QM77038

Qorvo, Inc

Linear Multi-Mode Mid and High Band S-PAD

Manufacturer: Qorvo, Inc

Document: 43 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

Read QM77038 online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 43

Technical content

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 1 of 43 www.qorvo.com Product Overview The Qorvo® QM77038 is a multi-mode, high efficiency linear Mid Band and High Band S-PAD (Switched PA plus Duplexer) module designed for use as the integrated RF front-end in multi- mode WCDMA / CDMA / LTE / NR mobile cellular equipm ent. The high efficiency S -PAD contains three amplifier paths for 3G/4G/5G Mid and High Band frequencies followed by distribution switches, filters, duplexers, quadplexers and antenna switches for multi-band coverage of both transmit and receive functions. QM77038 band select and bias are programmed through the Mobile Industry Processor Interface (MIPI) bus. The QM77038 transmit-receive module supports Average Power Tracking (APT) for higher system efficiency at various powe r levels and modulations, as well as Envelope Tracking (ET) for current consumption optimization. The QM77038 is packaged in a RoHS -compliant, compact 62-pin, 6.5 x 8.6 x 0.8 (max) mm surface -mount leadless package. Functional Block Diagram Functional Block Diagram 62 Pin 6.5x8.6 mm leadless SMT Package Key Features

Multi-Mode and Multi Band Capabilities; WCDMA/CDMA2000/ FDD-LTE/TDD-LTE / NR
Integrated Band 1, 3, 4, 7, 32, 34, 39, 40 and 41(38) Filters for Transmit and Receive
Additional Bands Through External AUX Paths
MIPI RFFE Digital Control Interface
Intra-Band Uplink and Downlink Ca23rrier Aggregation (CA): B1, B3, B7, B39, B40, B41.
Inter-band Downlink Carrier Aggregation (DL CA):
B1+B3, B1+B3+B7, B1+B3+B40, B1+B3+B41N,
Designed and Optimized for Use with DC-DC Converter
Support of Average Power Tracking (APT) and Envelope Tracking (ET) for High System Efficiency and Performance
Supports Power Class 2 (PC2) for B40 & B41.
Supports 5G NR for n1, n3, n40, and n41 (38).
Power Modes and Bias Programmable with MIPI RFFE 2.1 Interfaces

Applications

3G/4G/5G Multi-Mode Handsets
WCDMA and LTE Data Cards or Wearable Devices
High Performance Communication Systems
LTE Single Carrier Channel Bandwidths up to 20MHz

Ordering Information

QM77038TR13 13” Reel with 5000 pieces QM77038PCK-APT Evaluation board and 5 pc sample QM77038SB Sample Bag with 5 pc sample QM77038DK-APT Design Kit includes EVB with module, RD2000 Communication Board and Harness. MB Tx1 B3/B4/B66 Tx B1 Tx B1/B4/B66 Rx B40 TRx B1/3/4/66 B34/39 B30 B38/40/4141N MB Tx2 HB Tx1 MB IN HB IN SDATA SCLK TRx 2 ANT 2 ANT 1 CPL OUT B41 Rx B40 Rx B39/B2 Rx B34 Rx B3 Rx B1/B4/B66 Rx B7 Rx MIPI TRx 3 TRx 4 2G HB IN TRx 1 B32 Rx B3 Rx B41N TRx B7 Tx B7 Rx B41 TRx B39 TRx B34 TRx B32 Rx

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 2 of 43 www.qorvo.com Absolute Maximum Ratings PARAMETER CONDITIONS Rating Storage Temperature −55 to +150 °C Operating Temperature −30 to +85 °C Supply Voltage, VCC Standby Mode +6.0 V Idle Mode +6.0 V Operating Mode +5.0 V Supply Voltage, VBATT -1.2V to +6.0 V Digital control signals (VIO, SLCK, SDATA) +2 V RF Input Power CW, 50 Ω, T = 25 °C +10 dBm Output Load VSWR (Ruggedness) Ant and MB_HB Tx Aux Ports No damage or permanent performance degradation. Ruggedness is guaranteed with closed loop condition with fixed Forward Pout=Prated. VBATT = 4.8V, VCC = 4.6V. 10:1 Calibration Output Load VSWR (Ruggedness) Ant and MB_HB Tx Aux Ports No damage or permanent performance degradation. Ruggedness is guaranteed with fixed Pin (1) (Open loop) condition. Pout = Max Prated + 2dB or P1dB. Vcc = 4.6V, Vbatt = 4.8V. Phase = 15/step, 10s dwell at each step. Temp = -30 / 25 / 85 C. 10:1 Notes: 1. Pin is defined as the RF input level that delivers Max Prated+2dB or P1dB (if PA is saturated and cannot achieve Prated+2dB ) into 50 load, at L/M/H frequencies for each band, and at each temperature. 2. Pin is defined as the CW signal input level that delivers target pow er into 50 load, at L/M/H frequencies for each band, and at each temperature. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extend ed application of the Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating con ditions is not implied. Recommended Operating Conditions PARAMETER MIN. TYP. MAX. UNITS Operating Frequency Range 1452 - 2690 MHz Operating Ambient Temperature -20 +25 +85 °C Supply Voltage, VBATT +3.0 3.8 +4.8 V Supply Voltage, VCC1, VCC2 +0.5(1) 3.8 +4.6 V Supply Voltage, VIO +1.65 +1.8 +1.95 V VIO Rise Time - - 400 µs RF Input Power - - +6 dBm SCLK, SDATA Logic Low 0 - 0.3*VIO V SCLK, SDATA Logic HIGH 0.8*VIO - VIO V SCLK, SDATA Input, Current - - 50 µA SCLK Write Speed - 38.4 52 MHz SCLK Read Speed - - 26 MHz Total Leakage Current (ICC+IBAT) - - 20 µA Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Notes: 1. VCC down to 0.5V may be used for backed-off power when using DC-DC converter to reduce low power current drain. Refer to Look -up Table (LUT) for recommended VCC settings for each output power level.

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 3 of 43 www.qorvo.com 5G NR Waveforms 5G Waveform Duplex Mode Channel BW SCS Modulation RB Allocation RB Allocated RB start MPR NR 1 FDD 50 30 OFDM QPSK Inner_Full 64 32 0 NR2 FDD 50 30 OFDM QPSK Outer_Full 128 0 1 NR 3 FDD 50 30 OFDM 256QAM Outer_Full 128 0 4.5 NR 4 FDD 30 15 OFDM QPSK Inner_Full 80 40 0 NR 5 FDD 30 15 OFDM QPSK Outer_Full 160 0 1 NR 6 FDD 30 15 OFDM 256QAM Outer_Full 160 0 4.5 NR 7 TDD 100 30 OFDM QPSK Inner_Full 135 67 0 NR 8 TDD 100 30 OFDM QPSK Outer_Full 270 0 1 NR 9 TDD 100 30 OFDM 256QAM Outer_Full 270 0 4.5 NR 10 TDD 80 30 OFDM QPSK Inner_Full 108 54 0 NR 11 TDD 80 30 OFDM QPSK Outer_Full 216 0 1 NR 12 TDD 80 30 OFDM 256QAM Outer_Full 216 0 4.5

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 4 of 43 www.qorvo.com Electrical Specifications Parameter Conditions Min. Typ. Max. Units 5G NR Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range NR Band n1 1920 1980 MHz Maximum Linear Output Power HPM, VCC = 3.8V NR 1 25.5 dBm Gain HPM, VCC = 3.8V NR 1 25 27.5 31 dB HPM, VCC = 3.8V, VBAT=3.8V, Temp = -20°C to +85°C NR 1 22 26.5 32 LPM, VCC =1.3V, Pout=11.5dBm NR 1 20 23 26 LPM, VCC =0.7V, Pout=1.5dBm NR 1 14 18 22 PAE HPM, VCC = 3.8V, Pout = Pmax NR 1 10 14.5 % Current Consumption HPM, VCC = 3.8V, Pout = Pmax NR 1 640 800 mA LPM, VCC ≤ 0.7V, Pout = 1.5dBm NR 1 100 200 EUTRA ACLR HPM, VCC = 3.8V, Pout ≤ Pmax NR 2 -38 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax NR 2 -42 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax NR 2 -48 -39 EVM HPM, VCC = 3.8V, Pout ≤ Pmax NR 3 1.6 2.1 %

