SCA-16 STANFORD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Stanford Microdevices’ SCA-16 is a high performance Gallium Arsenide Hetrojunction Bipolar Transistor MMIC Amplifier. A Darlington configuration is utilized for broadband performance up to 3 GHz. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. Typical IP3 at 50mA is +28dBm. These unconditionally stable amplifiers provides 15dB of gain and +14.5dBm of 1dB compressed power and requires only a single positive voltage supply. Only 2 DC-blocking capaci- tors, a bias resistor and an optional inductor are needed for operation. This MMIC is an ideal choice for wireless applications such as cellular, PCS, CDPD, wireless data and SONET. SCA-16 DC-3 GHz, Cascadable GaAs HBT MMIC Amplifier Product Features High Output IP3 : +28dBm

  • Flat Gain : +/- 0.7dB Over Full Band
  • Cascadable 50 Ohm : 1.5:1 VSWR
  • Patented GaAsHBT Technology
  • Operates From Single Supply
  • Low Thermal Resistance Package

Applications

Cellular, PCS, CDPD

  • Wireless Data, SONET Sym bol Param et ers: Test Condi t i ons: I d = 50m A, Z 0 = 50 Ohm s Uni t s Mi n. Typ. M ax. G P Power Gai n f = 0.1-2.0 GHz f = 2.0-3.0 GHz dB dB 13 15 G F Gai n Fl atness Gai n Fl atness over an y 100 MHz band f = 0.1-2.0 GHz dB dB +/ - 0. 7 +/ - 0. 1 P 1dB Output Power at 1dB Compr essi on f = 0.1-2.0 GHz dBm 14.5 NF Noi se Fi g ure f = 0.1-3.0 GHz dB 5.5 VSWR Input and Output VSW R f = 0.1-3.0 GHz - 1.5 IP 3 Thi rd Order Intercept Poi nt Output T one @ 0dBm 10 MHz Apart f = 0.1-2.0 GHz dBm 28.0 T D Group Del a y f = 1.9 GHz psec 100 ISOL Reverse Isol ati on f = 0.1-3.0 GHz dB 20 VD Device Volta g e V 3.5 4.0 4.5 dG/dT Devi ce Gai n T emperatur e Coef fi ci ent dB/de g C -0.0018 dV/dT Devi ce Vol ta g e T emperature Coef fi ci ent mV/de g C- 4 . 0 The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or omissions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 1999 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com Electrical Specifications at Ta = 25C Output IP3 vs. Frequency 0 . 1 123 dBm GHz

50 Ohm Gain Blocks

|S11| vs. Frequency |S21| vs. Frequency |S12| vs. Frequency |S22| vs. Frequency Output Power vs.Frequency Typical S-Parameters Vds = 4.0V, Id = 50mA SCA-16 DC-3 GHz Cascadable MMIC Amplifier (S-Parameters include the effects of two 1.0 mil diameter bond wires, each 20 mils long, connected to the gate and drain pads on the die) 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com -20 -15 -10 0.1 1 2 3 0.1 1 2 3 -24 -20 -16 -12 0.1 1 2 3 -20 -15 -10 0.1 1 2 3 dBm dB GHz GHz dB dB GHz GHz dB GHz Freq GHz |S11| S11 Ang |S21| S21 Ang |S12| S12 Ang |S22| S22 Ang Typical Performance at 25°°°°° C (Vds = 4.0V, Ids = 50mA) 0.1 1 2 3 5-150

SCA-16 DC-3 GHz Cascadable MMIC Amplifier Absolute Maximum Ratings Parameter Absol ut e Maxi mum Device Current 75mA Power Di s si pat i on 350mW R F Input P ow er 100m W Junction T emperature +200C Operating T emperature -45C to +85C Storage T emperatur e -65C to +150C Notes: 1. Operation of this device above any one of these parameters may cause permanent damage. MTTF vs. Temperature @ Id = 50mA Thermal Resistance (Lead-Junction): 510° C/W 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC http://www.stanfordmicro.com Typical Biasing Configuration Temperature MTTF (hrs) +55C 1,000,000 +90C 100,000 +120C 10,000 Outline Drawing Pin Designation 1R F i n 2G N D

3 RF out and Bias

The data shown was taken on a 31mil thick FR-4 board with 1 ounce of copper on both sides. The board was mounted to a baseplate with 3 screws as shown. The screws bring the top side copper temperature to the same value as the baseplate. 1. Use 1 or 2 ounce copper, if possible. 2. Solder the copper pad on the backside of the device package to the ground plane. 3. Use a large ground pad area with many plated through-holes as shown. 4. If possible, use at least one screw no more than 0.2 inch from the device package to provide a low thermal resistance path to the baseplate of the package. 5. Thermal resistance from ground lead to screws is 2 deg. C/W. Recommended Bias Resistor Values Supply Voltage (Vs) 5V 7.5V 9V 12V 15V 20V Rbias (Ohms) 20 70 100 160 220 320 5-151 SCA-16