SBB5089Z QORVO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 1 of 11 www.qorvo.com

3 Pin SOT-89 Package

  • 50 MHz – 6000 MHz
  • ±1.1 dB Wideband Flat Gain up to 4000 MHz
  • +20.4 dBm P1dB at 1950 MHz
  • +5 V Single Fixed Supply
  • 1000V, HBM Class 1C Robust ESD
  • Patented Thermal Design and Bias Circuitry
  • Low Thermal Resistance Product Overview The SBB5089Z is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias circuitry. The active bias circuitry provides stable current over temperature and process variation s. The SBB5089Z designed to run directly from a 5V supply, does not require a dropping resistor as compa red to typical Darlington amplifiers. The SBB5089Z is a high linearity gain block for applications that require small in size with minimal number of external components. It is internally matched to 50 Ω at input and output.

Ordering Information

Part No. Description SBB5089Z 1,000 pieces on a 7” reel (standard) SBB5089Z PCK1 500 – 3500 MHz Evaluation Board with a 5-piece sample bag Functional Block Diagram Top View

Applications

  • PA Driver Amplifier
  • Cellular, PCS, GSM, UMTS
  • Wideband Instrumentation
  • Wireless Data, Satellite Terminals

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 2 of 11 www.qorvo.com Recommended Operating Conditions Parameter Min Typ Max Units Device Voltage (VC) +4.75 +5 +5.25 V TCASE −55 +105 °C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Absolute Maximum Ratings Parameter Rating Storage Temperature −55 to +150 °C RF Input Power, CW, 50 Ω, T=25 °C +24 dBm Device Voltage (VC) +5.5 V Device Current (IC) 100 mA Dissipated Power (PDISS) 0.55 W Junction Temperature (TJ) +150 °C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Parameter Conditions (1) Min Typ Max Units Operational Frequency Range 50 6000 MHz Gain, Small Signal 850 MHz 19.0 20.5 22.0 dB 1950 MHz 18.3 19.0 21.5 dB 6000 MHz 14.5 15.5 17.5 dB Input Return Loss 1950 MHz 10 13 dB Output Return Loss 10 14 dB Output P1dB 850 MHz 20.5 dBm 1950 MHz 19.0 20.0 dBm Output IP3 (2) 850 MHz 38.5 dBm 1950 MHz 33.0 35.0 dBm Bandwidth Minimum 10 dB typical return loss 3000 MHz Reverse Isolation 1950 MHz 23.3 dB Noise Figure 3.9 4.9 dB Device Operating Current, IC Pin 3 60 75 92 mA Thermal Resistance, θjc Junction to case 69.9 °C/W Notes: 1. Test conditions unless otherwise noted: VC = +5.0 V, IC = 75 mA, Temp = +25 °C, 50 Ω test system, Tested with Bias Tees 2. POUT = 0 dBm/tone, ∆f = 1 MHz

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 3 of 11 www.qorvo.com Typical Performance – SBB5089ZPCK1 Parameter (1) Typical Value Units Frequency 50 100 200 500 850 1950 2500 3500 4000 MHz Notes: 1. Test conditions unless otherwise noted: VCC = +5V, IC = 75 mA , 50 Ω test system, Temp.=+25 °C 2. Pout= 0 dBm/tone, Δf=1 MHz 500 – 3500 MHz Evaluation Board – SBB5089ZPCK1 Bill of Material – SBB5089ZPCK1 Reference Des. Value Description Manuf. Part Number PCB - Printed Circuit Board Qorvo Q1 - SBB5089Z Amplifier, SOT-89 pkg. Qorvo SBB5089Z C1 1 μF CAP, 1 μF, 20%, 20V, TANT, 1206 various C2 1200 pF CAP, 1200 pF, 10%, 50V, X7R, 0603 various CB 68 pF CAP, 68 pF, 5%, 50V. NPO/C0G, 0603 various LC 82 nH IND, 82 nH, 5%, W/W, 0805 Coilcraft 0805CS-330XJLB Note for < 500 MHz: CB 1.0 μF, 10%, 160, X7R, 0603; LC 330 nH, 5%, 0805

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 4 of 11 www.qorvo.com Performance Plots – SBB5089ZPCK1 Test conditions unless otherwise noted: VCC = +5V, IC = 75 mA, 50 Ω test system, Temp.=+25 °C

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 5 of 11 www.qorvo.com Performance Plots – SBB5089ZPCK1 (continued) Test conditions unless otherwise noted: VCC = +5V, IC = 75 mA, 50 Ω test system, Temp.=+25 °C

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 6 of 11 www.qorvo.com Performance Plots – with BIAS Tees Test conditions unless otherwise noted: VC = +5V, IC = 75 mA, 50 Ω test system, Temp.=+25 °C, with BIAS Tees

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 7 of 11 www.qorvo.com Pad Configuration and Description Top View Pad No. Label Description 1 RF IN RF input. External DC Block capacitor required. 3 RF OUT / BIAS RF output and DC Supply input. External DC Block capacitor and bias voltage required. 2, 4 Backside Paddle GND RF/DC ground. Use recommended via hole pattern to minimize inductance and thermal resistance. See PCB Mounting Pattern for suggested footprint.

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 8 of 11 www.qorvo.com Package Marking and Dimensions Marking: Part Number – SBB5089Z Trace Code – Assigned by sub-contractor Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012. PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Use 1 oz. copper minimum for top and bottom layer metal. 3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.01”). 4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 9 of 11 www.qorvo.com Tape and Reel Information – Carrier and Cover Tape Dimensions Feature Measure Symbol Size (in) Size (mm) Cavity Length A0 0.181 4.60 Width B0 0.193 4.90 Depth K0 0.075 1.90 Pitch P1 0.315 8.00 Centerline Distance Cavity to Perforation - Length Direction P2 0.079 2.00 Cavity to Perforation - Width Direction F 0.217 5.50 Cover Tape Width C 0.362 9.20 Carrier Tape Width W 0.472 12.0

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 10 of 11 www.qorvo.com Tape and Reel Information – Tape Length and Label Placement Notes: 1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481-1-A. 2. Labels are placed on the flange opposite the sprockets in the carrier tape. Tape and Reel Information – Reel Dimensions Standard T/R size = 1,000 pieces on a 7” reel. Feature Measure Symbol Size (in) Size (mm) Flange Diameter A 6.969 177.0 Thickness W2 0.717 18.2 Space Between Flange W1 0.504 12.8 Hub Outer Diameter N 2.283 58.0 Arbor Hole Diameter C 0.512 13.0 Key Slit Width B 0.079 2.0 Key Slit Diameter D 0.787 20.0

50MHz-6000MHz, Cascadable Amplifier Datasheet, June 1, 2021 | Subject to change without notice 11 of 11 www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) Class 1C ESDA / JEDEC JS-001-2012 MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Solderability Solder profiles available upon request. Contact plating: NiPdAu RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes:

  • Lead Free
  • Halogen Free (Chlorine, Bromine)
  • Antimony Free
  • TBBP-A (C15H12Br402) Free
  • PFOS Free
  • SVHC Free Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2021 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Pb