QM25032 QORVO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 19
Technical content
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 1 of 19 www.qorvo.com ADVANCED Functional Block Diagram Bottom View 6 Pin 2.5 x 2.0 x 0.54mm leadless SMT package Key Features • Compact Form-Factor: 2.5mm x 2.0mm x 0.6mm • Minimizes PA current drain with excellent TX IL • Improved RX sensitivity with low RX IL • Single-Ended • RoHS Compliant, Pb-Free Module Package Applications • LTE/NR Mobile Products o Handsets o Datacards • Carrier Aggregation
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 2 of 19 www.qorvo.com Absolute Maximum Ratings Parameter Conditions Rating Storage Temperature -40 to +85°C RF Input Power (Pin1, Pin2) CW +55°C for 5k hours +31 dBm FDD_UL_CP-OFDM_QPSK_5M_1RB@23 +29.5 dBm FDD_UL_CP-OFDM_QPSK_5M_1RB@24 +28 dBm Peak RF Input Power (Pin 1, Pin2) CW, Max duration 500 ms +34.5 dBm Operation of this device outside the parameter ranges given above may cause permanent damage.
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 3 of 19 www.qorvo.com Attenuation 1495.9 – 1510.9 MHz 45 58 - dB 1559 – 1680 MHz 45 58 - 1805 – 1880 MHz 48 60 - 2010 – 2025 MHz 15(3) 20 - 2110 – 2170 MHz 50 69 - 2400 – 2500 MHz 45 61 - 3640 – 3960 MHz 40 59 - 4900 – 5180 MHz 30 53 - 5180 – 5900 MHz 12 22 - Notes: 1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic 2. Typical specified as mathematical average over frequency range at room temp 3. Operating Temp = +15 °C to +85 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 4 of 19 www.qorvo.com Attenuation 1447 – 1463 MHz 40 48 - dB 1710 – 1785 MHz 48 54 - 1920 – 1980 MHz 49 56 - 2400 – 2500 MHz 50 62 - 4900 – 5180 MHz 30 53 - 5180 – 5900 MHz 25 53 - Notes: 1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic 2. Typical specified as mathematical average over frequency range at room temp
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 5 of 19 www.qorvo.com Attenuation 1559 – 1605 MHz 40 49 - dB 1805 – 1880 MHz 47(4) 60 - 2110 – 2170 MHz 50 62 - 2400 – 2500 MHz 42 46 - 3420 – 3570 MHz 25 39 - 4900 – 5180 MHz 18 31 - 5180 – 5900 MHz 18 25 - Notes: 1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic 2. Typical specified as mathematical average over frequency range at room temp 3. Operating Temp = −30 °C to +25 °C 4. Operating Temp = +25 °C to +85 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 6 of 19 www.qorvo.com Attenuation 1710 – 1785 MHz 40 57 - dB 1920 – 1980 MHz 48 53 - 2400 – 2500 MHz 40 52 - 4900 – 5180 MHz 40 51 - 5180 – 5900 MHz 30 54 - Notes: 1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic 2. Typical specified as mathematical average over frequency range at room temp 3. Operating Temp = +25 °C to +85 °C Electrical Specifications(1) Isolation Unless Otherwise Noted: Operating Temp = −30 °C to +85 °C Parameter Conditions Min. Typ. Max. Units B3 TX-RX Isolation in B3 RX 1805 – 1880 MHz 55(2) 62 - dB B3 TX-RX Isolation in B3 TX 1710 – 1785 MHz 55 59 - B1 TX-RX Isolation in B1 RX 2110 – 2170 MHz 55 69 - B1 TX-RX Isolation in B1 TX 1920 – 1980 MHz 50 59 - B1 TX to B3 RX Isolation in B3 RX 1805 – 1880 MHz 55 61 - B1 TX to B3 RX Isolation in B1 TX 1920 – 1980 MHz 52 55 - B3 TX to B1 RX Isolation in B3 TX 1710 – 1785 MHz 53 57 - B3 TX to B1 RX Isolation in B1 RX 2110 – 2170 MHz 55 64 - Notes: 1. All specifications include expected temperature, process guardbands, and are based on application circuit schematic 2. Integrated over 5MHz Bandwidth
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 7 of 19 www.qorvo.com Application Circuit Schematic Note: B1 TX (pin 1) and B3 TX (pin 2) are terminated with complex impedance to provide flexible matching options for optimizing TX performance between PA and QM25032. All other ports are matched to 50 ohm impedance Bill of Materials Ref. Des. Value Description Manuf. Part number U1 N/A Band 1/3 Multiplexer Qorvo QM25032 PCB N/A 4-layer Printed Circuit Board
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 8 of 19 www.qorvo.com Performance Plots – Passband Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 9 of 19 www.qorvo.com Performance Plots – Narrowband Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 10 of 19 www.qorvo.com Performance Plots – Wideband Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 11 of 19 www.qorvo.com Performance Plots – ANT Port Return Loss/Impedance Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 12 of 19 www.qorvo.com Performance Plots – TX & RX Return Loss/Impedance Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 13 of 19 www.qorvo.com Performance Plots – Isolation Test conditions unless otherwise noted: Temp. = +25 °C
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 14 of 19 www.qorvo.com Pin Configuration and Description Bottom View Pin Number Label Description 1 B1 TX Band 1 Transmit Port 2 B3 TX Band 3 Transmit Port 3 ANT Band 1/3 Antenna Port 4 B1 RX Band 1 Receive Port 5 B3 RX Band 3 Receive Port 6 GND Package Ground ADVANCED
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 15 of 19 www.qorvo.com Package Marking and Dimensions Package Marking Diagram Package Outline Dimension Drawing
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 16 of 19 www.qorvo.com Mechanical Information Pin Dimensions - Bottom View Recommended Solder Stencil– Top View Recommended Land Pattern – Top View Recommended Land Pattern Mask – Top View
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 17 of 19 www.qorvo.com Tape and Reel Information – Carrier and Cover tape Dimensions Feature Measure Symbol Size (mm) Flange Diameter D1 330.0 Thickness W2 14.2 Space Between Flange W1 8.8 Hub Outer Diameter D2 102.0 Arbor Hole Diameter D3 13.0 Key Slit Width B 2.0 Key Slit Diameter D4 20.2 Feature Measure Symbol Size (mm) Cavity (Unless otherwise specified, all dimension tolerances per EIA-481) ADVANCED
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 18 of 19 www.qorvo.com Handling Precautions PARAMETER RATING STANDARD Caution! ESD sensitive device ESD – Human Body Model (HBM) 1C ESDA/JEDEC JS-001 ESD – Charged Device Model (CDM) C3 ESDA/JEDEC JS-002 MSL – Moisture Sensitivity Level MSL3 IPC/JEDEC J-STD-020 Solderability Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes. Package lead plating: Electrolytic plated Au over Ni RoHS Compliance This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment), as amended by Directive 2015/863/EU. This product also has the following attributes: • Lead free • Halogen Free (Chlorine, Bromine) • Antimony Free • TBBP-A (C15H12Br402) Free • SVHC Free Pb
QM25032 Band 1/3 Multiplexer QM25032 Data Sheet rev G Subject to change without notice 19 of 19 www.qorvo.com Revision History REVISION DATE (YYYYMMDD) NOTES E 20200219 Initial Production Release F 20210222 Updated Power Ratings Specs G 20210318 Updated Power Ratings Specs Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com