STM-2016

STM-2016 STANFORD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 1 05/04/01 rev 1.0 Advanced Data Sheet The Stanford Microdevices’ STM-2016 is a high linearity active mixer for use in a wide variety of communication systems covering the 1800-2200 MHz frequency bands. This device operates from a single 5V supply and provides 9dB of conversion gain while requiring only 0dBm input to the integrated LO driver. The STM-2016 also includes an integrated on chip IF amplifier and is fabricated using sili- con germanium device technology. The STM-2016 incorporates internal matching on each RF, IF, and LO port to enhance ease of use and to reduce the number of external components required. The IF and LO ports can be driven differential or single ended. Each broadband port has been designed to minimize perfor- mance degradation while operating into highly reactive components such as SAW filters. Key Specifications Parameters Test Conditions (VCC =5.0V, I=190mA, T=25ºC) Unit Min. Typ. Max. RF Frequency Range MHz 1800 2200 IF Frequency Range MHz 10 200 300 Output IP3 IF1 = IF2 = -20 dBm/tone dBm +15 Output P1dB dBm +3.5 Conversion Gain dB 9 SSB Noise Figure dB 9 Functional Block Diagram STM-2016 1800 - 2200 MHz High Linearity Silicon Germanium Active Transmit Mixer Product Features

Applications

 Active mixer with conversion gain  No need for separate external LO driver  Low LO drive level required to drive mixer  IF and LO ports may be driven single-ended  Single supply operation (+5V)  Broadband resistive 50Ω impedances on all three ports  Digital and spread spectrum communication systems  1800-2200 MHz transceivers for base station infrastructure equipment Product Description 16 pin TSSOP with Exposed Pad Package Body: 0.20 x 0.17 x 0.04 (inches) 5.0 x 4.4 x 1.0 (mm) LOP LON VEEVEE RFP RFN VCC VEE VEE VCC IFN VCC VEE VEE VCC IFP

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 2 05/04/01 rev 1.0 Advanced Data Sheet /G54/G55/G48/G16/G21/G19/G20/G25/G3/G20/G27/G19/G19/G16/G21/G21/G19/G19/G3/G48/G43/G93/G3/G55/G85/G68/G81/G86/G80/G76/G87/G3/G48/G76/G91/G72/G85 Absolute Maximum Ratings Parameters Value Unit Supply Voltage +6.0 V DC LO Input +10 dBm RF Input +15 dBm Operating Temperature -40 to +85 ºC Storage Temperature -65 to +150 ºC Test Conditions VCC +5.0V TA +25 ºC IF Input -20 dBm @ 200 MHz LO Input 0 dBm @ 1760 MHz Product Specifications – AC Performance Parameters Additional Test Conditions Unit Min. Typ. Max. RF Frequency Range MHz 1800 2200 IF Frequency Range MHz 10 200 300 Output IP3 IF1 = IF2 = -20 dBm/tone dBm +15 Output P1dB dBm +3.5 Conversion Gain dB 9 SSB Noise figure dB 9 RF Return Loss dB 14 LO Return Loss dB 14 IF Return Loss dB 14 LO Drive dBm -3 0 +3 Product Specifications – Miscellaneous Parameters Additional Test Conditions Unit Min. Typ. Max. Supply Voltage V +4.75 +5.0 +5.25 Supply Current mA 190 Thermal Resistance ºC/W TBD Product Specifications – Isolation Performance Parameters Additional Test Conditions Unit Min. Typ. Max. Leakage (LO-RF) dBm -25 Leakage (LO-IF) dBm -30

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 3 05/04/01 rev 1.0 Advanced Data Sheet /G54/G55/G48/G16/G21/G19/G20/G25/G3/G20/G27/G19/G19/G16/G21/G21/G19/G19/G3/G48/G43/G93/G3/G55/G85/G68/G81/G86/G80/G76/G87/G3/G48/G76/G91/G72/G85 Typical Device Performance Conversion Gain VCC = 5.0V, RF = 1.96GHz, IF = 200MHz RF Frequency (GHz) Gain (dB) Return Loss at LO Input VCC = 5.0V -35 -30 -25 -20 -15 -10 LO Frequency (GHz) Return Loss (dB) Return Los s at IF Input VCC = 5.0V -50 -40 -30 -20 -10 50 100 150 200 250 300 IF Frequency (MHz) Return Loss (dB) Return Loss at RF Input VCC = 5.0V -25 -20 -15 -10 RF Frequency (GHz) Return Loss (dB) NOTE: The data shown in the graphs above demonstrates the STM-2016 performance tuned to the PCS band.

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 4 05/04/01 rev 1.0 Advanced Data Sheet /G54/G55/G48/G16/G21/G19/G20/G25/G3/G20/G27/G19/G19/G16/G21/G21/G19/G19/G3/G48/G43/G93/G3/G55/G85/G68/G81/G86/G80/G76/G87/G3/G48/G76/G91/G72/G85 Pin Out Description Pin # Function Description Additional Comments

1 VEE Ground

2 VCC Positive supply (+5V)

3 VEE Ground

4 RFN RF input, negative terminal Nominal DC voltage is 2.3V. (Internally biased) Output should be AC-coupled. 5 RFP RF input, positive terminal Nominal DC voltage is 2.3V. (Internally biased) Output should be AC-coupled.

