QM12038 QORVO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 1 of 12 www.qorvo.com

Ordering Information

PART NO. DESCRIPTION QM12038SB 5-pc Sample Bag QM12038SR 100-pc, 7” Reel QM12038TR13-5K 5000-pc, 13” Reel QM12038PCK410 Fully Assembled EVB and 5-pc Sample Bag Product Description The QM12038 is a low loss, high isolation SP8T switch with performance optimized for CDMA, WCDMA & LTE applications requiring high linearity. The QM12038 is compatible with +1.3V control logic, which is a key requirement for most cellular transceivers. This part is packaged in a compact 2mm x 2mm, 15-pin, Module package which allows for a small solution size with no need for external DC blocking capacitors (when no external DC is applied to the device ports). Functional Block Diagram Top View 15 Pin 2 x 2 x 0.57 mm Module Package Feature Overview

  • Excellent insertion loss and isolation performance o 0.5dB Typ IL, Band 5 o 40dB Typ Isolation, Band 5
  • Multi-Band operation 700MHz to 2700MHz
  • GPIO compatible to 1.8V typ (1.3V min)
  • Power handling +32dBm, 50Ω
  • Compact 2mm x 2mm, Module package
  • No DC blocking capacitors required (unless external DC is applied to the RF ports)

Applications

  • Cellular Handset Applications
  • Cellular Modems and USB Devices
  • Multi-Mode WCDMA, and LTE Applications

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 2 of 12 www.qorvo.com Absolute Maximum Ratings Operation of this device outside the parameter ranges given above may cause permanent damage. Recommended Operating Conditions * VDD Must be > VCTL at all times Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. PARAMETER RATING Storage Temperature -45 to +125 °C Operating Temperature -30 to +90°C VDD 6.0 V CTL1, CTL2, CTL3 3.0 V Maximum Input Power Momentary Infrequent Occurrence 35 dBm, 1:1 VSWR 33 dBm, 6:1 VSWR Continuous Operation 32 dBm, 1:1 VSWR 30 dBm, 6:1 VSWR PARAMETER MIN. TYP. MAX. UNITS VDD Supply Voltage 2.4 2.85 4.5 V VDD Supply Current 80 120 µA CTL Logic Low Voltage 0.00 0.00 0.45 V CTL Logic High Voltage 1.3 1.8 2.7* V CTL Logic High Current 0.1 5 µA Turn-On Time 4 µs Switching Speed 2 µs

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 3 of 12 www.qorvo.com Electrical Specifications Test conditions unless otherwise stated: all unused RF ports terminated in 50Ω, Input and Output = 50Ω, T = 25°C, VDD = 2.85V, VHIGH/VLOW = 1.8V/0V PARAMETER CONDITIONS MIN. TYP. MAX. UNITS Insertion Loss RFx to RFC 698MHz to 960MHz 0.52 dB RFx to RFC 1710MHz to 1980MHz 0.68 dB RFx to RFC 2110MHz to 2170MHz 0.71 dB RFx to RFC 2300MHz to 2690MHz 0.85 dB Harmonics Low Band, 2fo Pin = +28dBm, 50Ω, fo= 824MHz -98 dBc Low Band, 3fo Pin = +28dBm, 50Ω, fo= 824MHz -84 dBc Mid Band, 2fo Pin = +28dBm, 50Ω, fo= 1980MHz -98 dBc Mid Band, 3fo Pin = +28dBm, 50Ω, fo= 1980MHz -84 dBc High Band, 2fo Pin = +28dBm, 50Ω, fo= 2570MHz -97 dBc High Band, 3fo Pin = +28dBm, 50Ω, fo= 2570MHz -80 dBc IIP2 Low Band TX Carrier @ 897.5MHz at +21dBm CW Blocker @ 1840 MHz at -15dBm Measured RX frequency @ 942.5MHz 117 dBm High Band TX Carrier @ 1880MHz at +21dBm CW Blocker @ 3840 MHz at -15dBm Measured RX frequency @ 1960MHz 118 dBm IIP3 Low Band TX Carrier @ 897.5MHz at +21dBm CW Blocker @ 852.5MHz at -15dBm Measured RX frequency @ 942.5MHz 68 dBm High Band TX Carrier @ 1880MHz at +21dBm CW Blocker @ 1800MHz at -15dBm Measured RX frequency @ 1960MHz 67 dBm VSWR 698MHz to 2690MHz 1.1 :1

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 4 of 12 www.qorvo.com Isolation Matrix Low Band (698MHz – 960MHz) STATE INSERTION PORT ISOLATION, TYPICAL (dB) RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 RF1 RF1 42 32 44 43 45 44 41 RF2 RF2 42 43 32 45 42 41 44 RF3 RF3 32 43 45 34 46 42 42 RF4 RF4 44 32 45 46 33 42 42 RF5 RF5 43 45 34 46 47 40 43 RF6 RF6 45 42 46 33 47 43 40 RF7 RF7 44 41 42 42 40 43 43 RF8 RF8 41 44 42 42 43 40 43 RF1 RFC 43 42 41 41 41 34 33 RF2 RFC 42 42 41 41 41 34 33 RF3 RFC 42 43 41 41 41 34 33 RF4 RFC 42 43 42 41 41 34 33 RF5 RFC 42 43 42 41 41 34 33 RF6 RFC 42 43 42 41 41 34 33 RF7 RFC 42 43 42 41 41 41 33 RF8 RFC 42 43 42 41 41 41 34 Isolation Matrix Mid Band (1710MHz – 2170MHz) STATE INSERTION PORT ISOLATION, TYPICAL (dB) RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 RF1 RF1 30 23 31 31 33 33 31 RF2 RF2 30 31 23 33 31 31 33 RF3 RF3 23 31 32 24 30 32 31 RF4 RF4 31 23 32 34 24 31 32 RF5 RF5 31 33 24 34 34 29 32 RF6 RF6 33 31 30 24 34 32 29 RF7 RF7 33 31 32 31 29 32 32 RF8 RF8 31 33 31 32 32 29 32 RF1 RFC 33 32 32 32 31 25 25 RF2 RFC 31 32 32 32 31 25 25 RF3 RFC 31 33 32 32 31 25 25 RF4 RFC 31 33 32 32 31 25 25 RF5 RFC 31 33 32 32 31 25 25 RF6 RFC 31 33 32 32 32 25 25 RF7 RFC 31 33 32 32 32 31 25 RF8 RFC 31 33 32 32 32 31 25

