TGL2205-SM QORVO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 1 of 9 www.qorvo.com

24 Pad 4 x 4 mm Air Cavity QFN Package

  • Frequency Range: 2 to 6 GHz
  • Insertion Loss: < 0.6 dB
  • Peak Power Handling: 100 W
  • Flat Leakage: < 16.5 dBm
  • Spike Leakage < 17 dBm
  • Passive (no DC bias required)
  • Integrated DC Blocks on the output
  • Recovery time < 115 ns
  • Package Dimensions: 4.00 x 4.00 x 1.47 mm Performance is typical across frequency. Please reference electrical specification table and data plots for more details. Product Overview The Qorvo TGL2205–SM is a high power, wideband GaAs VPIN limiter capable of protecting sensitive receive channel components against high pow er incident signals. The TGL2205–SM does not require DC bias , and achieves a low insertion loss all in a small form factor. These features allow for simple integration with minimal impact to system performance. The TGL2205 –SM operates from 2–6 GHz with low insertion loss of less than 0.6 dB. It can limit up to 100 W incident pulsed-power with a low flat leakage of less than 16.5 dBm. The TGL2205–SM is offered as a packaged limiter, and is well suited for both commercial and defense related applications. Lead-free and RoHS compliant.

Ordering Information

1095765 2-6 GHz 100W VPIN Limiter

1095768 TGL2205-SM, EVAL BOARD

TGL2205-SMTR7 250 Piece 7” Reel Functional Block Diagram Top View

Applications

  • Receive Chain Protection
  • Commercial and Military Radar

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 2 of 9 www.qorvo.com Recommended Operating Conditions Parameter Min Typ. Max Units Passive – No Bias Operating Temperature Range -40 +25 +85 °C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Absolute Maximum Ratings Parameter Rating Incident Power, CW or Pulsed, 50 , 25 °C 100 W Incident Power, CW or Pulsed, 50 , 85 °C 50 W Mounting Temperature (30 s max) 260 °C Storage Temperature -40 to 150 °C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Parameter Conditions (1) Min Typ. Max Units Operational Frequency Range 2 6 GHz Insertion Loss < 0.6 dB Input Return Loss 12 dB Output Return Loss 12 dB Flat Leakage Power at PIN > 30 dBm < 16.5 dBm Pulse Recovery Time < 115 ns Spike Leakage < 17 dBm Insertion Loss Temperature Coefficient 0.003 dB/ °C Notes: 1. Test conditions unless otherwise noted: Temp = +25 °C, Tuned EVB Results. Thermal and Reliability Information Parameter Test Conditions Value Units Incident Power (RF Operational Life Test (1))

4.5 GHz, CW, 50 , 25 °C 31 W

4.5 GHz, Pulsed, PW=10 µs, DC=10%, 50 , 25 °C 100 W

Notes: 1. Test terminated after 168 hours. Insertion Loss remained ≤ 1 dB for device under test.

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 3 of 9 www.qorvo.com Performance Plots – Small & Large Signal Test conditions unless otherwise noted: CW Power, Temp.=+25 °C, Tuned EVB Performance -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0 1 2 3 4 5 6 7 8 S21 (dB) Frequency (GHz) Gain vs. Frequency vs. Temp. - 40 °C +25 °C +85 °C 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Output Power (dBm) Input Power (dBm) Output Power vs. Input Power vs. Freq.

2.0 GHz

3.0 GHz

4.0 GHz

5.0 GHz

6.0 GHz

Temp. = 25 °C CW -30 -25 -20 -15 -10 0 1 2 3 4 5 6 7 8 S11 (dB) Frequency (GHz) Input Return Loss vs. Freq. vs. Temp. - 40 °C +25 °C +85 °C 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Output Power (dBm) Input Power (dBm) Output Power vs. Input Power vs. Temp. Frequency = 3.5 GHz - 40 °C +25 °C +85 °C CW -30 -25 -20 -15 -10 0 1 2 3 4 5 6 7 8 S22 (dB) Frequency (GHz) Output Return Loss vs. Freq. vs. Temp. - 40 °C +25 °C +85 °C 30 32 34 36 38 40 42 44 46 Output Power (dBm) Input Power (dBm) Output Power vs. Input Power vs. Temp. Frequency = 3.5 GHz - 40 °C +25 °C +85 °C CW

