SRF-2016

SRF-2016 STANFORD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 1 04/23/01 rev 5.0 Advanced Data Sheet The Stanford Microdevices’ SRF-2016 is a multipurpose demodulator RFIC capable of both quadrature demodula- tion or direct IF output. This device features switchable gain control, high input P1dB, and excellent I/Q amplitude and phase balance. The SRF-2016 uses silicon germanium device technology to yield a highly integrated RFIC for use in a variety of sys- tem applications. Use of this integrated device over stan- dard discrete implementations can result in lower component count, less PCB space and higher transceiver card yields. Key Specifications Parameters Test Conditions (VCC =5.0V, I=150mA, T=25ºC) Unit Min. Typ. Max. IF/LO Frequency Range MHz 200 240 to 440 600 Conversion Gain dB -5/+15/+35 Input P1dB dBm +10/-10/-30 I/Q Output Frequency Range MHz DC 500 I/Q Output Amplitude Balance dB -0.2 0.2 I/Q Output Phase Balance deg -2 2 Functional Block Diagram SRF-2016 200 - 600 MHz Silicon Germanium IF Receiver Product Features

Applications

 Buffered IF OUT available through I axis  Gain control in 20dB steps  Excellent I/Q amplitude and phase balance  High input P1dB  Digital and spread spectrum communication systems  Cellular, PCS, DCS, 3G transceivers  ISM band transceivers  FWA receiver IF sections Product Description 16 pin TSSOP with Exposed Pad Package Body: 0.20 x 0.17 x 0.04 (inches) 5.0 x 4.4 x 1.0 (mm) LOP LON BBQPBBIN GC1 VEE BBIP INP BBQN INN 0/90VCC GC2 VCC VCC VEE VCC

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 2 04/23/01 rev 5.0 Advanced Data Sheet /G54/G53/G41/G16/G21/G19/G20/G25/G3/G54/G76/G42/G72/G3/G44/G41/G3/G53/G72/G70/G72/G76/G89/G72/G85Absolute Maximum Ratings Parameters Value Unit Supply Voltage 6.0 V DC LO Input +10 dBm IF Input +10 dBm Operating Temperature -40 to +85 ºC Storage Temperature -65 to +150 ºC Test Conditions VS = +5VDC TA = +25ºC LO Input = 0dBm, 400MHz IF Input F=400.1 MHz GC1 = 0, GC2 = 0; 0dBm GC1 = 1, GC2 = 0; -20dBm GC1 = 1, GC2 = 1; -40dBm (I/Q mixing to baseband) Parameters Test Conditions Unit Min. Typ. Max. Frequency Range MHz 200 240-440 600 Return Loss 50ohm reference dB 20 Gain gain set=high GC1=GC2=1 dB 35 Input P1dB dBm -30 Input IP3 dBm -20 Noise Figure dB 6 Gain gain set=medium GC1=1 GC2=0 dB 15 Input P1dB dBm -10 Input IP3 dBm 0 Noise Figure dB 10 Gain gain set=low GC1=GC2=0 dB -5 Input P1dB dBm 10 Input IP3 dBm 20 Noise Figure dB 30 (DC on LO Port – gain controlled amplifier) Parameters Test Conditions Unit Min. Typ. Max. Frequency Range MHz 200 600 Return Loss 50ohm reference dB 20 Gain gain set=high GC1=GC2=1 dB 40 Input P1dB dBm -26 Input IP3 dBm -16 Noise Figure dB 6 Gain gain set=medium GC1=1 GC2=0 dB 20 Input P1dB dBm -6 Input IP3 dBm 4 Noise Figure dB 9 Gain gain set=low GC1=GC2=0 dB 0 Input P1dB dBm 14 Input IP3 dBm 24 Noise Figure dB 30 Product Specifications – Miscellaneous Parameters Additional Test Conditions Unit Min. Typ. Max. Supply Voltage V +4.75 +5.0 +5.25 Supply Current mA 180 Thermal Resistance ºCT B D Product Specifications – I/Q Output Parameters Additional Test Conditions Unit Min. Typ. Max. I/Q Output Frequency Range MHz DC 500 I/Q Output Amplitude Balance dB -0.2 0.2 I/Q Output Phase Balance deg -2 2 I/Q Output Common-mode Voltage V 2.5 Product Specifications – LO Input Parameters Additional Test Conditions Unit Min. Typ. Max. LO Input Level dBm -3 0 +3 Return Loss dB 20 Product Specifications – IF Input Product Specifications – Stuck Mixer

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 3 04/23/01 rev 5.0 Advanced Data Sheet /G54/G53/G41/G16/G21/G19/G20/G25/G3/G54/G76/G42/G72/G3/G44/G41/G3/G53/G72/G70/G72/G76/G89/G72/G85 Gain vs. Pin Low Gain State (00) 0 2 4 6 8 1 01 21 4 Pin (dBm) Gain (dB) Gain vs. Pin Medium Gain State (10) Pin (dBm) Gain (dB) Gain vs. Pin High Gain State (11) Pin (dBm) Gain (dB)

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 4 04/23/01 rev 5.0 Advanced Data Sheet /G54/G53/G41/G16/G21/G19/G20/G25/G3/G54/G76/G42/G72/G3/G44/G41/G3/G53/G72/G70/G72/G76/G89/G72/G85 Pin Out Description Pin # Function Description Additional Comments

