RMC1/16SK3600FTH

QPB7425 QORVO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 24

Technical content

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 1 of 24 - www.qorvo.com 3-pin SOT-89 Package Key Features

• 47 MHz to 1218 MHz Operation
• 3 V, 5 V, or 8 V supply
• Gain; 25 dB Typical
• Noise Figure; 0.9 dB Typical at 850 MHz
• Adjustable Bias Using External Resistors
• Convenient SOT-89 Package
• RoHS Compliant

Ordering Information

QPB7425SQ Sample bag with 25 pieces QPB7425SR 7" Reel with 100 pieces QPB7425TR13 13" Reel with 2500 pieces QPB7425PCK 47 – 1218 MHz PCBA with 5 pc sample bag

Applications

• FTTH GPON and GEPON
• DOCSIS 3.1
• Head End CMTS Equipment
• Optical Nodes
• FDx Return Path
• Satellite Low Noise Amplifier
• Cable Modem and Set Top Box
• 50ohm LNA Product Overview The QPB7425 is a GaAs pHEMT single ended RF amplifier IC featuring 25 dB of flat gain and low noise. This IC is designed to support Fiber to The Home (FTTH) applications from 47 to 1218 MHz using a single 8 V supply. Operation down to 3 V is possible for applications with reduced linearity requirements. QPB7425 offers extremely low noise and distortion plus high gain in a SOT-89 package for convenient layout and design in set top and infrastructure projects for 75 Ω CATV and satellite applications. Functional Block Diagram Top View

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 2 of 24 - www.qorvo.com Electrical Specifications – 3V Parameter Condition (1) Min Typ Max Unit Supply Voltage (VDD) 3 V Supply Current (IDD) 40 mA Frequency Range 47 1218 MHz Gain 24 dB Gain Slope 0.5 dB Reverse Isolation 26 dB Input Return Loss 17 dB Output Return Loss 16 dB Noise Figure 1.2 dB CSO 21 dBmV / ch output, 80 NTSC + 108 QAM, flat 51 dBc CTB 21 dBmV / ch output, 80 NTSC + 108 QAM, flat 73 dBc CCN 21 dBmV / ch output, 80 NTSC + 108 QAM, flat 50 dB OIP2L 7 dBm / tone output 36 dBm OIP2H 7 dBm / tone output 37 dBm OIP3 7 dBm / tone output 27 dBm OP1dB 15.4 dBm Thermal Resistance ΘJC 35 ˚C/W Notes: 1. Typical performance at these conditions: Temp = +25 °C, VDD = +8 V, 75 Ω system, Full band unless otherwise noted Absolute Maximum Ratings Parameter Rating Supply Voltage (VDD) +10 V Supply Current (IDD) 140 mA Maximum Input Level 65 dBmV Operating Temperature Range -40 to +85 °C Storage Temperature Range −65 to +150 °C Maximum Junction Temperature +150 °C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability.

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 3 of 24 - www.qorvo.com Electrical Specifications – 5V Parameter Condition (1) Min Typ Max Unit Supply Voltage (VDD) 5 V Supply Current (IDD) 55 mA Frequency Range 47 1218 MHz Gain 25 dB Gain Slope 0.5 dB Reverse Isolation 26.4 dB Input Return Loss 20 dB Output Return Loss 17 dB Noise Figure 1.1 dB CSO 21 dBmV / ch output, 80 NTSC + 108 QAM, flat 59 dBc CTB 21 dBmV / ch output, 80 NTSC + 108 QAM, flat 75 dBc CCN 21 dBmV / ch output, 80 NTSC + 108 QAM, flat 52 dB OIP2L 7 dBm / tone output 44 dBm OIP2H 7 dBm / tone output 41 dBm OIP3 7 dBm / tone output 37 dBm OP1dB 20.6 dBm Thermal Resistance ΘJC 35 ˚C/W Notes: 1. Typical performance at these conditions: Temp = +25 °C, VDD = +5 V, 75 Ω system, Full band unless otherwise noted

