FMM5007VF EUDYNA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Ku Band Power Amplifier MMIC
FEATURES
・High Output Power: 31.0dBm(typ.) ・High Linear Gain: 20.0dB(typ.) ・Low Input VSWR ・Impedance Matched Zin/Zout = 50Ω ・Small Hermetic Metal-Ceramic SMT Package(VF-pkg) Edition 2.0 September 2004 1 FMM5007VF
DESCRIPTION
The FMM5007VF is a MMIC amplifier that contains a three-stage amplifier, internally matched, for standard communications in the 14.0 to 14.5GHz frequency range. This product is well suited for VSAT applications as a driver or output stage. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING Item Symbol Unit DC Input Voltage VDD V DC Input Voltage VGG V Input Power Pin dBm Storage Temperature Tstg oC RECOMMENDED OPERATING CONDITION Item Symbol Unit DC Input Voltage VDD V DC Input Voltage VGG V Operating Case Temperature Tc oC ELECTRICAL CHARACTERISTICS (Case Temperature Tc=25 oC) Min. Typ. Max. Frequency f 14.0 - 15 GHz Linear Gain G 18.0 20.0 - dB Gain Flatness ∆∆∆∆ G- 1 . 0 1 . 5 d B Input VSWR VSWRi - 2:1 2.3:1 - Output VSWR VSWRo - 2.3:1 3:1 - Power Monitor ( Rmon=10Kohm ) Vmon Pout=30dBm -3 . 5- V DC Input Current IDD - 1000 1200 mA DC Input Current IGG - 15 20 mA G.C.P.:Gain Compresstion Point ESD Note : Based on EIAJ ED-4701 C-111A(C=100pF, R=1.5kΩ ) CASE STYLE Unit VDD=10V VGG=-5 V f =14.0-14.5G Hz VF Class 0 ~ 199V VDD=10V VGG=-5 V Item Symbol Condition Limit -55 to +125 -40 to +85 Condition Rating
Ku band Power Amplifier MMIC FMM5007VF
Ku Band Power Amplifier MMIC -30 -25 -20 -15 -10 Frequency [GHz] Input/Output Return Loss [dB] Frequency [GHz] Small Signal Gain [dB] ■■■■ S-PARAMETER - Input Return Loss - Output Return Loss INPUT/OUTPUT RETURN LOSS vs. FREQUENCY Vdd=10V, Vgg=-5V SMALL SIGNAL GAIN vs. FREQUENCY Vdd=10V, Vgg=-5V VDD=10V, VGG=-5V Frequency S11 S21 S12 S22 [ MHz ] MAG ANG MAG ANG MAG ANG MAG ANG
Ku band Power Amplifier MMIC FMM5007VF ■■■■ Package Outline PIN ASSIGMENT 1 : VDD 2 : RF in 3 : VGG 4 : Pmon 5 : RF out 6 : VDD
Table 1. Recommended and Maximum Torque for Screw Mounting (2) First, tighten the screws with a torque driver set to 5 N-cm. flatness must be better than 10 µm. 3.0Ag-0.5Cu)*1 or equivalent. appropriate cleaning methods.
Ku band Power Amplifier MMIC FMM5007VF ■■■■ Recommended Bias Circuit and Internal Block Diagram PIN ASSIGMENT 1 : VDD 2 : RF in 3 : VGG 4 : Pmon 5 : RF out 6 : VDD Note 1: The capacitors are recommended on the bias supply line, close to the package, in order to prevent video oscillations which could damage the module. Note 2: Two pins of VDD are internally connected respectively. Note 3: The external resistor ( 10Kohm ) on the board is necessary to monitor the output power.
Ku Band Power Amplifier MMIC For further information please contact : Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Incorporated reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Incorporated or others. Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: ・Do not put these products into the mouth. ・Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by- products are dangerous to the human body if inhaled, ingested, or swallowed. ・Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Asia Pte. Ltd. Hong Kong Branch Rm.1101,Ocean Centre, 5 Canton Road Tsim Sha Tsui, Kowloon, Hong kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc. JAPANESE SALES OFFICE(Head Office) 1, Kanai-cho, Sakae-ku, Yokohama, 244-0845, Japan Tel: +81-45-853-8150 Fax: +81-45-853-8170 www.eudyna.com © 2004 Eudyna Devices USA Inc. Printed in U.S.A.