakage vs. Temperature (VL=100V) Leakage (nA) Load Voltage (V) 0 2 04 06 08 0 1 0 0 Output Capacitnace (pF) Output Capacitance vs. Load Voltage (IF=2mA, f=1MHz) Time (s) 10Ps 100 Ps 1ms 10ms 100ms 1s 10s 100s Load Current (A) 0.0 0.2 0.4 0.6 0.8 1.0 Energy Rating Curve *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department.

INTEGRATED CIRCUITS DIVISION CPC1008N www.ixysic.com 5R11 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classifi cation CPC1008N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classifi cation Temperature (Tc) Dwell Time (t p) Max Refl ow Cycles CPC1008N 260ºC 30 seconds 3 Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.

INTEGRATED CIRCUITS DIVISION IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1008N-R11 ©Copyright 2017, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 5/25/2017 For additional information please visit our website at: www.ixysic.com CPC1008N MECHANICAL DIMENSIONS Dimensions mm (inches) NOTE: All dimensional tolerances per Standard EIA-481-2 except as notedEmbossment Embossed Carrier

330.2 Dia

(13.00 Dia) Top Cover Tape Thickness

0.102 Max

(0.004 Max) User Direction of FeedUser Direction of Feed K0=2.70 (0.106) K1=2.30 (0.091) B0=4.70 (0.185) W=12.00 (0.472) P=8.00 (0.315)A0=6.50 (0.256) CPC1008N CPC1008NTR Tape & Reel Recommended PCB Land Pattern 2.54 (0.10) 5.50 (0.217) 1.45 (0.057) 0.55 (0.022) Dimensions mm (inches) Pin 1 4.089 ± 0.025 (0.161 ± 0.001)

2.54 Typ

(0.100 Typ) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.025 (0.022 ± 0.005) 0.910 ± 0.025 (0.036 ± 0.001) 2.030± 0.025 (0.080± 0.001) 0.381 TYP . (0.015 TYP .) Pin to package standoff: 0.064 ± 0.040 (0.0025 ± 0.0015) 0-0.1 (0-0.004) 0.481 (0.019)

0.203 Typ

(0.008 Typ)