PEX8548 PLX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

ƒ PEX 8548 General Features o 48-lane PCI Express switch - Integrated SerDes o Up to nine configurable ports o 37.5mm x 37.5mm, 736-ball PBGA package o Typical Power: 4.9 Watts ƒ PEX 8548 Key Features o Standard Compliant - PCI Express Base Specification, r1.1 o High Performance - Non-blocking switch fabric - Full line rate on all ports - Packet Cut-Thru with 110ns max packet latency (x16 to x16) o Flexible Configuration - Nine highly flexible & configurable ports (x1, x2, x4, x8, or x16) - Configurable with strapping pins, EEPROM, I2C, or Host software - Lane and polarity reversal o PCI Express Power Management - Link power management states: L0, L0s, L1, L2/L3 Ready, and L3 - Device states: D0 and D3hot o Quality of Service (QoS) - One Virtual Channel per port - Eight Traffic Classes per port - Weighted Round-Robin Ingress Port Arbitration o Reliability, Availability, Serviceability - 3 Standard Hot-Plug Controllers - Upstream port as hot-plug client - Transaction Layer end-to-end CRC - Poison bit - INTA# interrupt signal - Fatal Error (FATAL_ERR#) signal (legacy SERR equivalent) - PCIe baseline error reporting - Advanced Error Reporting - Port Status bits and GPO available - Per port error diagnostics

  • Bad DLLPs
  • Bad TLPs
  • CRC errors - JTAG boundary scan Multi-purpose, High Performance ExpressLane™ Switch The ExpressLane PEX 8548 device offers PCI Express switching capability enabling users to add scalable high bandwidth, non-blocking interconnection to a wide variety of applications including servers, storage systems, communications platforms, blade servers, and embedded-control products. The PEX 8548 is well suited for fan-out, aggregation, dual- graphics, peer-to-peer, and fabric backplane applications. Highly Flexible Port Configurations The PEX 8548 offers highly configurable ports. There are a maximum of 9 ports that can be configured to any legal width from x1 to x16, in any combination to support your specific bandwidth needs. The ports can be configured for symmetric (each port having the same lane width and traffic load) or asymmetric (ports having different lane widths) traffic. In the event of asymmetric traffic, the PEX 8548 features a flexible central packet memory that allocates a memory buffer for each port as required by the application or endpoint. This buffer allocation along with the device's flexible packet flow control minimizes bottlenecks when the upstream and aggregated downstream bandwidths do not match (are asymmetric). Any of the ports can be designated as the upstream port, which can be changed dynamically. High Performance The PEX 8548 architecture supports packet cut-thru with a max latency of 110ns (x16 to x16). This, combined with large packet memory (1024 byte maximum payload size) and non-blocking internal switch architecture, provide full line rate on all ports for performance-hungry applications such as storage servers or storage switch fabrics. End-to-end Packet Integrity The PEX 8548 provides end-to-end CRC protection (ECRC) and Poison bit support to enable designs that require end-to-end data integrity. These features are optional in the PCI Express specification, but PLX provides them across its entire ExpressLane switch product line. Configuration Flexibility The PEX 8548 provides several ways to configure its operations. The device can be configured through strapping pins, I2C interface, CPU configuration cycles, or an optional serial EEPROM. This allows for easy debug during the development phase, performance monitoring during the operation phase, and driver or software upgrade. Interoperability The PEX 8548 is designed to be fully compliant with the PCI Express Base Specification r1.1. Additionally, it supports auto-negotiation, lane reversal, and polarity reversal. The PEX 8548 also undergoes thorough interoperability testing in PLX’s Interoperability Lab. PEX 8548 Version 1.5 2007

endpoints requiring smaller links. applications such as switch fabrics and backplanes. Figure 3. Peer-to-Peer/Backplane Usage optimal for High resolution 3D graphics applications. each other for maximum performance. Figure 4. Dual Graphics Fan-out Transparent Bridging function.

14 CPU Blades

2 I/O Blades

Figure 5. Blade Server the two PEX 8548 devices is x8 lanes wide.

or Message Signaled Interrupts (MSI) when enabled. and advanced error reporting. documentation, and a Software Development Kit (SDK). Figure 6. PEX 8548 RDK Please visit the PLX Web site at http://www.plxtech.com or contact PLX sales at 408-774-9060 for sampling. responsibility for any errors that may appear in this material. PLX Technology, Inc. reserves the right, without notice, to make changes in product design or specification.