RFSW6222 PCBA-410

RFSW6222 QORVO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Classification | PRIVATE RFSW6222 50MHz to 3700MHz DPDT Switch Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 1 of 10 www.qorvo.com 12-Pin, 2 x 2 mm QFN Package Key Features

• 50 – 3700 MHz Operation
• Low Insertion Loss: 0.29dB at 2700MHz Typical
• High Port-to-Port Isolation: 29dB at 2700MHz Typical
• Power Handling ≤ +35dBm
• Very Low Current Consumption
• 1.3V to 2.7V GPIO Compatible Product Overview The RFSW6222 is a Dual-Pole Double-Throw (DPDT) switch designed for general purpose switching applications. The low insertion loss along with excellent linearity performance makes the RFSW6222 ideal for filter or amplifier bypass switching. The operational supply voltage is from 2.4V to 3.5V. And the control logic is compatible with 1.3V and 2.7V systems. The standard 12-pin QFN package in 2.0mm x 2.0mm size is a compact, easy-to-use, switch component for quick integration into multi-mode, multi-band systems.

Ordering Information

Part No. Description RFSW6222TR7 2,500 pieces on a 7” reel RFSW6222 PCBA-410 50 MHz – 3700MHz Evaluation Board Functional Block Diagram Top View

Applications

• Filter Switching
• LNA Bypass Switching
• Antenna Switching
• Dual Single-Ended Configuration
• Differential Pair Configuration

Classification | PRIVATE RFSW6222

50 MHz to 3700 MHz Differential or Dual SPDT Switch

Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 2 of 10 www.qorvo.com Recommended Operating Conditions Parameter Min Typ Max Units Device Voltage (VDD) +2.4 +2.8 +3.5 V TCASE −30 +25 +90 °C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Absolute Maximum Ratings Parameter Rating Storage Temperature −65 to +150 °C RF Input Power, Momentary Infrequent 50 Ω Load +38 dBm 6:1 VSWR +36dBm RF Input Power, Continuous 50 Ω Load +36 dBm 6:1 VSWR +35dBm DC Supply Voltage (VDD) +3.9 V Control Voltage to Digital Input (CB1) +3.0 V Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Parameter Conditions (1) Min Typ Max Units Operational Frequency Range 50 2700 MHz Insertion Loss (2) (RFx to RFxA/RFxB) 700 MHz to 960 MHz 0.26 0.40 dB 961 MHz to 1710 MHz 0.26 0.45 dB 1711 MHz to 2170 MHz 0.27 0.45 dB 2171 MHz to 2700 MHz 0.29 050 dB Isolation (RF1 to RF1A/RF1B)

700 MHz to 960 MHz 31 40 dB

961 MHz to 1710 MHz 25 36 dB

1711 MHz to 2170 MHz 25 30 dB

2171 MHz to 2700 MHz 25 30 dB

(RF2 to RF2A/RF2B)

961 MHz to 1710 MHz 25 35 dB

1711 MHz to 2170 MHz 25 32 dB

2171 MHz to 2700 MHz 25 29 dB

Phase Balance ± 5 ° IP3 700 MHz to 2700MHz, +35dBm 70 dBm Harmonics 2 x f0 f0 787 MHz, Pin 26 dBm -79 dBc 3 x f0 f0 710 MHz, Pin 26 dBm -84 dBc 2 x f0 f0 915 MHz, Pin 26 dBm -107 -84 dBc 3 x f0 -106 -84 dBc 2 x f0 f0 915 MHz, Pin 35 dBm -103 -76 dBc 3 x f0 -90 -76 dBc 2 x f0 f0 1980 MHz, Pin 26 dBm -105 -86 dBc 3 x f0 -105 -86 dBc 2 x f0 f0 1980 MHz, Pin 32 dBm -99 -76 dBc 3 x f0 -94 -76 dBc 2 x f0 f0 2570 MHz, Pin 26 dBm -108 -86 dBc 3 x f0 -109 -86 dBc 2 x f0 f0 2690 MHz, Pin 26 dBm -109 -86 dBc 3 x f0 -105 -86 dBc

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 3 of 10 www.qorvo.com Electrical Specifications (Continued) Parameter Conditions (1) Min Typ Max Units VSWR 700 MHz to 2700 MHz 1.1:1 1.3:1 Ratio Device Current, IVDD 90 110 μA Control Current, ICB1 1 μA Control Voltage High, VCB1 1.3 1.8 2.7 V Control Voltage Low, VCB1 0 0.45 V Switching Time 50% control to 10/90% RF 5 μs Notes: 1. Test conditions unless otherwise noted: VDD = +2.8V, VCB1 High/Low = +1.8V / 0 V, Temp = +25 °C, Single-ended 50 Ω system, 2. PCB trace loss deducted Truth Table – Control Logic Control Input Mode of Signal Path CB1 Switch RF1 Switch RF2

