DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

 0.5W CW Output Power at 3.6V  1W CW Output Power at 5V  32dB Small Signal Gain at 900MHz  >60% Efficiency @ PSAT  Digitally Controlled Output Power  380MHz to 960MHz Frequency Range  High Isolation

Applications

 Analog Communication Systems  900MHz Spread Spectrum Systems  400MHz Industrial Radios  Driver Stage for Higher Power  3V to 5V Applications  High Isolation Buffer DS120206 Package Style: QFN, 16-Pin, 3mmx3mm RFPA0133SQ Sample Bag with 25 Pieces RFPA0133SR 7” Reel with 100 Pieces RFPA0133TR7 7” Reel with 2500 Pieces RFPA0133PCK-410 860MHz to 930MHz PCBA with 5-piece Sample Bag RFPA0133PCK-411 430 MHz to 470 MHz PCBA with 5-piece Sample Bag

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Absolute Maximum Ratings Parameter Rating Unit Supply Voltage -0.5 to +5.25 V DC Power Down Voltage (VPD) -0.5 to +3.3 V VBIAS -0.5 to +3.3 V DC Supply Current 500 mA Input RF Power +10 dBm Output Load VSWR (See Note) 6:1 Ambient Operating Temperature -40 to +85 °C Storage Temperature -40 to +150 °C Note: Due to high efficiency of this PA, the maximum ICC should always be less than 400mA. Only under short term poor VSWR conditions is 500mA acceptable. Parameter Specification Unit ConditionMin. Typ. Max. Overall T=25° C, VCC=3.6V, V PD=VBIAS=3.0V , PIN=0dBm, Freq=9 15MHz CW Output Power 27.5 dBm V CC=3.6V CW Output Power 30 dBm V CC=5V Small Signal Gain 32 dB P IN=-10dBm Second Harmonic 23 dBc Without external second harmonic trap Third Harmonic 45 dBc CW Efficiency 55 63 % G16=“high”, G8=“high”, P IN=0dBm Power Down “ON” 3.0 V Voltage supplied to the input Power Down “OFF” 0 0.5 0.8 V Voltage supplied to the input VPD Input Current 6 mA Only in “ON” state G16, G8 “ON” 1.7 3.0 V Voltage supplied to the input G16, G8 “OFF” 0 0.7 V Voltage supplied to the input G16, G8 Input Current 1.0 mA Only in “ON” state Output Power 26.5 2 7 .5 29 dBm G16=“high”, G8=“high”, P IN=0dBm 21 23 25 dBm G16=“high”, G8=“low”, P IN=0dBm 14 16 18 dBm G16=“low”, G8=“high”, P IN=0dBm 3 5 8 dBm G16=“low”, G8=“low”, P IN=0dBm Turn On/Off Time 200 ns Power Supply Power Supply Voltage 3.6 V Specifications Power Supply Current 230 mA G16=“high”, G8=“high”, P IN=0dBm 150 mA G16=“high”, G8=“low”, P IN=0dBm 65 mA G16=“low”, G8=“high”, P IN=0dBm 35 mA G16=“low”, G8=“low”, P IN=0dBm Idle Current 40 75 110 mA G16=“high”, G8=“high”, No RF In 60 200 nA G16=“low”, G8=“low”, PD=“low”. No RF IN. Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. - 1 5 - 1 3 - 1 1 - 9- 7- 5- 3- 11 3 5 Output Power (dBm) Input Power (dBm) POUT versus PIN 860MHz to 930MHz at 3.6V and +25°C. RFPA0133_860MHz RFPA0133_900MHz RFPA0133_930MHz 20 21 22 23 24 25 26 27 28 29 Efficiency (%) Output Power (dBm) Efficiency versus POUT 860MHz to 930MHz at 3.6V and +25°C RFPA0133_860MHz RFPA0133_900MHz RFPA0133_930MHz Output Power (dBm) Input Power (dBm) POUT versus PIN 900MHz at 3.6V; -40°C to +85°C RFPA0133_-40C EFPA0133_+25C RFPA0133_+85C 20 21 22 23 24 25 26 27 28 29 Efficiency (%) Output Power (dBm) Efficiency versus POUT 900MHz at 3.6V; -40°C to +85°C RFPA0133_-40C RFPA0133_+25C RFPA0133_+85C POUT (dBm) VCC PSATversus VCC