1 BBIN Baseband I-axis output (-) self-biasing

2 BBIP Baseband I-axis output (+) self-biasing

3 VCC Positive power supply

4 GC2 Gain control input, stage 2 5V CMOS levels

5 GC1 Gain control input, stage 1 5V CMOS levels

6 VEE Ground

7 VCC Positive power supply

8 INP IF input (+) self-biasing; AC-couple

9 INN IF input (-) self-biasing; AC-couple

10 VCC Positive power supply

11 VEE Ground

12 LON LO input (-) self-biasing; AC-couple

13 LOP LO input (+) self-biasing; AC-couple

14 VCC Positive power supply

15 BBQN Baseband Q-axis output (-) self-biasing

16 BBQP Baseband Q-axis output (+) self-biasing

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 5 04/23/01 rev 5.0 Advanced Data Sheet /G54/G53/G41/G16/G21/G19/G20/G25/G3/G54/G76/G42/G72/G3/G44/G41/G3/G53/G72/G70/G72/G76/G89/G72/G85 Part Number Ordering Information Part Number Reel Size Devices/Reel SRF-2016 TBD TBD Caution: ESD Sensitive Appropriate precaution in handling, packaging and testing devices must be observed. Part Symbolization The part will be symbolized with a “TBD ” marking designator on the top surface of the package. Package Dimensions Test PCB Pad Layout 12°(4X) NOTE 1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS 2. TOLERANCE ±0.1 mm UNLESS OTHERWISE SPECIFIED 3. COPLANARITY : 0.1 mm 4. CONTROLLING DIMENSION IS MILLIMETER. CONVERTED INCH DIMENSIONS ARE NOT NECESSARILY EXACT. 5. FOLLOWED FROM JEDEC MO-153 −−−y θ 0° −−− 0.10−−− −−− −−− −−− 8° 0.004 MIN −−− 0.000 0.031 −−− 0.193 0.004 −−− 0.169 0.007 DIMENSIONS IN MILLIMETERS 0.00A1 D e E b C 4.90 −−− 4.30 −−− 0.80 0.09 0.19 SYMBOLS A −−− MIN −−− 0.10 1.05 5.10 −−− 0.20 4.50 −−− 0.30 5.00 4.40 0.65 6.40 −−− −−− 1.00 MAX 1.15−−− NOM 0.004−−− 0.197 0.173 0.026 0.252 0.039 −−− −−− 0.201 −−− 0.177 −−− 0.041 0.008 0.012 DIMENSIONS IN INCHES NOM −−− 0.045 MAX θ 3.0 3.00.25 1.25 6.9 0.74 0.74 0.7 0.9 0.4 φ0.33 via - Indicates metalization - vias connect pad to underlying ground plane all units are in mm

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 6 04/23/01 rev 5.0 Advanced Data Sheet /G54/G53/G41/G16/G21/G19/G20/G25/G3/G54/G76/G42/G72/G3/G44/G41/G3/G53/G72/G70/G72/G76/G89/G72/G85 SRF2016 INN LOP BBQP BBIP VCC2 GC2 INP BBIN GC1 VEE2 VCC3 VCC4 VEE1 LON VCC1 BBQN +5V +5V +5V C21 C11 C12 C19C6 C20 L5 R7 C15 C16 C17 C18 +5V R8 R5 Demo Test Board Schematic Bill of Materials Component Designator Value Qty Vendor Part Number Description U1 1 SMDI SRF-2016 IF receiver J1 1 Digikey-Sullins S1312-02-ND 2 pin 0.1 ” power supply header J2, J3, J4, J5, J6, J7 6 Johnson Components 142-0701-851 SMA end launch connector T1, T2 2 Mini-Circuits TC1-1 Transformer C1 1uF 1 Venkel C1206Y5V160-105ZNE 1206 size supply bypass capacitor S1, S2 1 Grayhill GH1102-ND Dual DIP switch R1, R3 1 kohm 2 Venkel CR0603-16W-102JT 0603 size pull-up resistor C6, C19, C20, C21 1nF 4 Venkel C0603COG500-102JNE 0603 size bypass capacitor L1, L2, L3, L4, L5 1uH 5 Panasonic PCD1008TR-ND 1210 size inductor C7, C8, C11, C12 18pF 4 Venkel C0603COG500-180JNE 0603 size coupling capacitor R5, R6, R7, R8 0 ohm 4 Venkel CR1206-8W-000T 1206 size resistor C2, C3, C4, C5, C15, C16, C17, C18 820pF 8 Venkel C0603COG500-821JNE 0603 size filter capacitor

The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 7 04/23/01 rev 5.0 Advanced Data Sheet /G54/G53/G41/G16/G21/G19/G20/G25/G3/G54/G76/G42/G72/G3/G44/G41/G3/G53/G72/G70/G72/G76/G89/G72/G85 Demo Test Board (Fully Assembled PCB) Note: Dimensions in inches 1.96 1.96 J6 J7 J4 J5 J3U1 R7 R8 R5 R6 C7 C8 C19 C12 C11 C21 C20 L4 L1 L2L5 C18 C17 C16 C15 C5 C4 C2 C3 1 2