MAC4DSM KERSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

Small Size Surface Mount DPAK Package Passivated Die for Reliability and Uniformity Blocking V oltage to 800 V On−State Current Rating of 4.0 Amperes RMS at 108°C Low IGT − 10 mA Maximum in 3 Quadrants High Immunity to dv/dt − 50 V/s at 125°C Epoxy Meets UL 94, V−0 @ 0.125 in ESD Ratings: Human Body Model, 3B 8000 V Machine Model, C 400 V MAXIMUM RATINGS J = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Off−State Voltage (Note 1) (T J = −40 to 125°C, Sine Wave, 50 to 60 Hz, Gate Open) MAC4DSM MAC4DSN V DRM, V RRM 600 800 V On−State RMS Current (Full Cycle Sine Wave, 60 Hz, T C = 108°C) I T(RMS) 4.0 A Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, T J = 125°C) I TSM A Circuit Fusing Consideration (t = 8.3 msec) I t 6.6 A sec Peak Gate Power (Pulse Width ≤ 10 sec, T C = 108°C) P GM 0.5 W Average Gate Power (t = 8.3 msec, T C = 108°C) P G(AV) 0.1 W Peak Gate Current (Pulse Width ≤ 10 sec, T C = 108°C) I GM 0.2 A Peak Gate Voltage (Pulse Width ≤ 10 sec, T C = 108°C) V GM 5.0 V Operating Junction Temperature Range T J −40 to 125 Storage Temperature Range T stg −40 to 150 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. V DRM and V RRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the device are exceeded. TRIACS

4.0 AMPERES RMS

600 − 800 VOLTS Preferred devices are recommended choices for future use and best overall value. PIN ASSIGNMENT

3 Gate

4 Main Terminal 2

G MT2 DPAK−3 CASE 369D STYLE 6 DPAK CASE 369C STYLE 6 MARKING DIAGRAMS Y = Year WW = Work Week x = M or N 1 2 YWW AC 4DSx 2 3 YWW AC 4DSx See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.

ORDERING INFORMATION

www.kersemi.com

MAC4DSM, MAC4DSN www.kersemi.com THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance − Junction−to−Case Thermal Resistance − Junction−to−Ambient Thermal Resistance − Junction−to−Ambient (Note 2) R JC R JA R JA 3.5 °C/W Maximum Lead Temperature for Soldering Purposes (Note 3) T L 260

ELECTRICAL CHARACTERISTICS

J = 25°C unless otherwise noted; Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Peak Repetitive Blocking Current D = Rated V DRM , V RRM ; Gate Open) T J = 25°C T J = 125°C I DRM, I RRM 0.01 2.0 mA ON CHARACTERISTICS Peak On−State Voltage (Note 4) TM = ± 6.0 A) V TM 1.3 1.6 V Gate Trigger Current (Continuous dc) (V D = 12 V, R L = 100 ) MT2(+), G(+) MT2(+), G(−) MT2(−), G(−) I GT 2.9 2.9 2.9 4.0 5.0 7.0 mA Gate Trigger Voltage (Continuous dc) (V D = 12 V, R L = 100 ) MT2(+), G(+) MT2(+), G(−) MT2(−), G(−) V GT 0.5 0.5 0.5 0.7 0.65 0.7 1.3 1.3 1.3 V Gate Non−Trigger Voltage (Continuous dc) (V D = 12 V, R L = 100 ) J = 125°C V GD 0.2 0.4 V Holding Current D = 12 V, Gate Open, Initiating Current = ± 200 mA) I H 2.0 5.5 mA Latching Current (V D = 12 V, I G = 10 mA) MT2(+), G(+) MT2(+), G(−) MT2(−), G(−) I L 6.0 6.0 mA DYNAMIC CHARACTERISTICS Characteristic Symbol Min Typ Max Unit Rate of Change of Commutating Current D = 400 V, I TM = 3.5 A, Commutating dv/dt = 10 V/sec, Gate Open, T J = 125°C, f = 500 Hz, CL = 5.0 F, LL = 20 mH, No Snubber) See Figure 16 di/dt(c) 3.0 4.0 A/ms Critical Rate of Rise of Off−State Voltage D = 0.67 X Rated V DRM , Exponential Waveform, Gate Open, T J = 125°C) dv/dt 175 V/s 2. These ratings are applicable when surface mounted on the minimum pad sizes recommended. 3. 1/8″ from case for 10 seconds. 4. Pulse Test: Pulse Width ≤ 2.0 msec, Duty Cycle ≤ 2%. MAC4DSM−001 DPAK−3 369D