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 5 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G FDD LTE Band 1 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 1 1920 1980 MHz Maximum Linear Output Power ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V, Temp = -20°C to +85°C 24.5 Gain HPM, VCC = 3.8V 25 27.5 30.5 dB HPM, VCC = 3.8V, VBATT=3.8V, Temp = -20°C to +85°C 22 26.5 31.5 LPM, VCC =1.3V, Pout=11.5dBm 20 23 26 LPM, VCC =0.70V, Pout=1.5dBm 14 18 22 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -42 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -43 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -62 -39 EVM All modulations 1.25 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 10 15 % Quiescent Current HPM, VCC = 3.8V, No RF 150 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 650 800 mA LPM, VCC = 0.70V, Pout = 1.5dBm 100 200 RX Band Noise 2110 – 2170MHz, 20MHz QPSK 50RB -183 -176 dBm/Hz B32 Rx Band Noise DL CA B1 + B32, 1452 – 1496MHz, HPM -184 -173 B7 Rx Band Noise DL CA B1 + B7, 2620 – 2690MHz, HPM -181 -173 B3 RX Band Noise (1805 – 1880MHz) DL CA B1 +B3, Tx = Low Channel, HPM -185 -173 DL CA B1 +B3, Tx=Hi Channel, HPM -184 -173 LB RX Band Noise 699 – 960MHz, 40MHz QPSK 200RB -165 -150 HB RX Band Noise 2300 – 2700MHz, 40MHz QPSK 200RB -170 -155 B42 RX Band Noise 3400 – 3600MHz, 40MHz QPSK 200RB -175 -160 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 40MHz QPSK 200RB -192 -177 GPS Band Noise 1574 – 1577MHz, 40MHz QPSK 200RB -172 -160 Harmonics 2f0 -75 -60 dBm 3f0 -65 -50 ≥4f0 -68 -48 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -20°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 6 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 3G WCDMA Band 1 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VCC = 3.8V, VBATT= 3.8V, APT Mode, R99 Operational Frequency Range Band 1 1920 1980 MHz Maximum Output Power HPM, VCC = 3.8V 26.5 dBm HPM, VCC = 3.8V, VBATT= 3.8V, Temp = -20°C to +85°C 25.5 Gain HPM, VCC = 3.8V 24.5 27.5 30.5 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 21.5 26.5 31.5 UMTS ACLR1 (±5MHz) Pout ≤ Pmax -45 -36 dBc UMTS ACLR2 (±10MHz) Pout ≤ Pmax -58 -46 EVM All Condition 1.0 5 % PAE HPM, Pout = Pmax 11 16 % Current Consumption HPM, Pout = Pmax 730 900 mA Phase discontinuity variation -- 10 Degree RX Band Noise Pout ≤ Pmax -190 -175 dBm/Hz ISM 2.4G Noise 2400 to 2483 MHz -185 -170 ISM 5G Noise (except harmonics) 5150 to 5850 MHz -190 -175 GPS Band Noise 1574 to 1577 MHz -178 -166 Harmonics 2f0 -68 -53 dBm 3f0 -60 -45

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 7 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band B1,B4,B66 RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 1 2110 2170 MHz Band 4 2110 2155 Band 66 (70 MHz) 2110 2180 Insertion Loss Band 1,4 (2110 – 2170 MHz) 3.2 4.1 dB Band 1,4 (2110 – 2170 MHz) ETC 4.5 Band 66 (2110 – 2180 MHz) 3.2 4.2 Band 66 (2110 – 2180 MHz) ETC 4.6 Band 66 -2 (2110 – 2200 MHz) 5.0 Band 1 + 41N 4.5 Band 1 + 7 4.5 RX Port VSWR 2 X:1 Attenuation B3 TX, 1710 – 1785MHz 45 60 dB LB TX, 699 – 960MHz 45 60 HB TX, 2300 – 2690MHz 50 65 B42 TX, 3400 – 3600MHz 55 70 ISM 2.4G 45 60 ISM 2.5G 35 50 TX to RX Isolation Self-Isolation at RX Band 2110 – 2180MHz 15 30 dB Self-Isolation TX power to RX port 1920 – 1980MHz, 5 MHz QPSK 25RB -32 -26 dBm/5MHz Cross Isolation at B3 RX Band 1805 – 1880MHz 18 33 dB Cross B3 TX power to B1 RX port 1710 – 1785MHz, 1.4MHz QPSK 6RB -26 -23 dBm/1.4MHz Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 8 of 43 www.qorvo.com Parameter Conditions Min. Typ. Max. Units 5G NR Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range NR Band n3 1710 1785 MHz Maximum Linear Output Power HPM, VCC = 3.8V, NR 4 25.5 dBm Gain HPM, VCC = 3.8V NR 4 26.5 29 32 dB HPM, VCC = 3.8V, VBAT=3.8V, Temp = -20°C to +85°C NR 4 23.5 28 33.4 LPM, VCC =1.3V, Pout=11.5dBm NR 4 21 24 27 LPM, VCC =0.7V, Pout=1.5dBm NR 4 15 19 23 PAE HPM, VCC = 3.8V, Pout = Pmax NR 4 10 15 % Current Consumption HPM, VCC = 3.8V, Pout = Pmax NR 4 600 750 mA LPM, VCC ≤ 0.7V, Pout = 1.5dBm NR 4 90 180 EUTRA ACLR n3, HPM, VCC = 3.8V, Pout ≤ Pmax NR 5 -43 -33 dBc UTRA - ACLR1 n3, HPM, VCC = 3.8V, Pout ≤ Pmax NR 5 -45 -36 UTRA - ACLR2 n3, HPM, VCC = 3.8V, Pout ≤ Pmax NR 5 -53 -39 EVM n3, HPM, VCC = 3.8V, Pout ≤ Pmax NR 6 1.0 2.1 %

