HKSI-B ELATEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
© 2023 – ELATEC GmbH –TCP3 data sheet – DocRev04 – 11/2023 Page 1 of 3 TCP3 Authentication / Release Station TCP3 (exemplary illustration) The main purpose of the TCP converters is to enable RFID authentication and access control for devices that lack a USB port, from older single-function printers to industrial robotics. They can be connected on one end to a Local Area Network (LAN) and on the other end to an RFID reader via USB cable. When the user presents a card to the reader, the information is sent over the network to a local server and depending on the response, a print job can be released or, in the example of industrial robotics, oper ator authorization granted. ELATEC RFID readers enable organizations to extend the use of their employee identification badge to authenticate for applications beyond physical access. This includes most multi -function printers and some single- function printers. Unfortunately, not all printers and devices have support for the direct connection of a USB proximity card reader, such as those with no USB port. In these situations, the ELATEC TCP3 authentication / release station extends ID card- based capabilities such as authentication and pull printing to any printing device regardless of the manufacturer, make or model. Special features: + Supports the direct connection of a USB proximity card reader + Extends use of employee identification badge to authenticate and provide access control + Minimizes IT support costs associated with additional IP or MAC addresses while consuming only one network drop from its host port + Can act as an Ethernet network router + Enables user authentication and access control for devices that lack a USB port + Allows simultaneous communication of print data and printer status at gigabit speeds + Configuration can be saved for later usage on other TCP3s thus saving expensive man hours + Supports USB 3.0 and gigabit Ethernet networks + Optionally available with Power-over-Ethernet as the source of power
© 2023 – ELATEC GmbH –TCP3 data sheet – DocRev04 – 11/2023 Page 2 of 3 TECHNICAL DATA HOUSING Material: ABS UL94-V0 Color: black POWER External power supply 5 V or internal Power over Ethernet (PoE) CURRENT CONSUMPTION Max. 3 A, depending on external load TEMPERATURE RANGE Operating: 0 °C up to +45 °C (+32 °F up to +113 °F) Storage: -40 °C up to +85 °C (-40 °F up to +185 °F) RELATIVE HUMIDITY 10% to 90% non-condensing NETWORK
10 Mbit/s, 100 Mbit/s, 1000 Mbit/s converter to Host or converter to Device
500 Mbit/s between Host & Device, upgradable to 1.2 Gbit/s at additional cost Host: DHCP, Static IP; Device: DHCP, Static IP OPERATING MODES TCP Server: Device is connected to a TCP client. TCP Client: Device connects automatically to a specified TCP server. The connection may be triggered by an incoming flow of data on either USB port. For additional security, the connection can be optionally SSL encrypted. Data can be sent via UDP or HTTPS via JSON. LAN COMMUNICATION PROTOCOLS TCP, UDP, HTTP, HTTPS, IPV4, DHCP, SSL/TSL1.2, Syslog USB Two USB 3.0 Host ports Maximum current: 1.6 A, shared between the two USB ports Supported devices: ELATEC TWN3 and TWN4 RFID devices, many magnetic stripe readers, many optical bar code readers and PIN pads via HID keyboard or CDC OPTICALLY ISOLATED I/O Two optically isolated outputs and one optically isolated input, traditionally used to support Foreign Device Interface or Internet of Things CONNECTORS Ethernet: 2 x RJ45, 10/100/1000BaseT. Host connector supports PoE USB: 2 x USB type A receptacle 8-pin connector for optically isolated signals Power: for plug 5.5 mm/2.1 mm LED INDICATORS 4 LEDs which use multi-color to indicate Power, Ready, Busy and Status MEMORY RAM: 2 GB Flash: 8 GB SDHC expansion: up to 2 TB MTBF 500,000 hours WEIGHT Approx. 270 g / 9.5 oz CERTIFICATION NAME TCP3 TCP3 POE CERTIFICATIONS Non-exhaustive list1): CE, FCC, IC, REACH and RoHS-III ORDER CODE(S) TC3K-BT5EU TCP3 kit with 0.5 m patch cable (RJ45) and power supply EU2) TC3K-BT5JP TCP3 kit with 0.5 m patch cable (RJ45) and power supply JP2) TC3K-BT5UK TCP3 kit with 0.5 m patch cable (RJ45) and power supply UK2) TC3K-BT5US TCP3 kit with 0.5 m patch cable (RJ45) and power supply US2) TC3K-BT5E1 TCP3 kit with 0.5 m patch cable (RJ45) and Power over Ethernet 1)The product has been certified for use in many countries and regions. Contact your Sales representative for detailed information about all certifications and approvals granted to the product. 2) Please also refer to the power supply data sheets.
© 2023 – ELATEC GmbH –TCP3 data sheet – DocRev04 – 11/2023 Page 3 of 3 DRAWING All measures in mm [inch] ELATEC GmbH Zeppelinstr. 1
82178 Puchheim
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Systems GmbH Schwieberdinger Str. 44
71636 Ludwigsburg
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Inc.
1995 SW Martin Hwy
Palm City • FL 34990 USA P +1 772 210 2263 F +1 772 382 3749 E-Mail: americas-info@elatec.com Website: elatec.com ELATEC Technology (Shenzhen) LLC 918, Main Building, Tian An Cyber Times Tower, No. 6, Tairan Fourth Road, Tian 'an Community, Shatou Neighborhood Futian District • Shenzhen • China P/F +86 755 2394 6014 E-Mail: apac-info@elatec.com Website: elatec.com ELATEC reserves the right to change any information or data in this document without prior notice. ELATEC declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names used in this document are registered trademarks of their respective owners.