6 VEE Ground

7 VCC Positive supply (+5V)

8 IFN IF output, negative terminal Nominal DC voltage is 2.2V. (Internally biased) Input should be AC- coupled 9 IFP IF output, positive terminal Nominal DC voltage is 2.2V. (Internally biased) Input should be AC- coupled

10 VCC Positive supply (+5V)

11 VEE Ground

12 LOP LO input, positive terminal Nominal DC voltage is 2.3V. (Internally biased) Input should be AC- coupled. 13 LON LO input, negative terminal Nominal DC voltage is 2.3V. (Internally biased) Input should be AC- coupled.

14 VEE Ground

15 VCC Positive supply (+5V)

16 VEE Ground

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 5 05/04/01 rev 1.0 Advanced Data Sheet /G54/G55/G48/G16/G21/G19/G20/G25/G3/G20/G27/G19/G19/G16/G21/G21/G19/G19/G3/G48/G43/G93/G3/G55/G85/G68/G81/G86/G80/G76/G87/G3/G48/G76/G91/G72/G85 Part Number Ordering Information Part Number Reel Size Devices/Reel STM-2016 TBD TBD Caution: ESD Sensitive Appropriate precaution in handling, packaging and testing devices must be observed. Part Symbolization The part will be symbolized with a “TBD ” marking designator on the top surface of the package. Package Dimensions (“16” Package) Test PCB Pad Layout 12°(4X) NOTE 1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS 2. TOLERANCE ±0.1 mm UNLESS OTHERWISE SPECIFIED 3. COPLANARITY : 0.1 mm 4. CONTROLLING DIMENSION IS MILLIMETER. CONVERTED INCH DIMENSIONS ARE NOT NECESSARILY EXACT. 5. FOLLOWED FROM JEDEC MO-153 −−−y θ 0° −−− 0.10−−− −−− −−− −−− 8° 0.004 MIN −−− 0.000 0.031 −−− 0.193 0.004 −−− 0.169 0.007 DIMENSIONS IN MILLIMETERS 0.00A1 D e E b C 4.90 −−− 4.30 −−− 0.80 0.09 0.19 SYMBOLS A −−− MIN −−− 0.10 1.05 5.10 −−− 0.20 4.50 −−− 0.30 5.00 4.40 0.65 6.40 −−− −−− 1.00 MAX 1.15−−− NOM 0.004−−− 0.197 0.173 0.026 0.252 0.039 −−− −−− 0.201 −−− 0.177 −−− 0.041 0.008 0.012 DIMENSIONS IN INCHES NOM −−− 0.045 MAX θ 3.0 3.00.25 1.25 6.9 0.74 0.74 0.7 0.9 0.4 φ0.33 via - Indicates metalization - vias connect pad to underlying ground plane all units are in mm

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 6 05/04/01 rev 1.0 Advanced Data Sheet /G54/G55/G48/G16/G21/G19/G20/G25/G3/G20/G27/G19/G19/G16/G21/G21/G19/G19/G3/G48/G43/G93/G3/G55/G85/G68/G81/G86/G80/G76/G87/G3/G48/G76/G91/G72/G85Demo Test Board Schematic Bill of Materials Component Designator Value Qty Vendor Part Number Description A10 1 SMDI STM-2016 SiGe Transmit Mixer A7, A8, A12 3 Johnson Components 142-0701-851 SMA connector, end launch with tab, for 62 mil pitch thick board CON 1 Digikey S1212-36-ND 2-pin header A9, A11 1:1 2 Panasonic EHF-FD1619 RF transformer A2 1:1 1 Mini-Circuits TC1-1 IF transformer Lfil 1uH 1 Digikey PCD1008CT-ND Inductor, 1210 footprint, min. 200mA rating C1, C3, C20, C21, C30 6.8pF 5 Venkel C0603COG500-6R8CNE Capacitor, 0603 footprint C7, C9 100pF 2 Venkel C0603COG500-101JNE Capacitor, 0603 footprint C4, C5 2.2pF 2 Venkel C0603COG500-2R2CNE Capacitor, 0603 footprint C11, C12 4.7pF 2 Venkel C0603COG500-4R7CNE Capacitor, 0603 footprint A10 STM-2016 LON VEEVEE RFP RFN VCC VEE VEE VCC IFN VCC VEE VEE VCC IFP LOP C9C7 VCCC3 C1 VCC A9A8 C20 VCC VCC C21 C12 C11 A11 A12 VCC CON+5V 2Lfil C30

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 7 05/04/01 rev 1.0 Advanced Data Sheet /G54/G55/G48/G16/G21/G19/G20/G25/G3/G20/G27/G19/G19/G16/G21/G21/G19/G19/G3/G48/G43/G93/G3/G55/G85/G68/G81/G86/G80/G76/G87/G3/G48/G76/G91/G72/G85 Demo Test Board (Fully Assembled PCB) Note: Dimensions in inches C30 Lfil CON1 A12 A11 A10 C7 C9 C3 C1 C20 C11 C12 C21 2.00 2.00