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 9 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G FDD LTE Band 3/4/66 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 3 1710 1785 MHz Band 4 1710 1755 Band 66 1710 1780 Maximum Linear Output Power ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 Gain HPM, VCC = 3.8V 25.5 28 31.5 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 22.5 27 32.5 LPM, VCC =1.3V, Pout=11.5dBm 20 23 26 LPM, VCC =0.7V, Pout=1.5dBm 15 19 23 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -48 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -50 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -58 -39 EVM All modulations 1.0 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 10 15 % Quiescent Current HPM, VCC = 3.8V, No RF 100 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 635 800 mA LPM, VCC = 0.7V, Pout = 1.5dBm 90 180 RX Band Noise 1805 – 1880MHz, 20MHz QPSK 50RB -185 -176 dBm/Hz B32 Rx Band Noise DL CA B3 + B32, 1452 – 1496MHz, HPM -178 -173 B7 Rx Band Noise DL CA B3 + B7, 2620 – 2690MHz, HPM -181 -173 B1 Rx Band Noise DL CA B3 + B1, 2110 – 2170MHz, HPM -186 -175 LB RX Band Noise 699 – 960MHz, 40MHz QPSK 200RB -175 -160 HB RX Band Noise 2300 – 2700MHz, 40MHz QPSK 200RB -175 -160 B42 RX Band Noise 3400 – 3600MHz, 40MHz QPSK 200RB -170 -155 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 40MHz QPSK 200RB -175 -160 GPS Band Noise 1574 – 1577MHz, 40MHz QPSK 200RB -168 -153 Harmonics 2f0 -62 -47 dBm 3f0 -72 -57 4f0 -40 -33 ≥5f0 -75 -65 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 10 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 3 RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 3 1805 1880 MHz Insertion Loss Band 3 2.9 3.8 dB Band 3 ETC 4.3 Band 3 + 41N 4.3 Band 3 + 7 4.3 RX Port VSWR 2.5 X:1 Attenuation B1 TX, 1920 – 1980MHz 45 60 dB LB TX, 699 – 960MHz 60 75 HB TX, 2300 – 2690MHz 53 68 B42 TX, 3400 – 3600MHz 41 56 ISM 2.4G, 2400 - 2484 52 67 ISM 5G, 5150 - 5850 43 58 TX to RX Isolation Self-Isolation at RX Band 1805 – 1880MHz 24 40 dB Self-Isolation TX power to RX port 1710 – 1785MHz, 1.4MHz QPSK 6RB -30 -25.5 dBm/1.4MHz Cross Isolation at B1 RX Band 2110 – 2200MHz 20 33 dB Cross TX power B1 TX to B3 RX 1920 – 1980MHz, 5MHz QPSK 25RB -32 -25.5 dBm/5MHz PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 32 RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 32 1452 1496 MHz Insertion Loss Band 32 3.1 4.1 dB Band 32 ETC 4.6 Band 32 +1 4.6 Band 32 + 3 4.6 Band 32 +7 4.6 RX Port VSWR 2.5 X:1 Attenuation ISM 2.4G, 2400 – 2484 MHz 47 62 dB ISM 5G, 4905 – 5850 MHz. 47 72 Cross TX power B3 TX to B32 RX 1710.7 – 1784.3MHz, 1.4MHz QPSK 6RB -24 -22 dBm/1.4MHz Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 11 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G TDD LTE Band 34 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 34 2010 2025 MHz Maximum Linear Output Power ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 Gain HPM, VCC = 3.8V 26.5 29 31 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 23.5 28 33 LPM, VCC =1.3V, Pout=11.5dBm 21 24 27 LPM, VCC =0.7V, Pout=1.5dBm 15 19 23 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -43 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -45 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -60 -39 EVM All modulations 1.3 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 12 17 % Quiescent Current HPM, VCC = 3.8V, No RF 100 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 575 750 mA LPM, VCC = 0.7V, Pout = 1.5dBm 90 180 HB RX Band Noise 2300 – 2700MHz, 15MHz QPSK 75RB -163 -148 dBm/Hz ISM 5G Noise (except harmonics) 5150 – 5850MHz, 15MHz QPSK 75RB -173 -158 GPS Band Noise 1574 – 1577MHz, 15MHz QPSK 75RB -167 -152 Harmonics 2f0 -75 -60 dBm 3f0 -73 -58 ≥4f0 -70 -50 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 12 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 3G TD-SCDMA Band 34 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VCC = 3.8V, VBATT = 3.8V, APT Mode, TD-SCDMA modulation Operational Frequency Range Band 34 2010 2025 MHz Maximum Output Power HPM, VCC = 3.8V 26.5 dBm HPM, VCC = 3.8V, VBATT = 3.8V, Temp = -20°C to +85°C 25.5 Gain HPM, VCC = 3.8V 26.5 29 31 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 23.5 28 33 UMTS ACLR1 (±1.6MHz) Pout ≤ Pmax -50 -36 dBc UMTS ACLR2 (±3.2MHz) Pout ≤ Pmax -67 -46 EVM All Condition 1.3 5 % PAE HPM, Pout = Pmax 14 19 % Current Consumption HPM, Pout = Pmax 650 825 mA RX Band Noise 925 – 935MHz -116 -101 dBm/100kHz 935 – 960MHz -166 -151 1805 – 1880MHz -114 -100 ISM 2.4G Noise 2400 to 2483 MHz -164 -150 dBm/Hz ISM 5G Noise (except harmonics) 5150 to 5850 MHz -168 -153 GPS Band Noise 1574 to 1577 MHz -172 -157 Harmonics 2f0 -75 -60 dBm 3f0 -73 -58 PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 34 RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 34 2010 2025 MHz Insertion Loss Band 34 2.4 3.4 dB Band 34 ETC 4.5 RX Port VSWR 2 X:1 Attenuation B41 TX, 2496 – 2690MHz 35 50 dB ISM 2.4G, 2400 – 2484 MHz 35 50 ISM 5G, 5150 – 5850 MHz 45 60 Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 13 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G TDD LTE Band 39 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 39 1880 1920 MHz Maximum Linear Output Power ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 Gain HPM, VCC = 3.8V 27.5 30 33 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 29 34 LPM, VCC =1.3V, Pout=11.5dBm 22 25 28 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -48 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -50 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -57 -39 EVM All modulations 1.2 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 12 17 % Quiescent Current HPM, VCC = 3.8V, No RF 150 300 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 575 750 mA LPM, VCC = 0.7V, Pout = 1.5dBm 95 190 HB RX Band Noise 2300 – 2700MHz, 35MHz QPSK 175RB -175 -160 dBm/Hz ISM 5G Noise (except harmonics) 5150 – 5850MHz, 20MHz QPSK 100RB -185 -170 GPS Band Noise 1574 – 1577MHz, 20MHz QPSK 100RB -177 -162 Harmonics 2f0 -75 -40 dBm 3f0 -73 -58 ≥4f0 -69 -50 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 14 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 3G TD-SCDMA Band 39 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VCC = 3.8V, VBATT = 3.8V, APT Mode, TD-SCDMA modulation Operational Frequency Range Band 39 1880 1920 MHz Maximum Output Power HPM, VCC = 3.8V 26.5 dBm HPM, VCC = 3.8V, VBATT = 3.8V, Temp = -20°C to +85°C 25.5 Gain HPM, VCC = 3.8V 27.5 30 33 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 29 34 UMTS ACLR1 (±1.6MHz) Pout ≤ Pmax -51 -36 dBc UMTS ACLR2 (±3.2MHz) Pout ≤ Pmax -66 -46 EVM All Condition 1.3 5 % PAE HPM, Pout = Pmax 14 19 % Current Consumption HPM, Pout = Pmax 675 850 mA RX Band Noise 925 – 935MHz -116 -101 dBm/100kHz 935 – 960MHz -116 -101 1805 – 1880MHz -117 -102 ISM 2.4G Noise 2400 to 2483 MHz -164 -150 dBm/Hz ISM 5G Noise (except harmonics) 5150 to 5850 MHz -182 -167 GPS Band Noise 1574 to 1577 MHz -176 -161 Harmonics 2f0 -75 -40 dBm 3f0 -73 -58 PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 39 RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 39 1880 1920 MHz Insertion Loss Band 39 2.5 3.4 dB Band 39 ETC 3.8 Band 39 +41 3.8 RX Port VSWR 2.5 X:1 Attenuation B41 TX, 2496 – 2690MHz 40 60 dB ISM 2.4G, 2400 – 2484 MHz 40 55 ISM 5G, 5150 – 5850 MHz 45 60 Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 15 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G LTE MB MB_TX1, MB_TX2 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Mid Band 1710 2025 MHz Maximum Linear Output Power HPM, VCC = 3.8V 29 dBm HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 28 Gain HPM, VCC = 3.8V 28 30.5 33.5 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 25 29.5 35.5 LPM, VCC =1.3V, Pout=15dBm 24 27 30 LPM, VCC =0.7V, Pout=5dBm 17 21 25 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -41 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -42 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -54 -39 EVM All modulations 1.5 5 % Gain transient time Gain transient time between PA modes - 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 25 30 % Quiescent Current HPM, VCC = 3.8V, No RF 150 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 675 850 mA LPM, VCC = 0.7V, Pout = 5dBm 95 190 B2 Rx In Band Noise 1930 – 1990MHz, HPM -128 -127 dBm/Hz 2.4G Noise 2401 – 2495 MHz, HPM -150 -133 LB RX Band Noise 699 – 960MHz, 20MHz QPSK 100RB -150 -135 HB RX Band Noise 2300 – 2700MHz, 20MHz QPSK 100RB -153 -138 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 20MHz QPSK 100RB -160 -145 GPS Band Noise 1574 – 1577MHz, 20MHz QPSK 100RB -137 -122 Harmonics 2f0 -10 0 dBm 3f0 -20 -10 ≥4f0 -20 0 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 16 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 3G WCDMA MB_TX1, MB_TX2 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VCC = 3.8V, VBATT= 3.8V, APT Mode, R99 Operational Frequency Range Band 2 1850 1910 MHz Maximum Output Power HPM, VCC = 3.8V 29.5 dBm HPM, VCC = 3.8V, VBATT = 3.8V, Temp = -20°C to +85°C 28.5 Gain HPM, VCC = 3.8V 28.5 31 34 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 25.5 30 35 UMTS ACLR1 (±5MHz) Pout ≤ Pmax -46 -36 dBc UMTS ACLR2 (±10MHz) Pout ≤ Pmax -57 -47 EVM All Condition 1.5 5 % PAE HPM, Pout = Pmax 25 30 % Current Consumption HPM, Pout = Pmax 770 925 mA Phase discontinuity variation -15 15 Degree ISM 2.4G Noise 2400 to 2483 MHz -146 -131 dBm/Hz ISM 5G Noise (except harmonics) 5150 to 5850 MHz -145 -130 GPS Band Noise 1574 to 1577 MHz -140 -125 Harmonics 2f0 -14 0 dBm 3f0 -27 -12 PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 3G CDMA2000 MB_TX1, MB_TX2 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VCC = 3.8V, VBATT = 3.8V, APT Mode, 1xRTT C2k Operational Frequency Range Band Class 1 1850 1910 MHz Maximum Output Power HPM, VCC = 3.8V 29.5 dBm HPM, VCC = 3.8V, VBATT = 3.8V, Temp = -20°C to +85°C 28.5 Gain HPM, VCC = 3.8V 28 30.5 34 dB HPM, VCC = 3.8V, VBATT=3.8V, Temp = -20°C to +85°C 25 30 35 CDMA ACLR1 (±1.25MHz) Pout ≤ Pmax -60 -45 dBc CDMA ACLR2 (±1.98MHz) Pout ≤ Pmax -72 -53 EVM All Condition 1.5 5 % PAE HPM, Pout = Pmax 25 30 % Current Consumption HPM, Pout = Pmax 760 950 mA Phase discontinuity variation -15 15 Degree ISM 2.4G Noise 2400 to 2483 MHz -144 -130 dBm/Hz ISM 5G Noise (except harmonics) 5150 to 5850 MHz -145 -130 GPS Band Noise 1574 to 1577 MHz -139 -125 Harmonics 2f0 -9 0 dBm 3f0 -20 -5