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 4 of 9 www.qorvo.com Performance Plots – Small & Large Signal Test conditions unless otherwise noted: CW power, Temp.=+25 °C, Tuned EVB Performance 30 32 34 36 38 40 42 44 46 48 50 52 Output Power (dBm) Input Power (dBm) Output Power vs. Input Power vs. Freq.

2.1 GHz

2.5 GHz

3.5 GHz

3.7 GHz

Temp. = 25 °C CW 30 32 34 36 38 40 42 44 46 48 50 52 Output Power (dBm) Input Power (dBm) Output Power vs. Input Power vs. Freq. 3.7 GHzTemp. = 25 °C Pulsed: PW = 10µs, DC = 10% -30 -25 -20 -15 -10 -6.0 -5.0 -4.0 -3.0 -2.0 -1.0 0.0 0 1 2 3 4 5 6 7 8 S11. S22 (dB) S21 (dB) Frequency (GHz) S-Parameters vs. Freq., Untuned EVB S21 S11 S22 Temp. = 25 °C -30 -25 -20 -15 -10 -6.0 -5.0 -4.0 -3.0 -2.0 -1.0 0.0 0 1 2 3 4 5 6 7 8 S11. S22 (dB) S21 (dB) Frequency (GHz) S-Parameters vs. Freq., Tuned EVB S21 S11 S22 Temp. = 25 °C

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 5 of 9 www.qorvo.com Evaluation Board (EVB) & Mounting Detail Mounting Detail Notes: microstrip line taper at the connector interface is optimized for the Southwest Microwave end-launch connector 1092-02A-5. 2. The pad pattern shown has been developed and tested for optimized assembly at Qorvo. The PCB land pattern has been developed to accommodate lead and package tolerances. Since surface mount processes vary from company to company, careful process development is recommended. 3. Ground / thermal vias under the DUT are critical for the proper performance of this device. 4. The EVB shown herein utilizes copper filled vias (8 mil diameter) under the DUT to maximize heat transfer away from the DUT under large signal conditions. 5. Thermal dissipation is low for normal non-limiting operation.

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 6 of 9 www.qorvo.com Pad Configuration and Description Bottom View Pad No. Label Description 1,2,4,6,7,12,13, 15,17-19,24,25 GND On PCB, multiple copper-filled vias should be employed under the center pad to minimize inductance and thermal resistance. See page 5 for suggested mounting configuration

3 RF Input RF Input, matched to 50 Ohms, not DC blocked

5,8-11,14,20-23 NC No connection; may be grounded if desired

16 RF Output RF Output, matched to 50 Ohms, DC blocked

NOTE: The RF Input and RF Output ports are not interchangeable.

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 7 of 9 www.qorvo.com Mechanical Information & Package Marking Dimensions are in millimeter. Tolerances are +/- 0.127 mm

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 8 of 9 www.qorvo.com Recommended Soldering Profile Assembly Notes

  • Compatible with lead-free soldering process with 260°C peak reflow temperature.
  • This package is non-hermetic, and therefore cannot be subjected to aqueous washing . The use of no-clean solder to avoid washing after soldering is recommended
  • Solder rework not recommended.
  • Contact plating: Ni-Au

TGL2205–SM 2 – 6 GHz 100 Watt VPIN Limiter Data Sheet Rev. D, June 2020 | Subject to change without notice 9 of 9 www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) Class 2 ESDA / JEDEC JS-001-2012 ESD – Charged Device Model (CDM) Class C3 JEDEC JESD22-C101 MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes:

  • Lead Free
  • Halogen Free (Chlorine, Bromine)
  • Antimony Free
  • TBBP-A (C15H12Br402) Free
  • PFOS Free
  • SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2020 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Pb