DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
POUT = 27dBm, 5V < 3% Dynamic EVM 33dB Typical Gain High PAE Integrated Input and Output 50Ω Match Integrated Power Detector Integrated Harmonic Filtering
Applications
WiFi 802.11 b/g/n Consumer Premise Equipment (CPE) Picocell; Femtocell Data Cards and Terminals Wireless Access Points, Gateways, Routers and Set Top Box Applications RFPA5200SB 5-Piece bag RFPA5200SR 100-Piece reel RFPA5200TR7 2500-Piece reel RFPA5200SQ 25-Piece bag RFPA5200PCK-410 RFPA5200 Eval board with 5-piece bag RFPA5200PCK-411 RFPA5200 Balanced ev al board with 5-piece bag DS130606 Preliminary Package: Laminate, 4mm x 4 mm x 1 mm
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Absolute Maximum Ratings Parameter Rating Unit Supply Voltage (RF Applied) -0.5 to +5.5 V Supply Voltage (No RF Applied) -0.5 to +6.0 V DC Supply Current 1000 mA Input RF Power with 50Ω Output Load 10 dBm Maximum VSWR with no damage 10:1 Operating Ambient Temperature -40 to +85 °C Storage Temperature -40 to +150 °C Moisture Sensitivity MSL3 Parameter Specification Unit ConditionMin. Typ. Max. Typical Conditions VCC = 5.0V, VREG = 2.9V, temperature = 25°C, MSC7 HT20 and HT40, frequency = 2412MHz to 2484MHz unless otherwise noted. Tx Performance - 11g/n Compliance with standard 802.11g/n Frequency 2412 2484 MHz 802.11n Output Power 26.5 dBm Dynamic EVM (11n) 2.5 3 % 802.11g Output Power 27 dBm OFDM 64QAM 54Mbps Dynamic EVM (11g) 2.5 3 % Second Harmonic -20 dBm/MHz At rated P OUT Third Harmonic -43 dBm/MHz Gain 31 33 dB 28 33 38 dB Temperature -40°C to +85°C Power Detect Range 0.1 2.1 V P OUT = 0dBm to 27dBm Power Detect Voltage 1.3 1.6 2.1 V At rated P OUT Input Return Loss - Tx input pin 10 15 dB In specified frequency band Output Return Loss at ANT pin 5 10 dB Operating Current 470 520 mA At rated P OUT Quiescent Current 150 185 mA V CC = 5.0, VCONTROL = 3V and RF = OFF PAE (Power Added Efficiency) 21 % At rated P OUT PDOWN Current - VCC Supply 10 mA PA_EN = 0V, V CC = 5V, VREG = 2.9V (includes IREG) IREG 51 0 m A VCC Leakage Current 10 μAV CC=5V, VREG = 0V, PA_EN=0V Operating Power Supply - VCC 55 . 2 5V VREG Voltage (at VREG pin of Eval board) 2.85 2.90 3.3 V Turn-on time from setting of VREGS 300 ns Output stable to within 90% of final gain Turn-off time from setting of VREGS4 0 0 n s Stability 4:1 No spurs above -47dBm CW P1dB 33 dBm Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Parameter Specification Unit ConditionMin. Typ. Max. Typical Conditions (continued) Tx Performance - Generic ESD Human Body Model 1000 V All pins Charge Device Model 1000 V All pins Thermal Resistance RTH_I 38 °C/W V CC=5V, POUT = 27dBm, 64QAM 54Mbps, duty cycle = 100%, heated stage = 85°CTJ-MAX 175 °C Pin Names and Descriptions Pin Name Description 1R F I N RF input, is internally matched to 50Ω. DC Blocked 2G N D Ground connection. 3V C C This pin is connected internally to the collectors of RF device. To achieve specified performance, the lay- out of the pin should match the Recommended Land Pattern 4N C No Connection internal, Can be grounded or left open 5P D E T Power detector provides an output voltage proportional to the RF output power level. 6R F O U T RF output, is internally matched to 50Ω. DC Blocked 7G N D Ground connection. 8G N D Ground connection. 9V R E G PA bias voltage. This pin requires regulated supply for best performance. 10 PA_EN PA Enable pin, Apply < 0.6VDC to turn PA off. Apply 1.75VDC to 5VDC to enable the PA. Pkg Base GND Ground connection. The back side of the package should be connected to the ground plane through as short connection as possible, e.g., PCB vias under the device are recommended.
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Pin Out RFOUT PA_EN Vreg NC/ GND Pdet VCC 3 1 10 2 9 GND RFIN GND GND 5 6
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Package Drawing
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Applications Schematic Pdet VCC 4.7uF RFOUT PA_EN RFIN RFOUT PA_EN Vreg NC/ GND Pdet VCC GND RFIN GND GND 1 10 2 9 5 6 Vreg For additional recommendations on system level applications and circuits, contact RFMD WCBU Applications Group at WCBUApps@RFMD
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. RFPA5200 Performance Plots 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 EVM (%) Output Power (dBm) RFPA5200: EVM vs. Output Power (OFDM 54Mbps; Vcc=5v; VREG=2.9v; 50% duty cycle; Temp=25C)
2412 MHz
2450 MHz
2484 MHz
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 EVM (%) Output Power (dBm) RFPA5200: EVM vs. Output Power ( MCS7 HT40; Vcc=5v; VREG=2.9v; 50% duty cycle; Temp=25C) 0.5 1.5 2.5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Power Detector (V) Output Power (dBm) RFPA5200: Power Detector vs. Output Power ( MCS7 HT40; Vcc=5v; VREG=2.9v; 50% duty cycle; Temp=25C) 0 1 2 3 4 5 6 7 8 9 1 01 11 21 31 41 51 61 71 81 92 02 12 22 32 42 52 62 72 82 93 0 Gain(dB) Output Power (dBm) RFPA5200: Gain vs. Output Power ( MCS7 HT40; Vcc=5v; VREG=2.9v; 50% duty cycle; Temp=25C) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1 2 3 4 5 6 7 8 9 1 01 11 21 31 41 51 61 71 81 92 02 12 22 32 42 52 62 72 82 93 0 Gain(dB) Output Power (dBm) RFPA5200: Operating Current vs. Output Power ( MCS7 HT40; Vcc=5v; VREG=2.9v; 50% duty cycle; Temp=25C) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 VReg Current(mA) Output Power (dBm) RFPA5200: VReg Current vs. Output Power ( MCS7 HT40; Vcc=5v; VREG=2.9v; 50% duty cycle; Temp=25C)
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. RFPA5200 Performance Plots (continued) -70 -60 -50 -40 -30 -20 -10 0123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 2 9 3 0 2nd Harmonic (dBm/MHz) Output Power (dBm) RFPA5200: 2nd Harmonic vs. Output Power (11b 1Mbps; Vcc=5v; VREG=2.9v; 100% duty cycle; Temp=25C) -70 -60 -50 -40 -30 -20 -10 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 3rd Harmonic (dBm/MHz) Output Power (dBm) RFPA5200: 3rd Harmonic vs. Output Power ( 11b 1Mbps; Vcc=5v; VREG=2.9v; 100% duty cycle; Temp=25C) -60 -50 -40 -30 -20 -10 1234 dB Frequency in GHz RFPA5200: S-Parameters Plots (Vcc=5v; VREG=2.9v; Temp=25C) S21 S22 S11 S12