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 17 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G FDD LTE Band 7 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 7 2500 2570 MHz Maximum Linear Output Power ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 Gain HPM, VCC = 3.8V 25 27.5 31 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 22 26.5 33.8 LPM, VCC =1.2V, Pout=8.5dBm 20 23 26 LPM, VCC =0.7V, Pout=1.5dBm 14 18 22 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -40 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -42 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -55 -39 EVM All modulations 1.8 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 10 15 % Quiescent Current HPM, VCC = 3.8V, No RF 125 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 650 890 mA LPM, VCC = 0.7V, Pout = 1.5dBm 95 190 RX Band Noise 2620 – 2690MHz, 20MHz QPSK 75RB -180 -176 dBm/Hz B1 Rx Band Noise DL CA B7 + B1, 2110 – 2170MHz, HPM -184 -175 B3 Rx Band Noise DL CA B7 + B3, 1805 – 1880MHz, HPM -187 -173 B32 Rx Band Noise DL CA B7 + B32, 1452 – 1496MHz, HPM -180 -173 LB RX Band Noise 699 – 960MHz, 40MHz QPSK 200RB -185 -170 MB RX Band Noise 1452 – 2200MHz, 40MHz QPSK 200RB -180 -165 UL20M ISM Noise 2400 – 2472MHz, 20MHz QPSK 100RB -154 -140 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 40MHz QPSK 200RB -185 -170 GPS Band Noise 1574 – 1577MHz, 40MHz QPSK 200RB -182 -167 Harmonics 2f0 -72 -57 dBm 3f0 -72 -57 ≥4f0 -65 -45 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 18 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 7 RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 7 2620 2690 MHz Insertion Loss Band 7 3.4 4.2 dB Band 7 ETC 4.7 Band 7 + 1 4.7 Band 7 + 3 4.7 RX Port VSWR 2.5 X:1 Attenuation LB TX, 699 – 960MHz 43 58 dB MB TX, 1427 – 1980MHz 42 57 ISM 2.4G, 2400 – 2484 MHz 45 60 ISM 5G, 5150 – 5850 MHz 55 70 TX to RX Isolation Self-Isolation at RX Band 2620 – 2690MHz 30 45 dBc Self-Isolation TX power to RX port 2500 – 2570MHz, 5MHz QPSK 25RB -35 -25.5 dBm/5MHz Cross B1 TX power to B7 RX port 1922.2 – 1977.5MHz, 5MHz QPSK 6RB -27 -23 dBm/5MHz Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 19 of 43 www.qorvo.com Parameter Conditions Min. Typ. Max. Units 5G NR n40 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range NR Band n40 2300 2400 MHz Maximum Linear Output Power HPM, VCC = 3.8V, NR 10 25.5 dBm Gain HPM, VCC = 3.8V NR 10 25 27.5 30.5 dB HPM, VCC = 3.8V, VBAT=3.8V, Temp = -20°C to +85°C NR 10 22 26.5 31.5 LPM, VCC =1.1V, Pout=11.5dBm NR 10 21 24 27 LPM, VCC =0.6V, Pout=1.5dBm NR 10 14 18 22 PAE HPM, VCC = 3.8V, Pout = Pmax NR 10 10 15 % Current Consumption HPM, VCC = 3.8V, Pout = Pmax NR 10 625 800 mA LPM, VCC ≤ 0.6V, Pout = 1.5dBm NR 10 85 170 EUTRA ACLR HPM, VCC = 3.8V, Pout ≤ Pmax NR 11 -39 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax NR 11 -41 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax NR 11 -49 -39 EVM HPM, VCC = 3.8V, Pout ≤ Pmax NR 12 1.6 2.1 %

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 20 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G TDD LTE Band 40 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 40 2300 2400 MHz Maximum Linear Output Power (Power Class 3) ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 Maximum Linear Output Power (Power Class 2) ET Mode 28 dBm HPM, VCC = 4.2V 27 HPM, VCC = 4.2V, VBATT=3.8V, Temp = -20°C to +85°C 26 Gain HPM, VCC = 3.8V 25 27.5 30.5 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 22 26.5 31.5 LPM, VCC =1.1V, Pout=11.5dBm 21 24 27 LPM, VCC =0.6V , Pout=1.5dBm 14 18 22 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -45 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -46 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -54 -39 EVM All modulations 1.5 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 10 15 % Quiescent Current HPM, VCC = 3.8V, No RF 120 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 625 800 mA LPM, VCC = 0.6V, Pout = 1.5dBm 85 170 LB RX Band Noise 699 – 960MHz, 40MHz QPSK 200RB -184 -169 dBm/Hz MB RX Band Noise 1452 – 2200MHz, 40MHz QPSK 200RB -142 -127 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 40MHz QPSK 200RB -182 -167 GPS Band Noise 1574 – 1577MHz, 40MHz QPSK 200RB -183 -168 Harmonics 2f0 -75 -60 dBm 3f0 -70 -55 ≥4f0 -65 -50 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 21 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 40 RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 40 2300 2400 MHz Insertion Loss Band 40 3.4 4.4 dB Band 40 ETC 4.9 Band 40 + 3 4.9 RX Port VSWR 2 X:1 Attenuation LB TX, 699 – 960MHz 51 66 dB MB TX, 1427 – 1980MHz 48 63 ISM 5G, 5150 – 5850 MHz 43 58 Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 22 of 43 www.qorvo.com Parameter Conditions Min. Typ. Max. Units 5G NR n41 (n38) Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range NR Band n38 2570 2620 MHz NR Band n41 2496 2690 MHz Maximum Linear Output Power HPM, VCC = 4.2V, NR 7 25.5 dBm Gain HPM, VCC = 4.2V NR 7 26 29 32 dB HPM, VCC = 4.2V, VBAT=3.8V, Temp = -20°C to +85°C NR 7 23 28 33 LPM, VCC =1.2V, Pout=11.5dBm NR 7 21 24 27 LPM, VCC =0.7V, Pout=1.5dBm NR 7 16 20 24 PAE HPM, VCC = 4.2V, Pout = Pmax NR 7 10 16.5 % Current Consumption HPM, VCC = 4.2V, Pout = Pmax NR 7 550 775 mA LPM, VCC ≤ 0.7V, Pout = 1.5dBm NR 7 85 170 EUTRA ACLR HPM, VCC = 4.2V, Pout ≤ Pmax NR 8 -40 -33 dBc EUTRA ACLR HPM, VCC = 4.2V Pout = Pout ≤ Pmax -0.5 dB NR 8 CA (100+60 MHz) -36 -33 EVM HPM, VCC = 4.2V, Pout ≤ Pmax NR 9 1.4 2.1 % EVM (Secondary) HPM, VCC = 4.2V Pout = Pout ≤ Pmax -0.5 dB NR 9 CA (100+60 MHz) 1.8 2.1

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 23 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G TDD LTE Band 41 (38) Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 38 2570 2620 MHz Band 41 2496 2690 Maximum Linear Output Power (Power Class 3) ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 Maximum Linear Output Power (Power Class 2) ET Mode 28 HPM, VCC = 4.2V 27 dBm HPM, VCC = 4.2V, VBATT=3.8V, Temp = -20°C to +85°C 26 Gain HPM, VCC = 3.8V, Power Class 3 26.5 29 32 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C, Power Class 3 23.5 28 33 HPM, VCC = 4.2V, Power Class 2 26 29 32 HPM, VCC = 4.2V, VBATT=3.8V, Temp = -20°C to +85°C, Power Class 2 23 28 33 LPM, VCC =1.2V, Pout=11.5dBm 21 24 27 LPM, VCC =0.7, Pout=1.5dBm 16 20 24 EUTRA - ACLR HPM, Pout ≤ Pmax -40 -33 dBc UTRA - ACLR1 (B38) HPM, Pout ≤ Pmax -43 -36 UTRA - ACLR2 (B38) HPM, Pout ≤ Pmax -52 -39 EVM All modulations 1.7 5 % Gain transient time Gain transient time between PA modes - 10 µs PAE (Power Class 3) HPM, VCC = 3.8V, Pout = Pmax 11.5 16.5 % Quiescent Current HPM, VCC = 3.8V, No RF 125 200 mA Current Consumption (PC3) HPM, VCC = 3.8V, Pout = Pmax 600 775 mA LPM, VCC = 0.7V, Pout = 1.5dBm 80 160 LB RX Band Noise 699 – 960MHz, 40MHz QPSK 200RB -185 -170 dBm/Hz B39 RX Band Noise (1880-1920MHz) Pout ≤ Pmax with MPR 20MHz QPSK 100RB and 40MHz QPSK 200RB, both PC3 and PC2 -170 -155 -172 -157 B42 RX Band Noise 3400 – 3600MHz, 20MHz QPSK 100RB -180 -165 UL20M ISM Noise 2400 – 2462MHz, 20MHz QPSK 100RB -140 -125 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 40MHz QPSK 200RB -180 -165 GPS Band Noise 1574 – 1577MHz, 40MHz QPSK 200RB -185 -170 Harmonics 2f0 -63 -48 dBm 3f0 -66 -51 ≥4f0 -72 -57 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 24 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 41(38) RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 38 2570 2620 MHz Band 41 2496 2690 Insertion Loss Band 38, 41 3.5 4.5 dB Band 38, 41 ETC 5.2 Band 41 + 39 5.2 RX Port VSWR 2 X:1 Attenuation LB TX, 699 – 960MHz 42 57 dB B39 TX, 1880 – 1920MHz 20 35 B1 TX, 1920 – 1980MHz 15 30 B3 TX, 1710 – 1785MHz 25 40 At 2485MHz B38 OBB -7 7 ISM 2.4G, 2400 – 2467MHz 42 57 ISM 5G, 5150 -5850 MHz 57 72 Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal)

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 25 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G TDD LTE Band 41N Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range Band 41N 2535 2655 MHz Maximum Linear Output Power ET Mode 26.5 dBm HPM, VCC = 3.8V 25.5 HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 24.5 Gain HPM, VCC = 3.8V 25 27.5 31 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 22 26.5 32 LPM, VCC =1.2V, Pout=11.5dBm 22 25 28 LPM, VCC =0.7V, Pout=1.5dBm 16 20 24 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -41 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -42 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -53 -39 EVM All modulations 1.5 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 11 16 % Quiescent Current HPM, VCC = 3.8V, No RF 125 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 625 800 mA LPM, VCC = 0.7V, Pout = 1.6dBm 80 160 LB RX Band Noise 699 – 960MHz, 40MHz QPSK 200RB -183 -168 dBm/Hz B3 RX Band Noise (1805-1880MHz) Pout ≤ Pmax with MPR, 20MHz QPSK 100RB -177 -162 B1 RX Band Noise (2110-2170MHz) -180 -165 B42 RX Band Noise 3400 – 3600MHz, 20MHz QPSK 100RB -182 -167 UL20M ISM Noise 2400 – 2462MHz, 20MHz QPSK 100RB -170 -155 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 40MHz QPSK 200RB -180 -165 GPS Band Noise 1574 – 1577MHz, 40MHz QPSK 200RB -178 -163 Harmonics 2f0 -75 -60 dBm 3f0 -70 -55 ≥4f0 -72 -52

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 26 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Band 41N RX Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode. Operational Frequency Range Band 41N 2535 2655 MHz Insertion Loss Band 41N 3.7 4.7 dB Band 41N ETC 5.2 RX Port VSWR 2 X:1 Attenuation LB TX, 699 – 960MHz 48 63 dB B1 TX, 1920 – 1980MHz 48 63 B3 TX, 1710 – 1785MHz 46 61 ISM 2.4G, 2400 – 2467MHz 35 50 ISM 5G, 5150 – 5850 MHz 59 74 Cross B1 TX power to B41N RX port 1922.5 – 1977MHz, 5MHz QPSK 6RB -36 -30 dBm/5MHz Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss values are averaged across Low, Mid, High Frequencies.

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 27 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 4G LTE HB HB_TX1 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V, APT Mode, QPSK, 10MHz, 12 Resource Blocks with MPR=0 Operational Frequency Range High Band 30 2305 2315 MHz Maximum Linear Output Power HPM, VCC = 3.8V 29 dBm HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 28 Gain HPM, VCC = 3.8V 28 30.5 34 dB HPM, VCC = 3.8V, VBATT=3.8V , Temp = -20°C to +85°C 25 29.5 35 LPM, VCC =1.1V, Pout=15dBm 22 25 28 LPM, VCC =0.6V, Pout=5dBm 16 20 24 EUTRA - ACLR HPM, VCC = 3.8V, Pout ≤ Pmax -43 -33 dBc UTRA - ACLR1 HPM, VCC = 3.8V, Pout ≤ Pmax -46 -36 UTRA - ACLR2 HPM, VCC = 3.8V, Pout ≤ Pmax -53 -39 EVM All modulations 1.3 5 % Gain transient time Gain transient time between PA modes -- 10 µs PAE HPM, VCC = 3.8V, Pout = Pmax 25 30 % Quiescent Current HPM, VCC = 3.8V, No RF 125 200 mA Current Consumption HPM, VCC = 3.8V, Pout = Pmax 700 875 mA LPM, VCC = 0.6V, Pout = 5dBm 90 180 RX Band Noise 2350 – 2360MHz, HPM -128 -127 dBm/Hz LB RX Band Noise 699 – 960MHz, 40MHz QPSK 200RB -155 -140 MB RX Band Noise 1452 – 2200MHz, 40MHz QPSK 200RB -145 -130 ISM 5G Noise (except harmonics) 5150 – 5850MHz, 20MHz QPSK 100RB -157 -142 GPS Band Noise 1574 – 1577MHz, 20MHz QPSK 100RB -147 -132 Harmonics 2f0 -15 0 dBm 3f0 -24 -10 Stability, spurious output level Output Load VSWR 6:1, all phases angles, Pout = Prated Closed Loop, CW Modulation, VCC=3.4V to 4.6V, Temp = -30°C to +85°C -70 dBc