75 Units / Rail

16 mm Tape & Reel (2.5 k / Reel) MAC4DSN−001 DPAK−3 369D 16 mm Tape & Reel (2.5 k / Reel) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MAC4DSM, MAC4DSN + Current + Voltage V TM I H Symbol Parameter V DRM Peak Repetitive Forward Off−State Voltage I DRM Peak Forward Blocking Current V RRM Peak Repetitive Reverse Off−State Voltage I RRM Peak Reverse Blocking Current Voltage Current Characteristic of Triacs (Bidirectional Device) I DRM at V DRM on state off state I RRM at V RRM Quadrant 1 MainTerminal 2 + Quadrant 3 MainTerminal 2 −V TM I H V TM Maximum On−State Voltage I H Holding Current MT1 (+) I GT GATE (+) MT2 REF MT1 (−) I GT GATE (+) MT2 REF MT1 (+) I GT GATE (−) MT2 REF MT1 (−) I GT GATE (−) MT2 REF MT2 NEGATIVE (Negative Half Cycle) MT2 POSITIVE (Positive Half Cycle) Quadrant III Quadrant IV Quadrant II Quadrant I Quadrant Definitions for a Triac I GT − + I GT All polarities are referenced to MT1. With in−phase signals (using standard AC lines) quadrants I and III are used. www.kersemi.com

MAC4DSM, MAC4DSN PACKAGE DIMENSIONS DPAK CASE 369C ISSUE O D A K B RV S F L G 2 PL M 0.13 (0.005) T E C U J H −T− SEATING PLANE Z DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.235 0.245 5.97 6.22 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.027 0.035 0.69 0.88 E 0.018 0.023 0.46 0.58 F 0.037 0.045 0.94 1.14 G 0.180 BSC 4.58 BSC H 0.034 0.040 0.87 1.01 J 0.018 0.023 0.46 0.58 K 0.102 0.114 2.60 2.89 L 0.090 BSC 2.29 BSC R 0.180 0.215 4.57 5.45 S 0.025 0.040 0.63 1.01 V 0.035 0.050 0.89 1.27 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 123 5.80 0.228 2.58 0.101 1.6 0.063 6.20 0.244 3.0 0.118 6.172 0.243 mm inches SCALE 3:1 SOLDERING FOOTPRINT STYLE 6: PIN 1. MT1 2. MT2 3. GATE 4. MT2 www.kersemi.com

MAC4DSM, MAC4DSN PACKAGE DIMENSIONS DPAK−3 CASE 369D−01 ISSUE B 123 V S A K −T− SEATING PLANE R B F G D 3 PL M 0.13 (0.005) T C E J H DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.235 0.245 5.97 6.35 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.027 0.035 0.69 0.88 E 0.018 0.023 0.46 0.58 F 0.037 0.045 0.94 1.14 G 0.090 BSC 2.29 BSC H 0.034 0.040 0.87 1.01 J 0.018 0.023 0.46 0.58 K 0.350 0.380 8.89 9.65 R 0.180 0.215 4.45 5.45 S 0.025 0.040 0.63 1.01 V 0.035 0.050 0.89 1.27 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. Z STYLE 6: PIN 1. MT1 2. MT2 3. GATE 4. MT2 www.kersemi.com