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 4 of 24 - www.qorvo.com Electrical Specifications – 8V Parameter Condition (1) Min Typ Max Unit Supply Voltage (VDD) 8 V Supply Current (IDD) 105 mA Frequency Range 47 1218 MHz Gain 25 dB Gain Slope -0.5 dB Reverse Isolation 27 dB Input Return Loss 19 dB Output Return Loss 16 dB Noise Figure 1.1 dB CSO 29 dBmV / ch output, 80 NTSC + 108 QAM, flat 57 dBc CTB 29 dBmV / ch output, 80 NTSC + 108 QAM, flat 80 dBc CCN 29 dBmV / ch output, 80 NTSC + 108 QAM, flat 56 dB OIP2L 7 dBm / tone output 50 dBm OIP2H 7 dBm / tone output 45 dBm OIP3 7 dBm / tone output 39 dBm OP1dB 24.7 dBm Thermal Resistance ΘJC 35 ˚C/W Notes: 1. Typical performance at these conditions: Temp = +25 °C, VDD = +8 V, 75 Ω system, Full band unless otherwise noted

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 5 of 24 - www.qorvo.com Evaluation Board Schematic (47 – 1218 MHz)

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 6 of 24 - www.qorvo.com Evaluation Board Bill of Materials Designator Description Manufacturer Part Number PCB QPB7420-4000 DDI QPB7420-4000(A) U1 25dB FTTH Amplifier Qorvo QPB7425SB B1, B2 FER, BEAD, 1.8K, 200mA, 0402 TDK MMZ1005A182ET000 C1, C2, C5 CAP, 10000pF, 10%, 50V, X7R, 0402 Murata Electronics GRM155R71H103KA88D C3 CAP, 1.2pF, +/-0.1pF, 50V, C0G, 0402 Murata Electronics GRM1555C1H1R2BA01D C4 CAP, 0.3pF, +/-0.05pF, 50V, C0G, 0402 Murata Electronics GRM1555C1HR30WA01D C6 CAP, 330pF, 5%, 50V, C0G, 0402 Murata Electronics GRM1555C1H331JA01D R1 RES, 1.5 K Ω, 1%, 1/16W, 0402 Panasonic Industrial ERJ-2RKF1501X R2 RES, 360 Ω, 1%, 1/10W, 0402 Kamaya, Inc RMC1/16SK3600FTH R3 RES, 1M, 5%, 1/16W, 0402 Kamaya, Inc RMC1/16S-105JTH R5 RES, 0 Ω, 5%, 1/10W, 0402 Kamaya, Inc RMC1/16SJPTH L1 IND, 8.2nH, 2%, 550mA, M/L, 0402 Murata Electronics LQG15HS8N2G02D L2 IND, 5.6nH, ±0.1nH, 650mA, M/L, 0402 Murata Electronics LQG15HS5N6B02D L3 IND, 68nH, 2%, 250mA, M/L, 0402 Murata Electronics LQG15HS68NG02D J1, J2 CONN, F FEM EDGE MOUNT, 75 Ω, 0.068" Millimeter Wave MW-846-C-DD-75 J3, J4 TERM. SOLDER TURRET. .062 PCB Mill-Max Mfg 2533-0-00-44-00-00-07-0 R4, C7 Not Populated N/A N/A

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 7 of 24 - www.qorvo.com Evaluation Board Assembly Drawing

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 8 of 24 - www.qorvo.com Typical Application Schematic (47 – 1218 MHz) Notes: 1. C3/L1 tunes input return loss. 2. L2/C4 tunes output return loss with some contribution from C6. 3. R1/L3 sets the level of feedback while B1, B2 provides the bias path with RF isolation from the RF output path. 4. R2 helps control high end tilt/peaking. 5. R3 can be removed for improvement to noise figure and return loss with slight degradation to linearity.

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 9 of 24 - www.qorvo.com Performance Data – 8V Notes: (1) OIP3: 7 dBm / tone output

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 10 of 24 - www.qorvo.com Performance Data – 8V Notes: (1) OIP2: 7 dBm / tone output (2) CSO/CTB, CCN: 29 dBmV / ch output, 80 NTSC + 108 QAM, flat (3) MER: 190 QAM256 Channels, 57-1215MHz, ITU-T J.83, Annex B

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 11 of 24 - www.qorvo.com Performance Data – 8V Notes: (1) 1Meg Pullup installed in R3, 0 Ω installed in R5. Refer to Evaluation Board Schematic on Pg 5.