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 28 of 43 www.qorvo.com PARAMETER CONDITIONS MIN. TYP. MAX. UNITS 2G_HB_IN Electrical Specifications Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V Frequency Range DCS/PCS 1710 1990 MHz Insertion Loss DCS/PCS 0.75 1.2 dB PCS/DCS Harmonics, 2f0 and 3f0 Pin=31dBm -68 -53 dBm PARAMETER CONDITIONS MIN. TYP. MAX. UNITS TRX1, TRX2, TRX3, TRX4 Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V Frequency Range 1427 2690 MHz Insertion Loss TRX 1 1427 – 1559MHz 0.5 1.1 dB 1700 – 2200MHz 0.6 1.3 2300 – 2690MHz 0.7 1.4 Insertion Loss TRX 2 - 4 1427 – 1559MHz 0.8 1.5 dB 1700 – 2000MHz 0.8 1.6 2300 – 2690MHz 1.0 1.7 Harmonic, 2f0 Pin=26dBm -85 -70 dBm Harmonic, 3f0 Pin=26dBm -85 -70 Note: Rx port mismatch loss may be optimized with external tuning circuits Insertion loss is the average across Low, Mid, High Frequencies. (5MHz Signal) PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Bi-Directional Coupler CPL_OUT Electrical Specifications Unless otherwise stated: All unused RF ports terminated in 50Ω, Input and Output = 50Ω, Temp = 25°C, VBATT = 3.8V Frequency Range 1710 2690 MHz Coupling factor 18 22 dB Directivity 16 20 dB

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 29 of 43 www.qorvo.com Evaluation Board Circuit Schematic and Layout

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 30 of 43 www.qorvo.com Notes: 1. Pins 22, 23 and 24 are connected to secondary MIPI harness on the EVB but there is no connection inside QM77038 module.

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 31 of 43 www.qorvo.com Evaluation Board Bill of Material REFERENCE DESIGNATOR DESCRIPTION U1 QM77038 Module C1,C2,C3,C4,C60,C62 CAP, 22uF, 10%, 10V, TANT-A C5,C6,C7,C8,C61,C64 CAP, 4.7uF, 10%, 6.3V, X5R, 0805 C9,C10,C11,C12,C63,C65 CAP, 10000pF, 10%, 50V, X7R, 0603 C51,C78,C79 CAP, 1000pF, 10%, 50V, X7R, 0402 C16 CAP, 1uF, 10%, 50V, X7R, 0402 C43 CAP, 1000pF, 10%, 10V, X5R, 0201 C21 CAP, 1uF, 10%, 10V, X5R, 0201 C23,C24,C33,C41,C42,C80,C81 CAP, 100pF, 5%, 25V, C0G, 0201 R1,R24,R25,R27 RES, 0 OHM, 0603 P1 CONN, HDR, RT-ANG, 34-PIN, 0.100", T/H J1,J2,J3,J4,J5,J6,J7,J8,J9,J10,J11,J12,J13,J14,J15,J16,J17,J18,J19,J20,J21 CONN, SMA, EL FLT VIPER, MAT-21-1038 J22,J23 CONN, SMB, ST PLUG REC, T/H All others NOT POPULATED Pin Configuration and Description Top View

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 32 of 43 www.qorvo.com PIN NUMBER LABEL DESCRIPTION Multiple, see description for full list. These pins are connected to main module ground and will be grounded on the PCB for best RF performance. Backside Pad GND Ground connection. The back side of the package should be connected to the ground plane through as short of a connection as possible. PCB vias under the device are required. 4 TRX1 Auxiliary RF input / output to antenna switch - lower loss path. Not DC Blocked. 5 TRX2 Auxiliary RF input / output to antenna switch. Not DC Blocked. 7 B7 RX Band 7 receive (downlink) filter output. DC less than 5V allowed. 9 B40 RX Band 40 receive (downlink) filter output. Not DC blocked. 11 B41 RX Band 41 receive (downlink) filter output. Not DC blocked. 14 HB TX1 High band power amplifier auxiliary output from distribution switch. Not DC blocked. 16 HB VCC2 DC supply for high band power amplifier output stage. Internal capacitance 130pF. 18 HB VCC1 DC supply for high band power amplifier driver stage. Internal capacitance 40pF. 20 HB IN RF input to the high band power amplifier. Internal shunt inductor to GND. 22 NC Not connected internally, can leave open or short. 23 NC Not connected internally, can leave open or short. 24 NC Not connected internally, can leave open or short. 25 VBATT DC supply for amplifier bias circuitry. VBATT pins 25 and 26 are connected internally. 26 VBATT DC supply for amplifier bias circuitry. VBATT pins 25 and 26 are connected internally. 27 VIO Supply voltage for the MIPI RFFE serial interface bus. 28 SDATA Serial interface data I/O signal for programming the MIPI RFFE bus. 29 SCLK Serial interface clock input signal for programming the MIPI RFFE bus. 31 MB IN RF input to the mid band power amplifier. DC less than 1V allowed. 33 MB VCC1 DC supply for mid band power amplifier driver stage. Internal capacitance 25pF. 35 MB VCC2 DC supply for mid band power amplifier output stage. Internal capacitance 90pF. 36 MB TX1 Mid band power amplifier auxiliary output from distribution switch. Not DC blocked. 37 MB TX2 Mid band power amplifier auxiliary output from distribution switch. Not DC blocked. 39 B1,B4,B66 RX Band 66 (including Band 1, Band 4) receive (downlink) filter output. DC less than 5V allowed. 41 B34 RX Band 34 receive (downlink) filter output. Not DC blocked. 43 B39/B2 RX Band 39 selectable receive (downlink) filter output. Not DC blocked. 45 B3 RX Band 3 receive (downlink) filter output. DC less than 5V allowed. 47 NC Not connected internally, can leave open or short. 48 B32 RX Band 32 receive (downlink) filter output. DC less than 5V allowed. 49 2G HB IN Input port for routing 2G HB signal through the antenna switch. Not DC blocked 51 TRX3 Auxiliary RF input / output to antenna switch. Not DC Blocked. 52 TRX4 Auxiliary RF input / output to antenna switch. Not DC Blocked. 54 CPL OUT Coupler output, selectable from ANT1 or ANT2. 57 ANT1 Antenna 1 bidirectional RF port. An inductor makes this port appear as a DC short to ground. 59 ANT2 Antenna 2 bidirectional RF port. An inductor makes this port appear as a DC short to ground.

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 33 of 43 www.qorvo.com Application Circuit Schematic Notes: 1. VCC2 and VCC1 can be connected to the same source, but should be connected as close to the source as possible with separate traces using a star routing configuration. Bypass capacitors should be placed as close to the DUT as possible. 2. VBATT pins 25 and 26 are connected together internally. 3. Decoupling capacitor values for power supplies (VCC and VBATT) are suggested based on an EVB layout, and actual number and value of bypass capacitors needs to be evaluated per application. ADVANCED

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 34 of 43 www.qorvo.com MIPI RFFE Information Table 1 RFFE MIPI Control Logic Registers Register Address Data Bits Register Name QORVO Bit Field Name Default [msb:lsb] QORVO Description R/W Trigger Support 0x00 Reg00[7] PA_CTRL0 Reserved[7] 0b0 reserved R/W T0 0x00 Reg00[6:3] PA_BAND[3:0] 0b0000 PA_BAND[3:0] 0000: PA_disabled 0001: B1 0010: B3 0011: B7 0100: MB_TX1 0101: HB_TX1 0110: B39 0111: B34 1000: B40 1001: B41W 1010: B41N 1011: MB_TX2 1100: reserved 1101-1111: reserved R/W T0 0x00 Reg00[2] PA_EN[2] 0b0 PA Enable 0: PA Off 1: PA On R/W T0 0x00 Reg00[1:0] PA_MODE[1:0] 0b00 PA Mode 00: HPM 01: reserved 10: reserved 11: LPM R/W T0 0x01 Reg01[7:4] PA_CTRL1 PA_BIAS_2[3:0] 0b0000 PA Bias - power stage most significant bits R/W T0 0x01 Reg01[3:0] PA_BIAS_1[3:0] 0b0000 PA Bias - driver stage most significant bits R/W T0