0 RF1 ⇆ RF1A RF2 ⇆ RF2A

1 RF1 ⇆ RF1B RF2 ⇆ RF2B

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 4 of 10 www.qorvo.com

50 MHz to 2700 MHz Evaluation Board

Evaluation Board Bill of Material – RFSW6222PCBA-410 Reference Des. Value Description Manuf. Part Number - - Printed Circuit Board Qorvo RFSW6222-410(A) U1 - MOD, General Purpose DPDT RF switch Qorvo RFSW6222 C1 100 pF CAP, 100 pF, 5%, 50V, C0G, 0402 Taiyo Yuden RM UMK105 CG101JV-F C2 1000 pF CAP, 1000 pF, 10%, 50V, X7R, 0402 Murata GRM155R71E103KA01D R1 – R4 0 Ω RES, 0 Ω, 0402 Kamaya RMC1/16SJPTH RF1, RF2, RF1A, RF1B, RF2A, RF2B SMA CONN, SMA, END LUCH, MINI, FLT, 0.068” Aliner 20-001CF-T P1 - CONN, HDR, ST, PLRZD, 4-Pin, 0.100” ITW Pancon MPSS100-4-C

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 5 of 10 www.qorvo.com Performance Plots – RFSW6222PCK-410 Test conditions unless otherwise noted: VDD = +3.3 V, Single Ended 50 Ω System, Temp.=+25 °C

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 6 of 10 www.qorvo.com Pad Configuration and Description Top View Pad No. Label Description

1 GND DC and RF Ground

2 CB1 Control Input

3 VDD DC Supply Voltage Input

4 RF2B RF2 Output B

5 GND DC and RF Ground

6 RF2A RF2 Output A

7 RF2 RF2 Common Input

8 GND DC and RF Ground

9 RF1 RF1 Common Input

10 RF1A RF1 Output A

11 GND DC and RF Ground

12 RF1B RF1 Output B

Backside Paddle - RF and DC Ground. Must be soldered on PCB ground plane over a bed of via holes to minimize inductance and thermal resistance

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 7 of 10 www.qorvo.com Package Marking and Dimensions Marking: Part ID – I2 Trace Code – Assigned by subcontractor Notes: 1. All dimensions are in millimeters. Angles are in degrees. Interpret dimensions and tolerances per ASME Y14.5 - 2009 2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012. 3. Contact plating: Matte Sn PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Use 1 oz. copper minimum for top and bottom layer metal. 3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.01”). 4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 8 of 10 www.qorvo.com Tape and Reel Information – Carrier and Cover Tape Dimensions Feature Measure Symbol Size (in) Size (mm) Cavity Length A0 0.087 2.20 Width B0 0.087 2.20 Depth K0 0.037 0.95 Pitch P1 0.157 4.00 Centerline Distance Cavity to Perforation - Length Direction P2 0.079 2.00 Cavity to Perforation - Width Direction F 0.217 5.50 Cover Tape Width C 0.362 9.20 Carrier Tape Width W 0.472 12.0

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 9 of 10 www.qorvo.com Tape and Reel Information – Tape Length and Label Placement Notes: 1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481-1-A. 2. Labels are placed on the flange opposite the sprockets in the carrier tape. Tape and Reel Information – Reel Dimensions Standard T/R size = 2,500 pieces on a 7” reel. Feature Measure Symbol Size (in) Size (mm) Flange Diameter A 6.969 177.0 Thickness W2 0.717 18.2 Space Between Flange W1 0.504 12.8 Hub Outer Diameter N 2.283 58.0 Arbor Hole Diameter C 0.512 13.0 Key Slit Width B 0.079 2.0 Key Slit Diameter D 0.787 20.0

Classification | PRIVATE RFSW6222 Datasheet, Rev. D, March 10, 2021 | Subject to change without notice 10 of 10 www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) Class 2 ESDA / JEDEC JS-001-2012 ESD – Charged Device Model (CDM) Class C2a JEDEC JESD22-C101F MSL – Moisture Sensitivity Level Level 1 IPC/JEDEC J-STD-020 Solderability Solder profiles available upon request. Contact plating: Matte Sn (Plating thickness: 8~ 20 μm) RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes:

• Lead Free
• Halogen Free (Chlorine, Bromine)
• Antimony Free
• TBBP-A (C15H12Br402) Free
• SVHC Free Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2021 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Pb