SLX-2043 STANFORD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 1 03/28/01 rev 8.0 Advanced Data Sheet The Stanford Microdevices’ SLX-2043 is a low noise ampli- fier module operating in the 1700 - 2500 MHz frequency band. This device has been optimized to serve high linear- ity basestation applications where a high intercept point is required with low noise figure. The SLX-2043 uses PHEMT device technology, internal bias circuitry, and proven ceramic module technology to yield a high performance product with proven reliability. Internal RF matching is also included on both the input and output to provide an easy to implement, unconditionally stable, 50 ohm circuit block. Key Specifications Symbol Parameters Test Conditions (ZO =50Ω , T=25ºC, VD =4V) Unit Min. Typ. Max. Frequency Range MHz 1700 2500 IIP3 Input Third Order Intercept Point Power out per tone = 6dBm dBm +19 OIP3 Third Order Intercept Point Power out per tone = 6dBm dBm +34 NF Noise Figure dB 1.1 1.2 S21 Small Signal Gain dB 15 P1dB Output Power @ 1dB Compression dBm 20 S11 Input VSWR — 1.8:1 S22 Output VSWR — 1.8:1 VD Device Voltage V +3.5 +4.0 +4.5 ID Device Current mA 90 105 120 R thj-c Thermal Resistance (junction-case) ºC/W 60 Noise Figure SLX-2043 1700-2500 MHz High Linearity Low Noise Amplifier Module Product Features
Applications
NF = 1.1dB IIP3 = +19dBm Gain = 15dB 50Ω input/output match Single supply operation PCS, TDMA, CDMA, WCDMA receivers Product Description 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 Frequency (GHz) dB
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 2 03/28/01 rev 8.0 Advanced Data Sheet /G54/G47/G59/G16/G21/G19/G23/G22/G3/G20/G26/G19/G19/G16/G21/G24/G19/G19/G3/G48/G43/G93/G3/G47/G49/G36/G3/G48/G82/G71/G88/G79/G72 Pin # Function Description Device Schematic 1R F I n RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the fre- quency of operation.
2 RF Out/
RF output and bias pin. Bias should be supplied to this pin through an external RF choke inductor. Because DC biasing is present on this pin, a DC blocking capacitor should be used in most appli- cations (see application schematic). The supply side of the bias network should be well bypassed. Package Backside GND Connection to ground. For best performance use via holes as shown in recommended PCB layout to reduce inductance and to provide adequate thermal path. Absolute Maximum Ratings Parameters Value Unit Supply Current 150 mA Device Voltage 5.0 V Operating Temperature -40 to +85 ºC Maximum Input Power +17 dBm Storage Temperature Range -65 to +150 ºC Operating Junction Temperature +150 ºC Operation of this device above any one of these parameters may cause permanent damage. Bias conditions should also satisfy the following expression: ID VD (max) < (TJ - TOP )/Rth, j-l RF In RF Out/ DC In C4 C3 C1 C2 VD 50 ohm microstrip 50 ohm microstrip Package Backside RF IN RF OUT SLX-2043 Reference Designators Function Value C1, C2 DC Blocking 10 pF C3 Decoupling 220 pF C4 Decoupling 0.01 uF L1 AC Blocking 47 nH Application Schematic
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 3 03/28/01 rev 8.0 Advanced Data Sheet /G54/G47/G59/G16/G21/G19/G23/G22/G3/G20/G26/G19/G19/G16/G21/G24/G19/G19/G3/G48/G43/G93/G3/G47/G49/G36/G3/G48/G82/G71/G88/G79/G72 S21, T = 25ºC -15 -10 Frequency (GHz) dB S12, T = 25ºC -50 -45 -40 -35 -30 -25 -20 -15 -10 Frequency (GHz) dB S11, T = 25ºC -30 -25 -20 -15 -10 Frequency (GHz) dB Noise Figure 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 Frequency (GHz) dB Output IP3 30.0 32.0 34.0 36.0 38.0 40.0 Frequency (GHz) dB S22, T = 25ºC -30 -25 -20 -15 -10 00 . 511 . 5 22 . 533 . 54 Frequency (GHz) dB
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 4 03/28/01 rev 8.0 Advanced Data Sheet /G54/G47/G59/G16/G21/G19/G23/G22/G3/G20/G26/G19/G19/G16/G21/G24/G19/G19/G3/G48/G43/G93/G3/G47/G49/G36/G3/G48/G82/G71/G88/G79/G72 Part Number Ordering Information Part Number Reel Size Devices/Reel SLX-2043 TBD TBD Caution: ESD Sensitive Appropriate precaution in handling, packaging and testing devices must be observed. Part Symbolization The part will be symbolized with a “TBD ” marking designator on the top surface of the package. Package Dimensions (“43” package) Test PCB Pad Layout All dimensions in mm RF Output RF Input /G54/G47/G59/G16 /G21/G19/G23/G22 0.375 Denotes Pin 1 0.6 6.9 3.45 2.43 Pin # Function 1R F I n
2 RF out/V
All plated thru holes: 0.020" dia 0.40"
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com 5 03/28/01 rev 8.0 Advanced Data Sheet /G54/G47/G59/G16/G21/G19/G23/G22/G3/G20/G26/G19/G19/G16/G21/G24/G19/G19/G3/G48/G43/G93/G3/G47/G49/G36/G3/G48/G82/G71/G88/G79/G72 Demo Test Board (Fully Assembled PCB) Bill of Materials Component Designator Value Qty Vendor Part Number Description U1 1 SMDI SLX-2043 High linearity low noise amplifier S1, S2 2 Johnson Components 142-0701-851 SMA side mount connector C1, C2 10 pF 2 Kemet C0603C100J5GAC 0603 capacitor (critical) C3 220 pF 1 Kemet C0603C221J5GAC 0603 capacitor C4 0.01 uF 1 Kemet C0603C103K5RAC 0603 capacitor C5 0.5pF 1 Kemet C0402C508C5GAC 0402 capacitor (will not be required on produc- tion modules) (critical) R1 0 Ω 1 Panasonic POOGCTND 0603 jumper J1 1 Sullins S1312-2-ND 2 pin header L1 47 nH 1 TOKO LL1608-F47NK 0603 inductor (critical) /G54/G87/G68/G81/G73/G82/G85/G71/G3/G48/G76/G70/G85/G82/G71/G72/G89/G76/G70/G72/G86/G3/G47/G49/G36 /G54/G47/G59/G66/G21 C1 C2 C3C4 R1J1 S1 S2 RF Input RF Output SLX-2043