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 35 of 43 www.qorvo.com Register Address Data Bits Register Name QORVO Bit Field Name Default [msb:lsb] QORVO Description R/W Trigger Support 0x2 Reg02[7:4] ASW_CTRL note - if Ant2 and Ant1 selection conflict, ANT1 routing takes effect. ASW2[3:0] 0b0000 Antenna Switch Control for ANT2 0000: off 0001: TX_IN_2G_HB 0011: B41NTRX (also connects 0100: B7TRX (also connects 0101: TRX1 0110: unused 0111: B{34|39|41W}TRX 1000: TRX4 1001: TRX2 1010: TRX3 1011: unused 1100: unused 1101-1110: reserved 1111: high_isolation R/W T1 0x02 Reg02[3:0] ASW_CTRL note - if Ant2 and Ant1 selection conflict, ANT1 routing takes effect. ASW1[3:0] 0b0000 Antenna Switch Control for ANT1 0000: off 0001: TX_IN_2G_HB 0011: B41NTRX (also connects 0100: B7TRX (also connects 0101: TRX1 0110: unused 0111: B{34|39|41W}TRX 1000: TRX4 1001: TRX2 1010: TRX3 1011: unused 1100: unused 1101-1110: reserved 1111: high_isolation R/W T1 0x03 Reg03[7:4] XSW_CTRL XSM_MB[3:0] 0b0000 Distribution Switch Control for MB 0000: off 0001: B3B4TX 0010: B1TX_B2RX 0011: B34TRX 0100: B39TRX 0101: MB_TX2 0110: MB_TX1 0111: B2RX 1000: B39RX 1001: B34RX 1010: B3TX_B2RX 1011: B34RX_B39RX 1100-1111: reserved R/W T1 0x03 Reg03[3:0] XSM_HB[3:0] 0b0000 Distribution Switch Control for HB 0000: off 0001: B40TX 0010: B41NTX 0011: B41WTX 0100: HB_TX1 0101: B40RX 0110: unused 0111: B41NRX 1000: B41WRX 1001: B41WRX+B40RX (multi-on) 1010: B41NRX+B40RX (multi-on) 1011-1111: reserved R/W T1

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 36 of 43 www.qorvo.com Register Address Data Bits Register Name QORVO Bit Field Name Default [msb:lsb] QORVO Description R/W Trigger Support 0x04 Reg04[7:3] CPL_CTRL Reserved[4:0] 0b0_0000 reserved R/W T1 0x04 Reg04[2:0] CPL[2:0] 0b000 Coupler Setting when Reg05 is 0 000: off 001: Forward ANT1 010: Reverse ANT1 011: Forward ANT2 100: Reverse ANT2 101-111: reserved Coupler Setting when Reg05 is 1 000: off 001: Forward ANT2 010: Reverse ANT2 011: Forward ANT1 100: Reverse ANT1 101-111: reserved R/W T1 0x05 Reg05[7:2] ANT_CPL_CTRL Reserved[5:0] 0b00_0000 reserved R/W T1 0x05 Reg05[1] ANT_CPL_CTRL CPL_INDEP[1] 0b0 reserved R/W T1 0x05 Reg05[0] ANT_CPL_CTRL ANT_CPL_SWAP[0] 0b0 Antenna and coupler control swapping 0: default (Ant2 controlled by Reg2[7:4], Ant1 controlled by Reg2[3:0], 1: swapped (Ant1 controlled by Reg2[7:4], Ant2 controlled by Reg2[3:0] R/W T1 0x0B Reg11[7] PACS_CTRL Reserved[7] 0b0 reserved R/W T0 0x0B Reg11[6:4] ASW_PACS[2:0] 0b000 ASW PACS setting 000 = 0.00 pF added 001 = 0.27 pF added 010 = 0.55 pF added 011 = 0.82 pF added 100 = 1.10 pF added 101 = 1.37 pF added 110 = 1.65 pF added 111 = 1.92 pF added R/W T0 0x0B Reg11[3:2] HB_XSW_PACS[1:0] 0b00 HB XSW PACS setting 00=0 pF added 01=0.35 pF added 10=0.65 pF added 11=1.00 pF added R/W T0 0x0B Reg11[1:0] MB_XSW_PACS[1:0] 0b00 MB XSW PACS setting 00=0.00 pF added 01=0.35 pF added 10=0.65 pF added 11=1.00 pF added R/W T0 0x1A Reg26[7] RFFE_STATUS SW_RESET[7] 0b0 0: Normal operation 1: Software reset (reset of all configurable registers to default values, except for USID) R/W NO 0x1A Reg26[6] CMD_FRAME_P_ERR[6] 0b0 Command sequence received with parity error – discard command. R/W NO 0x1A Reg26[5] CMD_LEN_ERR[5] 0b0 Command length error R/W NO 0x1A Reg26[4] ADDR_FRAME_P_ERR[4] 0b0 Address frame parity error R/W NO 0x1A Reg26[3] DATA_FRAME_P_ERR[3] 0b0 Data frame with parity error R/W NO 0x1A Reg26[2] READ_UNUSED_REG[2] 0b0 Read command to an invalid address R/W NO 0x1A Reg26[1] WRITE_UNUSED_REG[1] 0b0 Write command to an invalid address R/W NO

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 37 of 43 www.qorvo.com Register Address Data Bits Register Name QORVO Bit Field Name Default [msb:lsb] QORVO Description R/W Trigger Support 0x1A Reg26[0] BID_GID_ERR[0] 0b0 Read command with a Broadcast_ID or GROUP_ID R/W NO 0x1B Reg27[7:4] GROUP_ID GSID0[3:0] 0b0000 Group slave ID 0 R/W NO 0x1B Reg27[3:0] GSID1[3:0] 0b0000 Group slave ID 1 R/W NO 0x1C Reg28[7] PM_TRIG PWR_MODE[7] 0b1 0: Normal operation (ACTIVE) 1: Secondary mode (LOW POWER) R/W NO 0x1C Reg28[6] PWR_STATE[6] 0b0 0: Normal operation 1: initialization state note - this bit always reads 0. Writing a 1 to this bit forces a reset. R/W NO 0x1C Reg28[5:3] TRIGGERMASK[2:0] 0b000 Setting these bits to '1' will cause the corresponding triggers to be masked (disabled), and RFFE writes to corresponding registers will change configuration immediately (no trigger command necessary). TriggerMask[2] = TriggerMask_2, TriggerMask[1] = TriggerMask_1,&TriggerMask[0] = TriggerMask_0 Note: Qorvo does not allow for changing the trigger mask and sending triggers within the same RFFE write. R/W NO 0x1C Reg28[2:0] TRIGGER[2:0] 0b000 Setting these bits to '1' will cause the registers associated with that trigger to be loaded with the contents of its corresponding shadow register. Trigger[2] = Trigger_2, Trigger[1] = Trigger_1, and Trigger[0] = Trigger_0 Note: Qorvo does not allow for changing the trigger mask and sending triggers within the same RFFE write. R/W NO 0x1D Reg29[7:0] PRODUCT_ID PRODUCT_ID[7:0] 0b0001_0000 This is a read-only register. However, during the programming of the USID a write command sequence is performed on this register, even though the write does not change its value. R/W NO 0x1E Reg30[7:0] MAN_US_ID MANUFACTURER_ID_LSB[7:0] 0b1100_0110 This is a read-only register. However, during the programming of the USID, a write command sequence is performed on this register, even though the write does not change its value. Note: This is the lower 8 least significant bits of the RFFE's MANUFACTURER_ID (i.e. MANUFACTURER_ID[7:0] = MANUFACTURER_ID_LSB[7:0] R/W NO 0x1F Reg31[7:4] MAN_US_ID MANUFACTURER_ID_MSB[3:0] 0b0011 These bits are read-only. However, during the programming of the USID, a write command sequence is performed on this register even though the write does not change its value. Note: This is the 4 most significant bits of the RFFE's MANUFACTURER_ID (i.e. MANUFACTURER_ID[11:8] = MANUFACTURER_ID_MSB[3:0] R/W NO 0x1F Reg31[3:0] USID[3:0] 0b1110 Programmable USID. Performing a write to this register using the described programming sequences will program the USID in devices supporting this feature. These bits store the USID of the device (customer specified). R/W NO 0x20 Reg32[7:0] EXT_PRODUCT_ID EXT_PRODUCT_ID[7:0] 0b0000_0000 This is a read-only register. However, during the programming of the USID a write command R/W NO

