885067 QORVO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

2.4GHz WLAN/BT LTE Co-Existence Filter

885067 DS20180731 REV E | Subject to change without notice

1 of 7 www.qorvo.com ADVANCE D ADVANCED Product Overview The 885067 is a high -performance, high power Bulk Acoustic Wave (BAW) band -pass filter with extremely steep skirts, simultaneously exhibiting low loss in the WiFi band and high near-in rejection in the 2.6GHz bands. 885067 is specifically designed to enable coexist ence of WiFi and LTE signals within the same device or in close proximity to one another. The 885067 uses common module packaging techniques to achieve the industry standard 1. 1 x 0.9 x 0. 50 mm footprint. The filter exhibits excellent power handling capabilities. Functional Block Diagram Top View 1.1x0.9x0.50 mm Key Features

  • Low Loss in WLAN band with extended upper corner for inclusion of Bluetooth
  • High Rejection in B7/B41 bands
  • Industry leading small size: 1.1 x 0.9 x 0.5 mm
  • Performance over -30 to +85 º C
  • Single Ended operation
  • RoHS compliant, Pb-free module package

Applications

  • WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TD-LTE) & WiFi signals
  • Handsets
  • Portable Hotspots
  • Mobile Routers
  • Smart Meters
  • High-power WLAN Access Points
  • Applicable reject bands: 2.6 GHz WiMAX/LTE, LTE Band 7

Ordering Information

885067 Packaged part

885067-EVB Evaluation board Standard T/R size = 15,000 units/reel

2.4GHz WLAN/BT LTE Co-Existence Filter 885067 DS20180731 REV E | Subject to change without notice 2 of 7 www.qorvo.com Absolute Maximum Ratings Parameter Conditions Storage Temperature (1) -40 to +85°C Operable Temperature (2) -30 to +85°C Absolute Maximum Input Power (3) +36 dBm Notes: 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Specifications are not guaranteed over all operable conditions. 3. Max CW signal applied for up to 500 msec with no damage Electrical Specifications(1,4) Conditions unless otherwise noted: Device Temperature = -30°C to +85°C. Parameter Conditions Min. Typ (+25°C) Max Units Insertion Loss (2) 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 1.4 1.2 1.2 1.3 1.5 1.7 1.5 1.5 1.6 2.0 dB Passband Ripple 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 1.0 0.75 0.7 0.6 1.0 1.4 1.0 1.1 1.4 2.1 dB Rejection/Attenuation 925 – 960 MHz 30 33.0 - dB 1559 – 1606 MHz 32 34.0 - dB 2110 – 2170 MHz 44 47.0 - dB 2300 – 2370 MHz (3) 35 39.0 - dB 2500 – 2505 MHz (+25 to +85˚C) (3) 2500 – 2505 MHz (-30 to +25˚C) (3) 36.0 28.0 - dB 2505 – 2570 MHz (+25 to +85˚C) (3) 2505 – 2570 MHz (-30 to +25˚C) (3) 50.0 44.0 - dB 2570 – 2620 MHz (3) 47 52.0 - dB 2620 – 2690 MHz (3) 45 50.0 - dB 4800 – 5000 MHz 30 34.0 - dB 7200 – 7500 MHz 30 33.0 - dB VSWR, In & Out 2402.5 – 2481.5 MHz - 1.8 2.1:1 - RF Input Power(5) 2400 – 2483 MHz 24 dBm Notes: 1. In production, devices will be tested at room temperature to a guard -banded specification to ensure electrical compliance over temperature 2. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature. 3. Data is the integrated value of the linear s-parameter over 5MHz range at the specified temperature. 4. An external impedance matching network with ±2% tolerance will be necessary to achieve the stated specifications. This is the optimum impedance in order to achieve the performance shown 5. Input power applied for a minimum of 5,000 hrs at 55°C in the frequency band specified.

2.4GHz WLAN/BT LTE Co-Existence Filter 885067 DS20180731 REV E | Subject to change without notice 3 of 7 www.qorvo.com Evaluation Board Notes 1. Matching component values shown are for the specified Qorvo evaluation board. Value adjustment may be required in end user p roduct circuits depending on component manufacturer and PCB material. Bill of Material Ref. Des. Value Description Manufacturer Part Number L1 10nH Chip Inductor, 0201, +/- 2% Murata LQP03TH10NH02D L2 10nH Chip Inductor, 0201, +/- 2% Murata LQP03TH10NH02D PCB N/A 3-layer Multiple TBD

2.4GHz WLAN/BT LTE Co-Existence Filter 885067 DS20180731 REV E | Subject to change without notice 4 of 7 www.qorvo.com Performance Plots Test conditions unless otherwise noted: Temp= +25°C

2.4GHz WLAN/BT LTE Co-Existence Filter 885067 DS20180731 REV E | Subject to change without notice 5 of 7 www.qorvo.com Pin Configuration Pin Number Description

1 Input

4 Output (to Antenna)

2,3,5 Ground* *Note, see application section for details on optimal grounding Package Information, Marking and Dimensions ADVANCED Package Style: CSP Dimensions: 1.1 x 0.9 x 0.50 mm Package for Surface Mount Technology Terminations: Au plating 0.5 - 1.0μm, over a 2- 6μm Ni Plating Approximate weight 1.37mg Marking Code uniquely identifies Part Number M = Manufacturing site (Blank for Apopka, C for Costa Rica) Date code consists of: WW = 2 digit week, Y = last digit of year An asterisk (*) in front of the marking code indicates prototype. All dimensions shown are nominal in millimeters

2.4GHz WLAN/BT LTE Co-Existence Filter 885067 DS20180731 REV E | Subject to change without notice 6 of 7 www.qorvo.com PCB Mounting Pattern Notes: 1. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. 2. All dimensions are in millimeters. Angles are in degrees Tape and Reel Information Standard T/R size = 15,000 units/reel. All dimensions are in millimeters 0.205 0.7752X 0.225 0.975 0.18 5X 0.275 ADVANCED 8.8 ID dot 2.0 Direction of travel Ø 330 Ø 20.2 Ø 13.0 Ø 102 2.7 1.75 3.5 Ko 8.0 A A 2.0 4.0 4.0 Ø 0.50 Ø 1.5 1.30 Ko 0.61 Ko 0.25 Section A-A 1.10 Ko Section B-B B B Ko = +/- .05 0.61 Ko (Bridge Height) (5°)

2.4GHz WLAN/BT LTE Co-Existence Filter 885067 DS20180731 REV E | Subject to change without notice 7 of 7 www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD sensitive device ESD – Human Body Model (HBM) Class 1C ANSI / ESDA / JEDEC JS-001 ESD – Charged Device Model (CDM) Class C3 ANSI / ESDA / JEDEC JS-002 MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Solderability Compatible with the latest version of J-STD-020, lead free solder, 260°C RoHS Compliance This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment), as amended by Directive 2015/863/EU.

  • Lead free
  • Halogen Free (Chlorine, Bromine)
  • Antimony Free
  • TBBP-A (C15H12Br402) Free
  • PFOS Free
  • SVHC Free Pb Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change w ithout notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such inf ormation does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such in formation. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIM S ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc .