MAC15SD KERSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

MAC15SD, MAC15SM, MAC15SN Sensitive Gate Triacs Silicon Bidirectional Thyristors Designed for industrial and consumer applications for full wave control of ac loads such as appliance controls, heater controls, motor controls, and other power switching applications. Sensitive Gate allows Triggering by Microcontrollers and other Logic Circuits High Immunity to dv/dt - 25 V/s minimum at 110°C High Commutating di/dt - 8.0 A/ms minimum at 110°C Maximum Values of I GT , V GT and I H Specified for Ease of Design On-State Current Rating of 15 A RMS at 70°C High Surge Current Capability - 120 A Blocking V oltage to 800 V Rugged, Economical TO220AB Package Uniform Gate Trigger Currents in Three Quadrants, Q1, Q2, and Q3 Device Marking: Logo, Device Type, e.g., MAC15SD, Date Code MAXIMUM RATINGS J = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Off-State Voltage (Note 1) J = -40 to 110°C, Sine Wave, 50 to 60 Hz, Gate Open) MAC15SD MAC15SM MAC15SN V DRM, V RRM 400 600 800 V On-State RMS Current (Full Cycle Sine Wave, 60Hz, T J = 70°C) I T(RMS) A Peak Non-repetitive Surge Current (One Full Cycle Sine Wave,

60 Hz, T

J = 110°C) I TSM 120 A Circuit Fusing Consideration (t = 8.3 ms) I t A s Peak Gate Power (Pulse Width ≤ 1.0 s, T C = 70°C) P GM W Average Gate Power (t = 8.3 ms, T C = 70°C) P G(AV) 0.5 W Operating Junction Temperature Range T J - 40 to +110 Storage Temperature Range T stg - 40 to +150 TRIACS

15 AMPERES RMS

ORDERING INFORMATION

MAC15SD TO220AB 50 Units/Rail MAC15SM TO220AB TO-220AB CASE 221A Style 4 2 3 PIN ASSIGNMENT

3 Gate

4 Main Terminal 2

www.kersemi.com

50 Units/Rail

G MT2 MAC15SN TO220AB 50 Units/Rail MARKING DIAGRAM xx = Specific Device Code A = Assembly Location L = Wafer Lot Y = Year WW = Work Week MAC15xx ALYWW

MAC15SD, MAC15SM, MAC15SN www.kersemi.com THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance - Junction to Case - Junction to Ambient R JC R JA 2.0 62.5 °C/W Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 10 Seconds T L 260

ELECTRICAL CHARACTERISTICS

J = 25°C unless otherwise noted; Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Peak Repetitive Blocking Current D = Rated V DRM , V RRM ; Gate Open) T J = 25°C T J = 110°C I DRM I RRM 0.01 2.0 mA ON CHARACTERISTICS Peak On-State Voltage (1) TM = 21A) V TM 1.8 V Gate Trigger Current (Continuous dc) (V D = 12 V, R L = 100) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) I GT 2.0 3.0 3.0 5.0 5.0 5.0 mA Hold Current (V D = 12 V, Gate Open, Initiating Current = 150mA) I H 3.0 mA Latching Current (V D = 24V, I G = 5mA) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) I L 5.0 5.0 mA Gate Trigger Voltage (Continuous dc) (V D = 12 V, R L = 100) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) V GT 0.45 0.45 0.45 0.62 0.60 0.65 1.5 1.5 1.5 V DYNAMIC CHARACTERISTICS Rate of Change of Commutating Current D = 400V, I TM = 3.5A, Commutating dv/dt = 10V/sec, Gate Open, T J = 110°C, f= 500Hz, Snubber: C S = 0.01 F, R S =15, see Figure 15.) (di/dt)c 8.0 A/ms Critical Rate of Rise of Off-State Voltage D = Rate V DRM , Exponential Waveform, R GK = 510, T J = 110°C) dv/dt V/s 2. Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%.

MAC15SD, MAC15SM, MAC15SN www.kersemi.com + Current + Voltage V TM I H Symbol Parameter V DRM Peak Repetitive Forward Off State Voltage I DRM Peak Forward Blocking Current V RRM Peak Repetitive Reverse Off State Voltage I RRM Peak Reverse Blocking Current Voltage Current Characteristic of Triacs (Bidirectional Device) I DRM at V DRM on state off state I RRM at V RRM Quadrant 1 MainTerminal 2 + Quadrant 3 MainTerminal 2 -V TM I H V TM Maximum On State Voltage I H Holding Current MT1 (+) I GT GATE (+) MT2 REF MT1 (-) I GT GATE (+) MT2 REF MT1 (+) I GT GATE (-) MT2 REF MT1 (-) I GT GATE (-) MT2 REF MT2 NEGATIVE (Negative Half Cycle) MT2 POSITIVE (Positive Half Cycle) Quadrant III Quadrant IV Quadrant II Quadrant I Quadrant Definitions for a Triac I GT - + I GT All polarities are referenced to MT1. With in-phase signals (using standard AC lines) quadrants I and III are used.

MAC15SD, MAC15SM, MAC15SN www.kersemi.com PACKAGE DIMENSIONS TO-220AB CASE 221A-09 ISSUE AA NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 12 3 D SEATING PLANE -T- C ST U R J STYLE 4: PIN 1. MAIN TERMINAL 1 2. MAIN TERMINAL 2 3. GATE 4. MAIN TERMINAL 2