T43O-B6C0 ELATEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
© 2023 – ELATEC GmbH – TWN4 MultiTech 3 LEGIC M LF HF data sheet – DocRev03 – EN – 11/2023 Page 1 of 3 TWN4 MultiTech 3 LEGIC M LF HF Multi- frequency RFID module ( LF/HF) with NFC support TWN4 MultiTech 3 LEGIC M LF HF (exemplary illustrations*) *Product images may show product variants or additional components that are not available. The powerful reader modules of the ELATEC TWN4 MultiTech 3 family combine a compact form factor with optimized read/write performance. All devices integrate RFID (125 kHz and 13.56 MHz), NFC and, optionally, Bluetooth Low Energy (BLE) capabilities. Thanks to their reduced size, the modules can be easily used for almost all applications where small size and full performance matter. Furthermore, they are compatible with the most common host interfaces, such as USB, and they can also be configured with different connector options. TWN4 MultiTech 3 LEGIC M LF HF key features include a powerful SDK for writing apps that are executed directly on the module, the possibility to upgrade the firmware in the field and transparent data exchange with the RFID media. Additionally, the module can read more than 60 RFID technologies from low (LF) and high frequency (HF) bands, including NFC. This gives the option to select as many of the technologies required instead of being forced to select just a few ones. Special features: + Possibility to read more than 60 RFID technologies + Two RFID frequencies (125 kHz/13.56 MHz) and NFC support + Optionally available with a 24-pin header, further configurations available + Powerful SDK for writing apps which are executed directly on the module + Firmware update in the field possible + On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data + Supports transparent data exchange with RFID media + CCID and PC/SC 2.01 + Optimized read/write performance combined with a compact form factor
© 2023 – ELATEC GmbH – TWN4 MultiTech 3 LEGIC M LF HF data sheet – DocRev03 – EN – 11/2023 Page 2 of 3 TECHNICAL DATA FREQUENCIES 125 kHz (LF) / 13.56 MHz (HF) ANTENNAS Integrated DIMENSIONS (L X W X H) C0 hardware configuration: Refer to the technical drawings below for further information. POWER Micro USB (X1): 4.3 V - 5.5 V Generic interface (X2): 3.3 V (pin 19) or 4.3 V - 5.5 V (pin 13) UART (X3): 5 V PS2 classified power source according to IEC 62368-1, short-circuit current < 8 A CURRENT CONSUMPTION RF field on: 200 mA typically / Sleep: 500 µA typ. TEMPERATURE RANGE Operating: -25 °C up to +80 °C (-13 °F up to +176 °F) Storage: -40 °C up to +85 °C (-40 °F up to +185 °F) RELATIVE HUMIDITY 5% to 95% non-condensing READ/WRITE DISTANCE LF and HF: up to 100 mm / 4 inch, depending on environment and transponder OPERATING MODES (USB) USB keyboard emulation – USB virtual COM port – CCID / PC/SC 2.01 MTBF 500,000 hours WEIGHT Approx. 10 g / 0.35 oz SUPPORTED OPTIONS AND TRANSPONDERS Depending on the firmware version and installed options, ELATEC readers and modules can support a wide range of RFID technologies. Please refer to the relevant ELATEC transponder matrix (available at www.elatec-rfid.com/int/transponder-technology) for more information about the available options and RFID technologies supported by the product. OS SUPPORT Windows 7 (32-/64-bit) and higher versions, Linux, Android1), iOS1), MAC OS X1) PERIPHERAL INTERFACES
1 SAM slot (ID-000 card format)
X1: micro USB, female X2: generic interface (refer to pin assignment in technical drawings below for more information about the available interfaces) X3: UART connector header 4 pos., 1.25 mm pitch, surface mount, right-angle In the C1 and C2 hardware configurations, the reader modules are equipped with a 24- pin header (no pin header available with the C0 hardware configuration). TRANSMISSION SPEED Host: USB Full speed (12 Mbit/s), RS-232: up to 115,200 baud, HF Air: up to 848 kbit/s CERTIFICATION NAME TWN4 MultiTech 3 LEGIC M LF HF CERTIFICATIONS Non-exhaustive list2): CE/RED, FCC, IC, REACH and RoHS-III compliant ORDER CODES T43O-B6C0 Reader module in standard configuration T43O-B6C0-P Reader module with P option Order codes for C1 and C2 hardware configurations on request. 1)On request 2)The product has been certified for use in many countries and regions. Contact your Sales representative for detailed information about all certifications and approvals granted to the product. ACCESSORIES CABLES ELATEC RFID modules can be delivered with additional cables. Refer to the data sheet Cables for ELATEC devices for detailed information.
© 2023 – ELATEC GmbH – TWN4 MultiTech 3 LEGIC M LF HF data sheet – DocRev03 – EN – 11/2023 Page 3 of 3 TECHNICAL DRAWINGS All measures in mm [inch] ELATEC GmbH Zeppelinstr. 1
82178 Puchheim
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Systems GmbH Schwieberdinger Str. 44
71636 Ludwigsburg
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Inc.
1995 SW Martin Hwy
Palm City • FL 34990 USA P +1 772 210 2263 F +1 772 382 3749 E-Mail: americas-info@elatec.com Website: elatec.com ELATEC Technology (Shenzhen) LLC 918, Main Building, Tian An Cyber Times Tower, No. 6, Tairan Fourth Road, Tian 'an Community, Shatou Neighborhood Futian District • Shenzhen • China P/F +86 755 2394 6014 E-Mail: apac-info@elatec.com Website: elatec.com ELATEC reserves the right to change any information or data in this document without prior notice. ELATEC declines all responsibility for the use of this product wit h any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names used in this document are registered trademarks of their respective own ers.