P0130AA KERSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

0.8A SCRs MAIN FEATURES:

DESCRIPTION

The P0130AA is a gate sensitive SCR, packaged in TO-92, used in conjunction of a TN22 A.S.D™ and of a resistor in electronic starter for fluores- cent tubelamps. Symbol Value Unit I T(RMS) 0.8 A V DRM RRM 100 V I GT 1 µA ABSOLUTE RATINGS (limiting values) Symbol Parameter Value Unit I T(RMS) RMS on-state current (180° conduction angle) Tl = 55°C 0.8 A IT (AV) Average on-state current (180° conduction angle) Tl = 55°C 0.5 A I TSM Non repetitive surge peak on-state current tp = 8.3 ms Tj = 25°C A tp = 10 ms 7 I tI t Value for fusing tp = 10ms Tj = 25°C 0.24 A S dI/dt Critical rate of rise of on-state current I G = 2 x I GT , tr ≤ 100 ns F = 60 Hz Tj = 125°C 50 A/µs I GM Peak gate current tp = 20 µs Tj = 125°C 1 A P G(AV) Average gate power dissipation Tj = 125°C 0.1 W T stg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 °C A K G TO-92 www.kersemi.com

ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise specified) THERMAL RESISTANCES PRODUCT SELECTOR Symbol Test Conditions P0130AA Unit I GT V D = 12 V R L = 140 Ω MIN. 0.1 µAMAX. 1 V GT MAX. 0.8 V V GD V D = V DRM R L = 3.3 kΩ R GK = 1 kΩ Tj = 125°C MIN. 0.1 V V RG I RG = 10 µA MIN. 8V I H I T = 50 mA R GK = 1 kΩ MAX. 5 mA I L I G = 1 mA R GK = 1 kΩ MAX. 6 mA dV/dt V D = 67 % V DRM R GK = 1 kΩ Tj = 125°C MIN. 25 V/µs V TM I TM = 1.6 A tp = 380 µs Tj = 25°C MAX. 1.95 V V Threshold voltage Tj = 125°C MAX. 0.95 V R d Dynamic resistance Tj = 125°C MAX. 600 m Ω I DRM I RRM V DRM = V RRM R GK = 1 kΩ Tj = 25°C MAX. 1 µA Tj = 125°C MAX. 100 Symbol Parameter Value Unit R th(j-i) Junction to case (DC) 80 °C/W R th(j-a) Junction to ambient (DC) 150 °C/W Part Number Voltage Sensitivity Package P0130AA 100V 1 µA TO-92 www.kersemi.com

ORDERING INFORMATION

Note: xx = sensitivity, y = voltage Part Number Marking Weight Base Quantity Packing mode P0130AA 1EA3 P0130AA 0.2 g 2500 Bulk P0130AA 2AL3 P0130AA 0.2 g 2000 Ammopack Fig. 1: Maximum average power dissipation versus average on-state current. Fig. 2-1: Average and D.C. on-state current versus lead temperature. Fig. 2-2: Average and D.C. on-state current versus ambient temperature. Fig. 3: Relative variation of thermal impedance junction to ambient versus pulse duration. P 01 30 A A 1EA3 SENSITIVE SCR SERIES CURRENT: 0.8A SENSITIVITY: 30: 1µA VOLTAGE: A: 100V PACKAGE: A: TO-92 PACKING MODE: 1EA3: TO-92 bulk 2AL3: TO-92 ammopack Blank P(W) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 IT(av)(A) Tlead or Ttab (°C) 1.1 1.0 0.9 0.7 0.8 0.5 0.6 0.1 0.4 0.3 0.2 0.0 02 5 5 0 75 100 125 IT(av)(A) 1.2 1.1 1.0 0.8 0.9 0.6 0.7 0.2 0.5 0.4 0.3 0.1 02 5 5 0 75 100 125 0.0 Tamb(°C) K = [Zth(j-a)/Rth(j-a)] tp(s) 1.00 0.10 0.01 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 www.kersemi.com

Fig. 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values). Fig. 5:Relative variation of holding current versus gate-cathode resistance (typical values). Fig. 6: Relative variation of dV/dt immunity versus gate-cathode resistance (typical values). Fig. 7: Relative variation of dV/dt immunity versus gate-cathode capacitance (typical values). Fig. 8: Surge peak on-state current versus number of cycles. Fig. 9: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms, and corresponding value of I²t. IGT, IH, IL[Tj] / IGT, IH, IL[T] = 25°C 0-20-40 20 40 60 80 100 120 140 Tj(°C) IH[Rgk]/IH[Rgk=1k ]Ω Rgk(kΩ) dV/dt[Rgk] / dV/dt[Rgk=1k ]Ω Rgk(kΩ) 00.1 1.0 10.0 dV/dt[Cgk] / dV/dt[Rgk=1k ]Ω 2103 4 5 6 7 Cgk(nF) 1 10 100 1000 ITSM(A) Non repetitive Tj initial=25°C Tamb=25°C Repetitiv e Numberofcycles Onecycle tp=10ms ITSM(A), I t(A s) 100.0 10.0 1.0 0.1 0.01 0.10 1.00 10.00 tp(ms) www.kersemi.com

Fig. 10: On-state characteristics (maximum values). Ω ITM(A) 1E+1 1E+0 1E-1 1E-2 VTM(V) PACKAGE MECHANICAL DATA TO-92 (Plastic) DF a E B A C REF. DIMENSIONS Millimeters Inches A 1.35 0.053 B 4.70 0.185 C 2.54 0.100 D 4.40 0.173 E 12.70 0.500 F 3.70 0.146 a 0.50 0.019 www.kersemi.com