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 38 of 43 www.qorvo.com Register Address Data Bits Register Name QORVO Bit Field Name Default [msb:lsb] QORVO Description R/W Trigger Support sequence is performed on this register, even though the write does not change its value. 0x21 Reg33[7:0] REVISION_ID REVISION_ID[7:0] 0b0000_0000 This is an RFFE2 register to contain information about the revision of this module. The intent here is to use this as a type of scratch register - - to contain various information or serialization. R/W NO 0x22 Reg34[7:4] GROUP_ID2 GSID0_2[3:0] 0b0000 Group slave ID 0 There is only 1 register for GSID0&GSID1, but this register can be accessed from either Reg27 or Reg34. This means that write to Reg34 will reflect in Reg27 also, and vice versa R/W NO 0x22 Reg34[3:0] GSID1_2[3:0] 0b0000 Group slave ID 1 There is only 1 register for GSID0;GSID1, but this register can be accessed from either Reg27 or Reg34. This means that write to Reg34 will reflect in Reg27 also, and vice versa R/W NO 0x23 Reg35[7] UDR_RST (RFFE_STATUS2) SW_RESET_2[7] 0b0 0: Normal operation 1: Software reset (reset of all configurable registers to default values, except for USID) There is only 1 register for RFFE_STATUS, but this register can be accessed from either Reg26 or Reg35. This means that write to Reg35 will reflect in Reg27 also, and vice versa R/W NO 0x23 Reg35[6:0] Reserved[6:0] 0b000_0000 Reserved R/W NO 0x24 Reg36[7] ERR_SUM (RFFE_STATUS3) Reserved[7] 0b0 Reserved R/W NO 0x24 Reg36[6] CMD_FRAME_P_ERR_2[6] 0b0 Command sequence received with parity error – discard command. R/W NO 0x24 Reg36[5] CMD_LEN_ERR_2[5] 0b0 Command length error R/W NO 0x24 Reg36[4] ADDR_FRAME_P_ERR_2[4] 0b0 Address frame parity error R/W NO 0x24 Reg36[3] DATA_FRAME_P_ERR_2[3] 0b0 Data frame with parity error R/W NO 0x24 Reg36[2] READ_UNUSED_REG_2[2] 0b0 Read command to an invalid address R/W NO 0x24 Reg36[1] WRITE_UNUSED_REG_2[1] 0b0 Write command to an invalid address R/W NO 0x24 Reg36[0] BID_GID_ERR_2[0] 0b0 Read command with a Broadcast_ID or GROUP_ID R/W NO 0x2B Reg43[7:4] BUS_LOAD Reserved[3:0] 0b0000 Reserved R/W No 0x2B Reg43[3:0] BUS_LOAD[3:0] 0b0100 SDATA Driver strength in Readback Mode 0x0: 10pf 0x1: 20pf 0x2: 30pf 0x3: 40pf 0x4: 50pf 0x5: 60pf 0x6: 80pf 0x7: 100pf 0x8: 120pf 0x9: 140pf 0xA: 160pf 0xB: 180pf 0xC: 200pf 0xD: 250pf 0xE-0xF: reserved R/W No 0x2C Reg44[7:0] TEST_PATTERN Test Pattern[7:0] 0b1101_0010 A read of this register returns the test pattern R No

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 39 of 43 www.qorvo.com Turn On Information PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Turn On Time, "Cold Start" (10,11) Initial: PM_TRIG[PWR_MODE] = 1 (LOW POWER). All registers are configured for measured path and triggered. Stimulus: PM_TRIG[PWR_MODE] = 0 (ACTIVE). Response: Output power within 1dB of final Pout. - 7.5 - µs Turn On Time, Antenna Switch(10,11) Initial: Antenna switch is Off - 2.3 - µs Stimulus: Antenna switch is configured for measured path Response: Output power within 1dB of final Turn Off Time, Antenna Switch(10,11) Initial: Antenna switch is configured for measured path - 2 - µs Stimulus: Antenna switch is configured Off Response: Output power decrease of 20dB Port to Port Switching Time, Antenna Switch(10,11) Initial: Antenna switch is configured for first port - 2.3 - µs Stimulus: Antenna switch is configured for second port Response: Output power within 1dB of final Turn On Time, MB or HB Amplifier(10) Initial: Tx path configured On (all register values except PA_EN) - 3.6 - µs Stimulus: PA_EN = 0 to 1 Response: Output power within 1dB of final Turn Off Time, MB or HB Amplifier(10) Initial: Tx path configured On - 0.5 - µs Stimulus: PA_EN = 1 to 0 Response: Output power decrease of 20dB Gain Switching Time(10) Initial: MB or HB amplifier and switch path configured for first power mode - 0.5 - µs Stimulus: MB or HB amplifier configured for second power mode (PA_MODE and/or bias register change) Response: Output power within 1dB of final 10. Initial conditions are applied to the device under test. An RF input signal with constant average power (-20dBm for PA inputs and 0dBm for others) is applied at the appropriate input port. Output power is monitored at the appropriate output port. The Stimulus condition is applied. Time between the Stimulus and the Response condition is measured. When the Stimulus is a MIPI RFFE register write, the reference is from the end of the RFFE write, defined by the SCLK transition “high” at Bus Park. For accurate measurements when multiple registers are included in the stimulus, triggered operation is used and the reference is the end of the RFFE write that triggers the registers. 11. Applies to all mid band or high band PA paths and Tx or Rx paths through the ANT port(s).

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 40 of 43 www.qorvo.com Mechanical Information Package Marking and Dimensions Marking: Part number – QM77038

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 41 of 43 www.qorvo.com PCB Design Guidelines PCB Metal Land and Solder Mask Pattern Notes: 1. All dimensions are in microns. Angles are in degrees. 2. Dimension and tolerance formats conform to ASME Y14.4M -1994. 3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 42 of 43 www.qorvo.com Handling Precautions PARAMETER RATING STANDARD ESD – Human Body Model (HBM) Class 1C – all pins except 7, 39, 45. ESDA/JEDEC JS-001-2012 Class 1B – pins 7, 39, 45 ESD – Charged Device Model (CDM) Class C3 JEDEC JESD22-C101F MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Solderability Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes. Package lead plating: Electrolytic plated Au over Ni RoHS Compliance This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment), as amended by Directive 2015/863/EU. This product also has the following attributes:

Lead free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo m akes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change w ithout notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life -saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc . Pb

Linear Multi-Mode Mid and High Band S-PAD Data Sheet 20200415 | Subject to change without notice 43 of 43 www.qorvo.com

REVISION HISTORY

09/26/2019 Added Limits (Rx Noise) 01/13/2020 Added IL ETC and Limits, B39 2fo limit changed from -60 to -40 dBm max, B39 2.4G Rejection Limit changed from 45 to 40 dB min, B32 5G BW changed from 5150 to 4905, limit changed from 57 to 47 dB min. 01/16/2020 Increase n3 max gain window from 33 to 33.4 dB and B7 max gain window from 32 to 33.8dB. 03/27/2020 Added n40 04/02/2020 Changed n1 Modulation from 20 to 50MHz, Added new band n40, Added CA100+60 MHz to n41. 04/15/2020 Added limits for 5G Changes, n1,n40,n41.

Product Information

QM77038 specifications and overview.

Summary

Linear Multi-Mode Mid and High Band S-PAD

Description

Linear Multi-Mode Mid and High Band S-PAD

Source title QM77038 Datasheet(PDF) - Qorvo, Inc

Related Parts

More parts from the same family.

Browse manufacturer