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 12 of 24 - www.qorvo.com Performance Data vs Supply Voltage Notes: (1) OIP3: 7 dBm / tone output

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 13 of 24 - www.qorvo.com Performance Data vs Supply Voltage Notes: (1) OIP2: 7 dBm / tone output (2) CSO/CTB, CCN: 21 dBmV / ch output, 80 NTSC + 108 QAM, flat

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 14 of 24 - www.qorvo.com Performance Data vs Supply Voltage Notes: (1) CSO/CTB, CCN: 29 dBmV / ch output, 80 NTSC + 108 QAM, flat (2) MER: 190 QAM256 Channels, 57-1215MHz, ITU-T J.83, Annex B

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 15 of 24 - www.qorvo.com Additional Applications FDx Return Path Schematic (5 – 700MHz) Notes: 1. C3/L1 tunes input return loss. 2. L2/C4 tunes output return loss with some contribution from C6. 3. R1/L3 sets the level of feedback while B1, L4 provides the bias path with RF isolation from the RF output path. 4. R2 helps control high end tilt/peaking.

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 16 of 24 - www.qorvo.com Performance Data (5-700MHz) Notes: (1) 25C, 75ohm test system. (2) OIP2, OIP3 tested with 5dBm per output tone

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 17 of 24 - www.qorvo.com Performance Data (5-700MHz) Notes: (1) 25C, 75ohm test system. (2) NPR waveform 5-85MHz; 13 6MHz QAM channels, middle channel inactive. 0 200 400 600 800 1000 1200 OP1dB (dBm) Frequency (MHz) Output P1dB 0.0 0.5 1.0 1.5 2.0 0 200 400 600 800 1000 1200 Noise Figure (dB) Frequency (MHz) Noise Figure

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 18 of 24 - www.qorvo.com 50ohm LNA Schematic (1.0 - 1.6GHz) Notes: 1. C3/L1 tunes input return loss. 2. L2/C4 tunes output return loss with some contribution from C6. 3. R1/L3 sets the level of feedback while B1, B2 provides the bias path with RF isolation from the RF output path. 4. R2 helps control high end tilt/peaking. 5. R3 or R4 can be added to adjust IDD if needed (refer to Table 1 below). 6. Nominal current without pullup/pulldown is 31mA for 2.8V, 57mA for 5V. IDD VDD 30mA 40mA 50mA 65mA 80mA 95mA 110mA 2.8V ∞ R3 = 475K R3 = 221K x x x x 5V x x R4 = 205K R3 = 887K R3 = 365K R3 = 237K R3 = 169K Table 1: R3/R4 vs IDD

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 19 of 24 - www.qorvo.com Performance Data (1.0 – 1.6GHz, 50ohms) Notes: (1) 25C, 50ohm test system.

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 20 of 24 - www.qorvo.com Performance Data (1.0 – 1.6GHz, 50ohms) Notes: (1) 25C, 50ohm test system.

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 21 of 24 - www.qorvo.com Pin Configuration and Description Top View Pin No. Label Description

1 RF IN RF Input, DC blocking capacitor required

2 GND Internally Not Connected

3 RF OUT / VDD RF Output – VDD bias choke required

Backside Paddle GND Ground. Use recommended via pattern to minimize inductance and thermal resistance. See PCB Mounting Pattern for suggested footprint.

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 22 of 24 - www.qorvo.com Package Outline Notes: 1. Dimensions in millimeters

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 23 of 24 - www.qorvo.com Notes: 1. Ground/thermal vias are critical for the proper performance of this device. Vias should use a .35 mm (#80 /.0135’) diameter drill and have a final, plated thru diameter of 0.25 mm (0.010”). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. RF trace width depends upon the PC board material and construction. 4. All dimensions are in millimeters (inches). Angles are in degrees. Package Marking Recommended Mounting Pattern

75 Ω 25 dB CATV Amplifier (47 – 1218 MHz) Data Sheet –Rev C, November 5, 2018 | Subject to change without notice - 24 of 24 - www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) 1B (500V) ESDA / JEDEC JS-001-2012 ESD – Charged Device Model (CDM) C1 (1000V) JEDEC JESD22-C101F MSL – Moisture Sensitivity Level MSL1 IPC/JEDEC J-STD-020 Solderability Solder profiles available upon request. Contact plating: Matte Sn RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive. This product also has the following attributes:

• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• PFOS Free
• SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Tel: 1-844-890-8163 Web: www.qorvo.com Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Pb