900 MHz PIN=0 dBm

(%) VCC Saturated Efficiency versus VCC

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. NOTE: Thermal resistance and die temperature are measured at a PCB temperature of 85 C on a standard 900MHz evalua- tion board. 100 110 120 130 140 150 0 2 4 6 8 1 01 21 41 61 82 02 22 42 62 83 0 Thermal Resistance (° C/W) Power (dBm) Thermal Resistance versus Output Power 3.6V 5.0V 100 110 120 130 140 75 100 125 150 175 200 225 250 275 300 325 350 Thermal Resistance (° C/W) Current (mA) Thermal Resistance versus Current 3.6V 5.0V 100 110 120 130 140 150 160 0 5 10 15 20 25 30 Die Temperature (° C ) Output Power (dBm) Maximum Die Temperature versus Output Power

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Note: The 8dB and 16dB gain steps are approximate for small sign al operation. As the device compresses, the values of the gain steps compress as well. The output power table on page two shows the effect of the gain steps for saturated (0dBm input) operation. Pin Function Description 1,4,5, 7,8, 11, 15 NC These pins may be left unconnected or soldered to ground. 2G N D Ground connection. Keep traces physically short and connect immediately to the ground plane for best perfor- mance. 3R F I N Amplifier RF input. The amplifier does not contain internal DC blocking and, therefore, should be externally DC blocked before connecting to any device which has DC present or which contains a DC path to ground. 6V P D Power down control voltage. When this pin is at 0V, the device will be in power down mode, dissipating minimum DC power. When this pin is at 3V the device will be in full power mode delivering maximum gain and output power capability. This pin should not, in any circumstance, be higher than 3.3V. This pin should also have an external UHF and HF bypassing capacitor. Typically VBIAS=VPD=3.0V . 9,10 RF OUT/VCC2 Amplifier RF output. This is an unmatched collector output of the final amplifier transistor. Bias for the final power amplifier output transistor must also be provided through one of these pins. Pins 9 and 10 should be used for the RF output with a matching network that presents the optimum load impedance to the PA for maxi- mum power and efficiency, as well as providing DC blocking at the output. 12 G8 RF output power gain control 8dB bit (see specification table for logic). The control voltage at this pin should never exceed 3.3V and a logic high should be at least 1.7V. This pin should also have an external UHF bypassing capacitor. See note. 13 G16 RF output power gain control 16dB bit (see specification table for logic). The control voltage at this pin should never exceed 3.3V and a logic high should be at least 1.7V. This pin should also have an external UHF bypassing capacitor. See note. 14 VCC1 Positive supply for the first stage (driver) amplifier. This is an unmatched transistor collector output. 16 VBIAS Positive supply for the bias circuits. This pin should be bypassed with a single UHF capacitor, placed as close as possible to the package. Typically, VBIAS=VPD=3.0V .

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Evaluation Board Schematic 860MHz to 930MHz 5 6 7 8 16 15 14 13 RFPA0133410(B) 865 – 930 MHz All components are 0402 unless specified otherwise. DNP 10 nH Coilcraft 0603 C11 100 pF C12 DNP C17 2.2 F RF OUT/VCC2 3.3 nH Coilcraft 100 pF C10 5.6 pF Johanson C16 DNP RF OUT 100 pF 2.2 F VPD 4.7 nH Toko 100 pF C15 DNP RF IN 100 pF C14 2.2 F VBIAS 2.7 nH Toko 100 pF (See Table Below) VCC1 C13 2.2 F 100 pF DNP G16 100 pF VCC1/VCC2 (Volts) R2 () 5.0 30 4.5 20 4.0 10 <3.6 3.9 Note: R2 values are approximate. The resistor values may be changed by ±1 standard value for convenience.

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Evaluation Board Schematic 430MHz to 470MHz 5 6 7 8 16 15 14 13 RFPA0133

430 MHz

2.2 F RF OUT/VCC2 10.4 nH Coilcraft 0604 100 pF C10 9.1 pF Johanson C16 DNP RF OUT 100 pF 2.2 F VPD 18 nH Toko 100 pF C15 220  RF IN 100 pF C14 2.2 F VBIAS 10 nH Toko 33 pF (See Table Below) VCC1 C13 2.2 F 100 pF DNP G16 100 pF VCC1/VCC2 (Volts) R2 () 5.0 30 4.5 20 4.0 10 <3.6 3.9 Note: R2 values are approximate. The resistor values may be changed by ±1 standard value for convenience.

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Evaluation Board Layout

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Package Drawing Branding Diagram