DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
CATV Push Pull Hybrid 1218MHz 28dB Data Sheet Rev. C, November 14, 2017 | Subject to change without notice 1 of 4 www.qorvo.com Product Description The RFPP3870 is a Hybrid Push Pull amplifier module. The part employs GaAs MESFET, GaAs pHEMT and GaN HEMT die and is operated from 45 MHz to 1218 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability. Package: SOT-115J Product Features Excellent Linearity Superior Return Loss Performance Extremely Low Distortion Optimal Reliability Low Noise Unconditionally Stable Under all Terminations 28.0 dB Min Gain at 1218 MHz 270 mA Max. at 24 VDC
Applications
- 45 – 1218 MHz CATV Amplifier Systems Functional Block Diagram
Ordering Information
Part No. Description RFPP3870 Box with 50 pcs INPUT OUTPUT RFPP3870
Data Sheet Rev. C, November 14, 2017 | Subject to change without notice 2 of 4 www.qorvo.com Parameter Value / Range RF Input Voltage (single tone) 75 dBmV DC Supply over-voltage (5 minutes) +30 V Storage Temperature −40 to 100 °C Operating Mounting Base Temperature −30 to 100 °C Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications Parameter Test Conditions: V+=24V, TMB=30°C, ZS=ZL=75Ω Min Typ Max Unit Operational Frequency Range – 45 – 1218 MHz Gain fo = 45 MHz 27.0 dB Gain fo = 1218 MHz 28.0 28.5 29.5 Gain Slope 45 to 1218 MHz [1] 1.0 1.5 2.5 Gain Flatness 45 to 1218 MHz 0.8 Input Return Loss (-S11) fo= 45 to 320 MHz 20.0 – dB fo= 320 to 640 MHz 19.0 – fo= 640 to 870 MHz 18.0 – fo= 870 to 1000 MHz 17.0 – fo= 1000 to 1218 MHz 16.0 – Output Return Loss (-S22) fo= 45 to 320 MHz 20.0 – dB fo= 320 to 640 MHz 19.0 – fo= 640 to 870 MHz 18.0 – fo= 870 to 1000 MHz 17.0 – fo= 1000 to 1218 MHz 16.0 – Noise Figure fo= 50 to 1218 MHz – 4.6 5.5 dB Total Current Consumption (DC) 260 270 mA CTB VO = 46dBmV, flat, 79 analog channels plus 75 digital channels (-6dB offset) [2][4] -72 -66 dBc XMOD -63 -60 dBc CSO -78 -70 dBc CIN 67 69 dB CTB VO = 45dBmV, flat, 79 analog channels plus 111 digital channels (-6dB offset) [3][4] -72 dBc XMOD -65 dBc CSO -76 dBc CIN 70 dB 1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 79 analog channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +46dBmV flat output level, plus 75 digital channels, -6dB offset relative to the equivalent analog carrier. 3. 79 analog channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +45dBmV flat output level, plus 111 digital channels, -6dB offset relative to the equivalent analog carrier. 4. Composite Triple Beat (CTB) - The CTB parameter is defined by ANSI/SCTE 6. Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by ANSI/SCTE 6. Cross Modulation (XMOD) - Cross modulation (XMOD) is defined by ANSI/SCTE 58, measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested. Carrier to Intermodulation Noise (CIN) – The CIN parameter is defined by ANSI/SCTE17 (Test procedure for carrier to noise)
Data Sheet Rev. C, November 14, 2017 | Subject to change without notice 3 of 4 www.qorvo.com Package Drawing (Dimensions in millimeters) 123 5 7 89 R O Q M 5 10mm0 scale B N L F A D H øG T S PJ U I E C K European Projection Nominal Min Max A 44,6 ± 0,2 44,4 44,8 B 13,6 ± 0,2 13,4 13,8 C 20,4 ± 0,5 19,9 20,9 D 8 ± 0,15 7,85 8,15 E 12,6 ± 0,15 12,45 12,75 F 38,1 ± 0,2 37,9 38,3 H 4 ± 0,2 3,8 4,2 I 25,4 ± 0,2 25,2 25,6 J UNC 6-32 - - L 27,2 ± 0,2 27,0 27,4 M 11,6 ± 0,5 11,1 12,1 O 0,25 ± 0,02 0,23 0,27 P 0,45 ± 0,03 0,42 0,48 Q 2,54 ± 0,3 2,24 2,84 R 2,54 ± 0,5 2,04 3,04 S 2,54 ± 0,25 2,29 2,79 T 5,08 ± 0,25 4,83 5,33 U 5,08 ± 0,25 4,83 5,33 Pin Name
1 Input
9 Output
Pinning: Notes:
Data Sheet Rev. C, November 14, 2017 | Subject to change without notice 4 of 4 www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) 1C MIL-STD-1686 RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive 2015/863/EU. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO T HE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2017 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.