T4MK-F ELATEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
© 2023 – ELATEC GmbH – TWN4 MultiTech HF Mini data sheet – DocRev13 – EN – 11/2023 Page 1 of 3 TWN4 MultiTech HF Mini (TWN4 Mini Reader MIFARE NFC) Single -frequency HF RFID module with NFC support TWN4 MultiTech HF Mini (exemplary illustration) The RFID modules of the TWN4 MultiTech HF Mini family have been designed for integration into machines, handheld computers or any other device where small size matters. Thanks to their compact dimensions, the modules can be directly integrated into al most any host system . The host communication takes place via SPI or asynchronous serial TTL interface. Besides, the modules offer positions for the placement of two LEDs that can be controlled per software. For applications requiring additional security, an external Secure Access Module (SAM) can be connected. Key features of the TWN4 MultiTech HF Mini reader module include a powerful SDK for writing apps that are executed directly on the module, the possibility to upgrade the firmware in the field, transparent data exchange with the RFID media, and extremely compact dimensions that enable a module integration even into smaller systems or devices, like PC boards. Additionally, the module can read a lot of HF RFID technologies from the 13.56 MHz frequency band, including NFC. This gives the option to select as many of the technologies required instead of being forced to select just a few ones. Special features: + Possibility to read many HF RFID technologies + Cost-optimized RFID solution with integrated HF antenna (13.56 MHz) and low power consumption for versatile applications + Powerful SDK for writing apps which are executed directly on the module + Firmware update in the field possible + On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data + Supports transparent data exchange with RFID media + Development board for interface testing available on request
© 2023 – ELATEC GmbH – TWN4 MultiTech HF Mini data sheet – DocRev13 – EN – 11/2023 Page 2 of 3 TECHNICAL DATA FREQUENCY 13.56 MHz (HF) ANTENNA Integrated POWER 3.15 – 5.5 V DC PS2 classified power source according to IEC 62368-1, short-circuit current < 8 A CURRENT CONSUMPTION RF field on: 110 mA typically TEMPERATURE RANGE Operating: -25 °C up to +80 °C (-13 °F up to +176 °F) Storage: -40 °C up to +85 °C (-40 °F up to +185 °F) RELATIVE HUMIDITY 5% to 95% non-condensing READ/WRITE DISTANCE Up to 70 mm / 2.76 inch, depending on environment and transponder OPERATING MODES (USB) USB keyboard emulation – USB virtual COM port – CCID / PC/SC 2.01 MTBF 500,000 hours WEIGHT Approx. 4 g / 0.14 oz SUPPORTED OPTIONS AND TRANSPONDERS Depending on the firmware version and installed options, ELATEC readers and modules can support a wide range of RFID technologies. Please refer to the relevant ELATEC transponder matrix (available at www.elatec-rfid.com/int/transponder-technology) for more information about the available options and RFID technologies supported by the product. OS SUPPORT Windows 7 (32-/64-bit) and higher versions, Linux, MAC OS X1) PERIPHERAL INTERFACES USB, TTL serial (logic level 3.3 V, CMOS, 5 V tolerant), SPI1), 4 GPIOs, Clock/Data, Wiegand D0/D1 TRANSMISSION SPEED Host: USB full speed (12 Mbit/s), TTL serial: up to 115,200 baud, HF Air: up to 848 kbit/s CERTIFICATION NAME TWN4 Mini Reader MIFARE NFC CERTIFICATIONS Non-exhaustive list2): CE/RED, FCC, IC, REACH and RoHS-III compliant ORDER CODES T4MK-F Development board (including T4MR-F) T4MR-F Standard reader module (TTL serial) T4MR-F-U Standard reader module (USB) T4MR-F-I Reader module (TTL serial) with I option T4MR-F-UCCID Reader module (USB CCID) with I option 1)On request 2)The product has been certified for use in many countries and regions. Contact your Sales representative for detailed information about all certifications and approvals granted to the product.
© 2023 – ELATEC GmbH – TWN4 MultiTech HF Mini data sheet – DocRev13 – EN – 11/2023 Page 3 of 3 TECHNICAL DRAWINGS Pin spacing 2.54 mm [0.1 inch] ELATEC GmbH Zeppelinstr. 1
82178 Puchheim
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Systems GmbH Schwieberdinger Str. 44
71636 Ludwigsburg
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Inc.
1995 SW Martin Hwy
Palm City • FL 34990 USA P +1 772 210 2263 F +1 772 382 3749 E-Mail: americas-info@elatec.com Website: elatec.com ELATEC Technology (Shenzhen) LLC 918, Main Building, Tian An Cyber Times Tower, No. 6, Tairan Fourth Road, Tian 'an Community, Shatou Neighborhood Futian District • Shenzhen • China P/F +86 755 2394 6014 E-Mail: apac-info@elatec.com Website: elatec.com ELATEC reserves the right to change any information or data in this document without prior notice. ELATEC declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names used in this document are registered trademarks of their respective owners.