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 5 of 12 www.qorvo.com Isolation Matrix High Band (2300MHz – 2690MHz) STATE INSERTION PORT ISOLATION, TYPICAL (dB) RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 RF1 RF1 28 21 29 28 29 31 29 RF2 RF2 28 28 21 30 28 28 31 RF3 RF3 21 28 30 22 30 30 29 RF4 RF4 29 21 30 30 22 29 30 RF5 RF5 28 30 22 30 31 26 30 RF6 RF6 29 28 30 22 31 30 26 RF7 RF7 31 28 30 29 26 30 29 RF8 RF8 29 31 29 30 30 26 29 RF1 RFC 30 29 28 29 29 21 21 RF2 RFC 30 29 28 29 29 21 21 RF3 RFC 30 30 28 29 29 21 21 RF4 RFC 30 30 29 29 29 21 21 RF5 RFC 30 30 29 28 29 21 21 RF6 RFC 30 30 29 28 29 21 21 RF7 RFC 30 30 29 28 29 29 21 RF8 RFC 30 30 29 28 29 29 21

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 6 of 12 www.qorvo.com Application Circuit Schematic

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 7 of 12 www.qorvo.com Pin Configuration and Description RF5 RF3 RF1 VDD RF6 RF4 RF2 NC RF8 RFC RF7 14 13 12 5 6 7 GND CTL1 CTL2 CTL3 Top View PIN NO. LABEL DESCRIPTION

1 RF5 RF Input / Output

2 RF3 RF Input / Output

3 RF1 RF Input / Output

4 VDD Power Supply

5 CTL3 Control Logic #3

6 CTL2 Control Logic #2

7 CTL1 Control Logic #1

8 NC No Connect

9 RF2 RF Input / Output

10 RF4 RF Input / Output

11 RF6 RF Input / Output

12 RF8 RF Input / Output

13 RFC RF Common Input / Output

14 RF7 RF Input / Output

15 GND RF and DC Ground

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 8 of 12 www.qorvo.com Control Logic The Switch is controlled by CTL1, CTL2, and CTL3. LOGIC STATE CTL1 CTL2 CTL3 RF1-RFC Low Low High RF2-RFC Low Low Low RF3-RFC High High Low RF4-RFC High High High RF5-RFC Low High Low RF6-RFC Low High High RF7-RFC High Low Low RF8-RFC High Low High Power On and Off Sequence It is very important that the user adheres to the correct power-on/off sequence in order to avoid damaging the part. First apply VDD before applying a high to CTL1, CTL2, or CTL3. Power On – 1. Apply voltage supply – VDD 2. Apply Logic signal – CTL1, CTL2, CTL3 3. Apply the RF signal Power Off – 1. Remove the RF signal 2. Remove the logic signal – – CTL1, CTL2, CTL3 3. Remove the voltage supply – VDD VDD RF Signal RF OFF VDD OFFRF ON CTL set CTL1, CTL2 & CTL3 CTL set RF ON

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 9 of 12 www.qorvo.com Mechanical Information Package Drawing Top View Side View Top View X-Ray

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 10 of 12 www.qorvo.com PCB Design Requirements Notes: 1. All dimensions are in milimeters. Angles are in degrees. 2. Dimension and tolerance formats conform to ASME Y14.4M -1994. 3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012. Recommended Land Pattern Recommended Land Pattern Mask

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 11 of 12 www.qorvo.com Handling Precautions PARAMETER RATING STANDARD Caution! ESD sensitive device ESD – Human Body Model (HBM) Class 2 ESDA/JEDEC JS-001-2012 MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Solderability Compatible with both lead-free (260 °C max. reflow temperature) and tin/lead (245 °C max. reflow temperature) soldering processes. Package lead plating: Electrolytic plated Au over Ni RoHS Compliance This part is compliant with the 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment), as amended by Directive 2015/863/EU. This product also has the following attributes:

  • Lead free
  • Halogen Free (Chlorine, Bromine)
  • Antimony Free
  • TBBP-A (C15H12Br402) Free
  • SVHC Free Pb

SP8T Switch For 3G/4G Applications QM12038 DS Rev. D | Subject to change without notice 12 of 12 www.qorvo.com

Revision History

Revision Code Date Comments B 03/01/2018 Initial Production Release C 02/19/2020 Added Not Recommended For New Designs marks D 06/15/2020 Removing NRND Marks Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable. Qoro makes no warranties regarding the information contained her ein. Qorvo assumes no responsibility or liability whatsoever for any of the information contained herein. Qorvo assumes no responsi bility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. Qorvo products are not warranted or authorized for use as critic al components in medical, life -saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2016 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.