DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
■ Insertion Loss = ■ 0.3 dB typical at 900MHz ■ 0.4 dB typical at 2.5GHz ■ 0.75 dB typical at 5GHz ■ Isolation = 27dB ■ P0.1dB > 27dBm ■ Switch Control Logic > 1.2V ■ High ESD 2kV HBM
Applications
■ Wireless Routers ■ Access Points ■ Residential Gateways ■ Consumer Premise Equipment ■ Small Cell ■ Internet of Things RFSW8008
2 of 7 Disclaimer: Subject to change without notice Revision DS20180308 RFSW8008 RFMD + TriQuint = Qorvo Absolute Maximum Ratings Parameter Rating Unit Supply Voltage 5.0 V Storage Temperature -40 to +150 ºC Moisture Sensitivity MSL1 Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max Compliance Operating Frequency 0.3 5.925 GHz Operating Temperature -40 +85 ºC Power Supply VDD 2.7 5 V Control Voltage-High 1.2 1.8 VDD V CTRL Control Voltage-Low 0 0.2 V 300-1000MHz VDD=3.6V, T=+25ºC; Unless otherwise noted Insertion Loss 0.3 0.5 dB P0.1dB 29 dBm Input Return Loss 20 15 dB Output Return Loss 20 15 dB RF1-ANT in RF2 Isolation 24 dB RF2-ANT in RF1 Isolation 24 dB 1000-2500MHz VDD=3.6V, T=+25ºC; Unless otherwise noted Insertion Loss 0.4 0.8 dB Linear Output Power 21 dBm 11ac 40MHz Dynamic EVM -45 -40 dB 0.6 1 % Input Return Loss 20 15 dB Output Return Loss 20 15 dB RF1-ANT in RF2 Isolation 24 dB RF2-ANT in RF1 Isolation 24 dB
3 of 7 Disclaimer: Subject to change without notice Revision DS20180308 RFSW8008 RFMD + TriQuint = Qorvo Parameter Specification Unit Condition Min Typ Max 5000-6000MHz VDD=3.6V, T=+25ºC; Unless otherwise noted Insertion Loss 0.8 1.5 dB Linear Output Power 21 dBm 11ac 80MHz Dynamic EVM -45 -40 dB 0.6 1 % Output Return Loss 15 10 dB RF1-ANT in RF2 Isolation 20 dB RF2-ANT in RF1 Isolation 20 dB General Specifications Passband Ripple -0.1 0.1 dB Across any 100MHz BW Input P0.1dB 27 29 dBm CW Switch Control Current 25 nA Total Operating Current: High State 60 150 μA Total Operating Current: Low State 1.5 μA Switch Time - 50 to 90% RF Output 200 500 nS VCONTROL=0 to 3.3V, CTRL = High Switch Time - 50 to 10% RF Output 200 500 nS ESD – Human Body Model 2000 V Switch Control Logic Truth Table Operating Mode VCTRL1 VCNTRL2 RF1-ANT High High RF2-ANT High Low Shutdown Low Low Note: High > 1.2V to VDD. Low = 0V to 0.2V.
4 of 7 Disclaimer: Subject to change without notice Revision DS20180308 RFSW8008 RFMD + TriQuint = Qorvo Applications Schematic Frequency C1 C2 C3 C6 C7 C8-10 <2500MHz 82pF 220pF 100pF 100pF 100pF DNI >5000MHz 82pF 220pF 10pF 10pF 10pF DNI
5 of 7 Disclaimer: Subject to change without notice Revision DS20180308 RFSW8008 RFMD + TriQuint = Qorvo PCB Patterns
6 of 7 Disclaimer: Subject to change without notice Revision DS20180308 RFSW8008 RFMD + TriQuint = Qorvo Package Outline (Dimensions in millimeters)
7 of 7 Disclaimer: Subject to change without notice Revision DS20180308 RFSW8008 RFMD + TriQuint = Qorvo Pin Out
1 RF2
Pin Names and Descriptions Pin Name Description
1 VCTRL2 Control voltage to enable RF2 port (RF2-ANT)
2 ANT Antenna or common RF Port. External DC blocking required 3 VDD Drain voltage supply. 4 RF1 RF Port 1. External DC blocking required 5 GND Ground connection. 6 RF2 RF Port 2. External DC blocking required