T4FK-BBFRLM7 ELATEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
© 2023 – ELATEC GmbH – TWN4 USB Front Reader LEGIC data sheet – DocRev06 – EN – 11/2023 Page 1 of 3 TWN4 USB Front Reader LEGIC Multi- frequency RFID reader (LF/HF) with NFC and BLE support TWN4 USB Front Reader LEGIC (exemplary illustrations) The devices of the TWN4 USB Front Reader family are an excellent solution for any RFID-based applications that require a direct and simple connection per USB . All readers are available with an NXP or LEGIC frontend and support RFID, NFC and Bluetooth Low Energy (BLE) technologies. In addition, the patented USB connector on the rear side can be turned to 90°, which enables a quick and easy installation into any host system equipped with a USB port. Thanks to their compact form and enhanced read/write performance, the readers are particularly appropriate as a secure printing solution, but also for Single-Sign on and healthcare applications. Key features of the TWN4 USB Front Reader LEGIC include a USB hub on the front side that can be deactivated via device driver, a powerful SDK for writing apps that are executed directly on the reader and an integrated BLE module. A dditionally, the reader can read more than 60 RFID technologies from low (LF) and high frequency (HF) bands, including NFC. This gives the option to select as many of the technologies required instead of being forced to select just a few ones. Special features: + Possibility to read more than 60 RFID technologies + Two RFID frequencies (125 kHz/13.56 MHz) with NFC and BLE support + Patented USB connector on the rear side can be rotated to 90° + USB hub “pass through” on the front side can be deactivated via device driver + Powerful SDK for writing apps which are executed directly on the reader + Firmware update in the field possible + Available with custom inlay and packaging as “ready to sell from stock” + Supports transparent data exchange with RFID media + CCID and PC/SC 2.01
© 2023 – ELATEC GmbH – TWN4 USB Front Reader LEGIC data sheet – DocRev06 – EN – 11/2023 Page 2 of 3 TECHNICAL DATA FREQUENCIES 125 kHz (LF) / 13.56 MHz (HF) / 2.4 GHz (BLE) ANTENNAS Integrated HOUSING Material: ABS UL94-V0 Color: black POWER USB: 4.3 V – 5.5 V PS2 classified power source according to IEC 62368-1, short-circuit current < 8 A CURRENT CONSUMPTION RF field on: 260 mA typically + 16 mA (BLE) TEMPERATURE RANGE Operating: 0 °C up to +65 °C (+32 °F up to +149 °F) Storage: -40 °C up to +70 °C (-40 °F up to +158 °F) RELATIVE HUMIDITY 5% to 95% non-condensing READ/WRITE DISTANCE LF and HF: up to 51 mm / 2 inch, depending on environment and transponder OPERATING MODES (USB) USB keyboard emulation – USB virtual COM port – CCID / PC/SC 2.01 BLUETOOTH LOW ENERGY BLE version 4.1 (upgradable to 4.2) MTBF 500,000 hours WEIGHT Approx. 22 g / 0.78 oz SUPPORTED OPTIONS AND TRANSPONDERS Depending on the firmware version and installed options, ELATEC readers and modules can support a wide range of RFID technologies. Please refer to the relevant ELATEC transponder matrix (available at www.elatec-rfid.com/int/transponder-technology) for more information about the available options and RFID technologies supported by the product. OS SUPPORT Windows 7 (32-/64-bit) and higher versions, Linux, Android1), iOS1), MAC OS X1) PERIPHERAL INTERFACES USB (male), type A USB (female), type A
1 SAM slot for ID-000 card format
TRANSMISSION SPEED Host: USB full speed (12 Mbit/s), USB hub: USB Hi-Speed up to 40 Mbit/s, HF Air: up to 848 kbit/s, BLE Air: up to 100 kbit/s CERTIFICATION NAME TWN4 USB Front Reader LEGIC CERTIFICATIONS Non-exhaustive list2): CE/RED, REACH and RoHS-III compliant ORDER CODES T4FK-BBFRLM7 Kit including standard reader T4FK-BBFRLM7-P K it including reader with P option 1)On request 2)The product has been certified for use in many countries and regions. Contact your Sales representative for detailed information about all certifications and approvals granted to the product.
© 2023 – ELATEC GmbH – TWN4 USB Front Reader LEGIC data sheet – DocRev06 – EN – 11/2023 Page 3 of 3 TECHNICAL DRAWINGS All measures in mm [inch] ELATEC GmbH Zeppelinstr. 1
82178 Puchheim
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Systems GmbH Schwieberdinger Str. 44
71636 Ludwigsburg
E-Mail: info-rfid@elatec.com Website: elatec.com ELATEC Inc.
1995 SW Martin Hwy
Palm City • FL 34990 USA P +1 772 210 2263 F +1 772 382 3749 E-Mail: americas-info@elatec.com Website: elatec.com ELATEC Technology (Shenzhen) LLC 918, Main Building, Tian An Cyber Times Tower, No. 6, Tairan Fourth Road, Tian 'an Community, Shatou Neighborhood Futian District • Shenzhen • China P/F +86 755 2394 6014 E-Mail: apac-info@elatec.com Website: elatec.com ELATEC reserves the right to change any information or data in this document without prior notice. ELATEC declines all responsibility for the use of this product with any other specification but the one mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names used in this document are registered trademarks of their res pective owners.