S10040220P QORVO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

CATV Push Pull Hybrid 1000MHz 22dB Data Sheet Rev. D, October 10, 2018 | Subject to change without notice 1 of 4 www.qorvo.com Product Description The S10040220P is a Hybrid Push Pull amplifier module. The part employs GaAs/GaN die and is operated from 40 MHz to 1000 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability. Package: SOT-115J Product Features ▪ Excellent Linearity ▪ Superior Return Loss Performance ▪ Extremely Low Distortion ▪ Optimal Reliability ▪ Extremely Low Noise ▪ Unconditionally Stable Under all Terminations ▪ 22.0 dB Min Gain at 1000 MHz ▪ 270 mA Max. at 24 VDC

Applications

  • 40 – 1000 MHz CATV Amplifier Systems Functional Block Diagram

Ordering Information

Part No. Description S10040220P Box with 50 pcs INPUT OUTPUT S10040220P

Data Sheet Rev. D, October 10, 2018 | Subject to change without notice 2 of 4 www.qorvo.com Parameter Value / Range RF Input Voltage (single tone) 75 dBmV DC Supply over-voltage (5 minutes) +30 V Storage Temperature −40 to 100 °C Operating Mounting Base Temperature −30 to 100 °C Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications Parameter Test Conditions: V+=24V, TMB=30°C, ZS=ZL=75 Min Typ Max Unit Operational Frequency Range – 40 – 1000 MHz Gain fo = 50 MHz 21.0 21.5 22.0 dB Gain fo = 1000 MHz 22.0 23.5 Gain Slope 40 to 1000 MHz [1] 0.5 2.0 Gain Flatness 40 to 1000 MHz ±0.4 Input Return Loss fo= 40 to 160 MHz 20.0 – dB fo= 160 to 1000 MHz 18.0 – Output Return Loss fo= 40 to 160 MHz 20.0 – dB fo= 160 to 870 MHz 18.0 – fo= 870 to 1000 MHz 15.0 Noise Figure fo= 50 to 1000 MHz – 2.5 3.5 dB IDC 260 270 mA CTB 132 analog channels, NTSC frequency raster: 55.25 MHz to 865.25 MHz, +40dBmV flat output level.[2] -66 -64 dBc XMOD -59 -57 dBc CSO -66 -64 dBc 1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. Composite Triple Beat (CTB) - The CTB parameter is defined by ANSI/SCTE 6. Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by ANSI/SCTE 6. Cross Modulation (XMOD) - Cross modulation (XMOD) is defined by ANSI/SCTE 58, measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested.

Data Sheet Rev. D, October 10, 2018 | Subject to change without notice 3 of 4 www.qorvo.com Package Drawing (Dimensions in millimeters) 123 5 7 89 R O Q M 5 10mm0 scale B N L F A D H øG T S PJ U I E C K European Projection Nominal Min Max A 44,6 ± 0,2 44,4 44,8 B 13,6 ± 0,2 13,4 13,8 C 20,4 ± 0,5 19,9 20,9 D 8 ± 0,15 7,85 8,15 E 12,6 ± 0,15 12,45 12,75 F 38,1 ± 0,2 37,9 38,3 H 4 ± 0,2 3,8 4,2 I 25,4 ± 0,2 25,2 25,6 J UNC 6-32 - - L 27,2 ± 0,2 27,0 27,4 M 11,6 ± 0,5 11,1 12,1 O 0,25 ± 0,02 0,23 0,27 P 0,45 ± 0,03 0,42 0,48 Q 2,54 ± 0,3 2,24 2,84 R 2,54 ± 0,5 2,04 3,04 S 2,54 ± 0,25 2,29 2,79 T 5,08 ± 0,25 4,83 5,33 U 5,08 ± 0,25 4,83 5,33 Pin Name

1 Input

9 Output

Pinning: Notes:

Data Sheet Rev. D, October 10, 2018 | Subject to change without notice 4 of 4 www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) 1B JEDEC JS-001 ESD – Charged Device Model (CDM) C3 JEDEC JS-002 RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive 2015/863/EU. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should ob tain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intel lectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRAN TIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.