T4W2-B01C7 ELATEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
© 2023 – ELATEC GmbH – TWN4 Palon Compact LEGIC M data sheet – DocRev04 – EN – 11/2023 Page 1 of 3 TWN4 Palon Compact LEGIC M Multi- frequency RFID module (LF/HF) with NFC and BLE support TWN4 Palon Compact LEGIC M (exemplary illustrations) The RFID readers and modules of the TWN4 Palon Compact family support two RFID frequencies (125 kHz / 13.56 MHz), NFC and Bluetooth Low Energy (BLE). All devices are available with an NXP or LEGIC SM-4200 frontend and support a wide range of interfaces, for instance USB, RS-485 and, optionally, the OSDP protocol. A cost-optimized “light” variant with fewer interfaces and without BLE is also available. Although the readers are general -purpose devices, they are particularly appropriate for time attendance and access control. Depending on the intended application, the readers are available as modules for integration into a host device, as panel mount readers with IP65 protection or as in-wall readers with an IP54 protected housing. Key features of the TWN4 Palon Compact LEGIC M reader module include an optimized form factor for easy integration into any host device, the possibility to use many different interfaces, a powerful SDK for writing apps that are executed directly on the module and an integrated BLE module. Additionally, the module can read more than 60 RFID technologies from low (LF) and high frequency (HF) bands, including NFC. This gives the option to select as many of the technologies required instead of being forced to select just a few ones. Special features: + Possibility to read more than 60 RFID technologies + Supports many interfaces, like USB, RS-485 and RS-232 (OSDP protocol optionally) + Two RFID frequencies (125 kHz/13.56 MHz), NFC and BLE in a compact form factor for easy integration + Powerful SDK for writing apps which are executed directly on the module + Firmware update in the field possible + On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data + Supports transparent data exchange with RFID media + CCID and PC/SC 2.01
© 2023 – ELATEC GmbH – TWN4 Palon Compact LEGIC M data sheet – DocRev04 – EN – 11/2023 Page 2 of 3 TECHNICAL DATA FREQUENCIES 125 kHz (LF) / 13.56 MHz (HF) / 2.4 GHz (BLE) ANTENNAS Integrated Refer to the TWN4 Palon Technical Handbook (DevPack documentation) for tolerances POWER Micro USB: 4.3 V – 5.5 V Connector X1: 9.0 V – 30 V PS2 classified power source according to IEC 62368-1, short-circuit current < 8 A CURRENT CONSUMPTION Operating: 160 mA @ 12 V typically / Idle: 50 mA @ 12 V typ. / Peak: 250 mA @ 12 V typ. TEMPERATURE RANGE Operating: -25 °C up to +80 °C (-13 °F up to +176 °F) Storage: -40 °C up to +85 °C (-40 °F up to +185 °F) RELATIVE HUMIDITY 5% to 95% non-condensing READ/WRITE DISTANCE LF and HF: up to 100 mm / 4 inch, depending on environment and transponder BLE: up to several meters/feet OPERATING MODES (USB) USB keyboard emulation – USB virtual COM port – CCID / PC/SC 2.01 BLUETOOTH LOW ENERGY BLE version 4.2 (upgradable) MTBF 500,000 hours WEIGHT Approx. 25 g / 0.88 oz SABOTAGE DETECTION Infrared tamper detector, front facing WIRE CONNECTOR PCB terminal block, 8 positions, push-in spring connection for wires 0.2 to 0.5 mm² / AWG 24 to 20, tool-free cable wiring DIP SWITCH 8 position DIP switch for RS-485: addressing, speed settings, line termination SIGNALING
5 RGB LEDs, each individually programmable using the on-board Intelligent Peripheral
Extension (IPE), for enhanced dynamic light concepts Acoustic loudspeaker SUPPORTED OPTIONS AND TRANSPONDERS Depending on the firmware version and installed options, ELATEC readers and modules can support a wide range of RFID technologies. Please refer to the relevant ELATEC transponder matrix (available at www.elatec-rfid.com/int/transponder-technology) for more information about the available options and RFID technologies supported by the product. OS SUPPORT Windows 7 (32-/64-bit) and higher versions, Linux, Android1), iOS1), MAC OS X1) PERIPHERAL INTERFACES Micro USB, RS-485, OSDP1), RS-232 (RX/TX), 1 SAM slot for ID-000 card format, output 5V: Wiegand D0/D1, Clock/Data TRANSMISSION SPEED USB full speed (12 Mbit/s), RS-232: up to 115,200 baud, HF Air: up to 848 kbit/s, BLE Air: up to 100 kbit/s, RS-485: up to 38,400 baud CERTIFICATION NAME TWN4 Palon Compact LEGIC M CERTIFICATIONS Non-exhaustive list2): CE/RED, FCC, IC, REACH and RoHS-III compliant ORDER CODES T4W2-B01C7 Standard reader module T4W2-B01C7-P Reader module with P option 1)On request 2)The product has been certified for use in many countries and regions. Contact your Sales representative for detailed information about all certifications and approvals granted to the product. ACCESSORIES CABLES ELATEC RFID modules can be delivered with additional cables. Refer to the data sheet Cables for ELATEC devices for detailed information.
© 2023 – ELATEC GmbH – TWN4 Palon Compact LEGIC M data sheet – DocRev04 – EN – 11/2023 Page 3 of 3 CONNECTOR ASSIGNMENT DIP ASSIGNMENT
1 RS-485 address 0 LSB
2 RS-485 address 1
3 RS-485 address 2
4 RS-485 address 3 MSB
5 RS-485 BIAS on/off
6 RS-485 speed 0
7 RS-485 speed 1
8 RS-485 termination 120 Ohm on/off
1 RS-232 RX
2 RS-232 TX
3 RS-485 A
4 RS-485 B
5 TTL Wiegand D0 or DATA
6 TTL Wiegand D1 or CLOCK
7 VIN 9 – 30 Volt
8 GND
Firmware may change the assignment of the DIP switch. Please refer to the TWN4 Palon manual. For RS-232, Wiegand, Clock/Data the DIP switch is not used. Drawing / front and side view PCB (All measures in mm) ELATEC GmbH Zeppelinstr. 1
82178 Puchheim
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Systems GmbH Schwieberdinger Str. 44
71636 Ludwigsburg
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Inc.
1995 SW Martin Hwy
Palm City • FL 34990 USA P +1 772 210 2263 F +1 772 382 3749 E-Mail: americas-info@elatec.com Website: elatec.com ELATEC Technology (Shenzhen) LLC 918, Main Building, Tian An Cyber Times Tower, No. 6, Tairan Fourth Road, Tian 'an Community, Shatou Neighborhood Futian District • Shenzhen • China P/F +86 755 2394 6014 E-Mail: apac-info@elatec.com Website: elatec.com ELATEC reserves the right to change any information or data in this document without prior notice. ELATEC declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the c ustomer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names used in this document are registered trademarks of their respective owners.