M3PPI BROYCECONTROL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Le informazioni fornite nel presente documento sono precise (salvo modifiche senza preavviso); l’utente si assume tuttavia ogni rischio circa l’uso che ne farà. Es handelt sich in diesen Unterlagen um uns genau bekannte Angaben, (Änderungen vorbehalten) jedoch diese Änderungen laufen auf eigene Gefahr des Benutzers. Les indications contenues dans ce document sont exactes (sous réserve de changement sans avis préalable) toutefois aux risques et périls de l ' utilisateur The information provided in this literature is believed to be accurate (subject to change without prior notice); however, use of such information shall be entirely at the user's own risk Phase Sequence / Fail ure Indicator • Séquence de phase / Indicateur de défaillance Phasenfolge / Ausfallanzeige • Sequenza di fase / Indicatore guasti M3PPI

  • SCHEDA TECNICA Alimentazione/controllo 1. 180 - 260V AC 48 - 63Hz tensione U: 2. 300 - 500V AC 48 - 63Hz (da fase a fase) Impulso nominale resistenza alla tensione: 4kV (1.2/50µS) Consumo energetico: < 4VA Temperatura ambiente: -20 to +60°C Umidità relativa: +95% Alloggiamento: secondo UL94 VO Peso: ≈ 81g Opzione montaggio: secondo BS5584:1978 (EN50 002, DIN 46277-3) Dimensioni cavo conduttore terminale: ≤ 2 x 2.5mm2 a filo pieno / a trefolo Omologazioni: UL, CUL, CSA. Conformità CE
  • MONTAGGIO E REGOLAZIONE Il lavoro dell'installazione deve essere effettuato dai personali qualificati.
  • PRIMA DELL’INSTALLAZIONE, ISOLARE L’ALIMENTAZIONE
  • Collegare l’unità come illustrato nel diagramma in alto.
  • Applicare la potenza (LED rossi R, Y & B accesi, LED verde 'Corretto' acceso). Localizzazione guasti
  • Verificare il cablaggio e la presenza della tensione.
  • Verificare se la sequenza è errata.
  • Invertire 2 fasi. q SEQUENZA DI FASE ERRATA / ROTAZIONE q GUASTO DI FASE / PERDITA
  • TECHNICAL SPECIFICATION Supply/monitoring 1. 180 - 260V AC 48 - 63Hz voltage U: 2. 300 - 500V AC 48 - 63Hz (phase to phase) Rated impulse withstand voltage: 4kV (1.2/50µS) Power consumption: < 4VA Ambient temperature: -20 to +60°C Relative humidity: +95% Housing: to UL94 VO Weight: ≈ 81g Mounting option: to BS5584:1978 (EN50 002, DIN 46277-3) Terminal conductor size: ≤ 2 x 2.5mm2 solid / stranded Approvals: UL, CUL, CSA. CE and Compliant
  • FICHES TECHNIQUES Voltage d ' alimentation 1. 180 - 260V AC 48 - 63Hz contrôlée U: 2. 300 - 500V AC 48 - 63Hz (mise en phase) Impulsion nominale résistant à la tension: 4kV (1.2/50µS) Puissance consommée: < 4VA Température ambiante: -20 à +60°C Humidité relative: +95% Boitier: à UL94 VO Poids: ≈ 81g Option de montage: à BS5584:1978 (EN50 002, DIN 46277-3) Taille du conducteur terminal: ≤ 2 x 2.5mm2 toron / multi-filaire Homologations: UL, CUL, CSA. CE et Déférence
  • TECHNISCHE DATEN Stromversorgung / 1. 180 - 260V AC 48 - 63Hz Spannungskontrolle U: 2. 300 - 500V AC 48 - 63Hz (phase zu phase) Nenn-Impulse Spannungswiderstand: 4kV (1.2/50µS) Energieverbrauch: < 4VA Umgebungstemperatur: -20 bis +60°C Allgemeiner Feuchtigkeitsgehalt: +95% Gehäuse: bis UL94 VO Gewicht: ≈ 81g Befestigungswahl: bis BS5584:1978 (EN50 002, DIN 46277-3) Anschlussklemme / Kabelgrösse: ≤ 2 x 2.5mm2 Festdraht / Litze Genehmigungen: UL, CUL, CSA. CE und Übereinstimmung
  • INSTALLATION AND SETTING Installation work must be carried out by qualified personnel.
  • BEFORE INSTALLATION, ISOLATE THE SUPPLY.
  • Connect the unit as shown in the diagram above.
  • Apply power (red R, Y & B LED's on, green 'Correct' LED on). Troubleshooting
  • Check wiring and voltage present.
  • If incorrect sequence.
  • Reverse any 2 phases.
  • MONTAGE ET MISE AU POINT Des travaux d'installation doivent être menés à bien par le personnel qualifié.
  • AVANT MONTAGE, ISOLER L ' ALIMENTATION
  • Branchement comme indiqué dans le diagramme ci-dessus.
  • Appliquer la puissance (LEDS rouges R, Y & B allumée, LED verte 'correcte' allumée). Intervention (pour régler un problème)
  • Vérifier les fils et le voltage présent.
  • Si séquence incorrecte.
  • Inverser 2 phases.
  • EINBAU UND EINSTELLUNG Installation Arbeit muß von qualifiziertem Personal durchgeführt werden.
  • VOR EINBAU DIE STROMVERSORGUNG ISOLIEREN
  • Stromversorgung anschliessen wie im Schaltbild unten angezeigt.
  • Energie anbringen (LED rot R, Y & B an, LED grün 'richtig' an). Störungsbehebung
  • Überprütung von Leitungen und gegenwärtiger Spannung.
  • Folgefehler.
  • 2 phasen umschalten. q INCORRECT PHASE SEQUENCE / ROTATION q PHASE FAILURE / LOSS q SÈQUENCE DE PHASE INCORRECTE / ROTATION q DÈFAILLANCE DE PHASE / PERTE q PHASENFOLGE FALSCH / AMLAUF q PHASENAUSFALL / VERLUST CONNECTION DIAGRAM DIAGRAMME DE CONNECTION SCHALTBILDANSCHLUSS DIAGRAMMA DI CONNESSIONE (L1) R R B Y (L2) Y (L3) B TIMING DIAGRAM DIAGRAMME DES TEMPS ZEITDIAGRAMM DIAGRAMMA TEMPI R(L1) Y(L2) B(L3) R Y B Incorrect Correct B(L3) Y(L2) Illuminated Extinguished LED Status PRESENCE SEQUENCE MOUNTING DETAILS INSTRUCTIONS DE MONTAGE MONTAGEAUFÜHRUNGEN ISTRUZIONI DI MONTAGGIO Insert screwdriver to release clips 89 (excl. clips) 49 59 Withdraw clips fully when surface mounting 93 (+/- 1mm) Width / largeur / Breite / Largh.. 35 mm (DIN 43880)