Interface

AKD5373

Asahi Kasei Microsystem...

24-bit Stereo ADC with USB Interface

Manufacturer: Asahi Kasei Microsystem...

Document: 53 Pages / 567Kb

Request Quote Download Datasheet Read online HTML view

More from Asahi Kasei Microsystem... Browse A parts

Online Datasheet

Read AKD5373 online.

AK5373 AKM | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 53

Technical content

[AK5373] MS1202-E-00 2010/06 - 1 - GENERAL DESCRIPTION The AK5373 is a stereo A/D converter with a USB 2.0 interface. The device includes an integrated USB serial interface engine, a USB transceiver, an audio class processing block, endpoints, and a 24-bit stereo audio ADC. An integrated P LL enables the use of multiple sampling frequencies. A microphone amplifier and an integrated programm able gain amplifier are available for processing low-level signals from an analog microphone element. An external EEP-ROM is used to store the descriptor information. The AK5373 is housed in a 48-pin pa ckage. It is a low power devic e, operating from +3.3V, and consuming just 100mW in active mode and less than 100μA in suspend mode.

FEATURES

USB 2.0 compliant (full speed audio class) USB audio controller USB serial interface engine Audio class encoder/decoder USB synchronization Synchronous type (synchronize with 1ms SOF) 24-bit stereo A/D converter with mute control S/(N+D) = 85dB, S/N = 91dB (AVDD=3.3V, MIC-Amp = 0dB) S/(N+D) = 70dB, S/N = 78dB (AVDD=3.3V, MIC-Amp = +30dB) Microphone amplifier gain: 0dB, +6dB, +12dB, +18dB, +24dB, +30dB, +36dB Digital programmable gain: +24dB ~ -31dB, 1dB Step Integrated PLL supports standard sampling frequencies 8kHz, 11.025kHz, 16kHz, 22.05kHz, 32kHz 44.1kHz, 48kHz EEP-ROM interface for descriptors External Digital Audio Interface Power Management Low power consumption 30mA in active mode Less than 100μA in suspend mode Power Supply: Analog Power Supply (AVDD): 3.0 ~ 3.6V Digital Power Supply (DVDD): 3.0 ~ 3.6V Ta = -10 ~ +70°C Package: 48pin LQFP (7 x 7 mm, 0.5mm pitch) 24-bit Stereo ADC with USB Interface AK5373

Figure 1. Block Diagram

[AK5373] MS1202-E-00 2010/0 6 - 3 - ■ Ordering Guide AK5373EQ −10 ∼ +70°C 48pin LQFP (0.5mm pitch) AKD5373 Evaluation board for AK5373 ■ Pin Layout AT I O NC VREF VCOM 40 MPWR 41 AVDD 42 NC 43 VSS3 44 MICRN 45 MICRP 46 NC 47 NC 48 CK M 35 XT O 34 XTI 33 XTE 32 CLKDRV 31 TESTM3 30 MGAIN0 29 MGAIN1 28 MGAIN2 27 DP 26 MICLN 1 MICLP 2 LMUTEN 3 RMUTEN 4 SDTI 5 SDTO 6 BICK 7 LRCK 8 TESTM0 9 MCLK 10 SUSN 11 NC DVDD TESTM2 CSN SK EPAO EPAI NC VSS1 NC TESTM1 AK5373EQ T op View RSTN 12

24 VSS2 DN 25

[AK5373] MS1202-E-00 2010/0 6 - 4 - PIN/FUNCTION No. Pin Name I/O Function Reset State (RSTN pin = “L”)

1 MICLN I Left Channel Inverting Input Pin ←

2 MICLP I Left Channel Positive Input Pin ←

3 LMUTEN I

“L”: Mute “H”: Normal Operation

4 RMUTEN I

“L”: Mute “H”: Normal Operation

5 SDTI I External Audio Serial Data Input Pin ←

6 SDTO O External Audio Serial Data Output Pin “L” output

7 BICK O External Audio Serial Clock Output Pin “L” output

8 LRCK O External Audio Channel Clock Output Pin “L” output

9 TESTM0 I Test #0 Pin

This pin must be connected to VSS1-3. ←

10 MCLK O External Audio Master Clock Output Pin “L” output

11 SUSN O

“L”: Suspend State “H”: Normal Operation “L” output

12 RSTN I

When “L”, the AK5373 is held in reset. The AK5373 must be always reset upon power-up.

13 TESTM1 I Test #1 Pin

This pin must be connected to VSS1-3. ←

14 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ←

15 VSS1 - Ground Pin ←

16 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ←

17 EPAI I EEP-ROM Serial Data Input Pin ←

18 EPAO O EEP-ROM Serial Data Output Pin “Hi-Z”

19 SK O EEP-ROM Serial Clock Output Pin “Hi-Z”

20 CSN O EEP-ROM Chip Select Output Pin “Hi-Z”

21 TESTM2 I Test #2 Pin

This pin must be connected to VSS2. ← 22 DVDD - Digital Power Supply Pin, 3.0 ~ 3.6V ←

23 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ←

24 VSS2 - Ground Pin ←

25 DN I/O USB Bus Inverting Pin Input

26 DP I/O USB Bus Positive Pin

This pin must be connected to DVDD with 1.5kΩ resistor. Input

27 MGAIN2 I MIC Gain Control 2 Pin ←

28 MGAIN1 I MIC Gain Control 1 Pin ←

29 MGAIN0 I MIC Gain Control 0 Pin ←

30 TESTM3 I Test #3 Pin

This pin must be connected to VSS1-3. ←

31 CLKDRV O Clock Drive Output Pin “L” output

32 XTE I

Crystal Oscillator Enable Pin “L”: Master Clock Input Mode “H”: Crystal Oscillator Mode

[AK5373] MS1202-E-00 2010/0 6 - 5 - No. Pin Name I/O Function Reset State (RSTN pin = “L”) MCKI I Master Clock Input Pin (XTE pin = “L”) ← 33 XTI I Crystal Oscillator Input Pin (XTE pin = “H”) ←

34 XTO O Crystal Oscillator Output Pin “L” output

35 CKM I

“L”: 16MHz “H”: 24MHz

36 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ←

37 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ←

38 ATIO I/O Test Pin

This pin must be connected to VSS1-3. “Input”

39 VREF O High Level Voltage Reference Output Pin “L” output

40 VCOM O Analog Common Voltage Output Pin “L” output

41 MPWR O Microphone Power Supply Pin “Hi-Z”

42 AVDD - Analog Power Supply Pin, 3.0 ~ 3.6V ←

43 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ←

44 VSS3 - Ground Pin ←

45 MICRN I Right Channel Inverting Input Pin ←

46 MICRP I Right Channel Positive Input Pin ←

47 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ←

48 NC - No Connect Pin

No internal bonding. Normally connected to VSS1-3. ← Note 1. All digital input pins (EPAI, SDTI, MGAIN0/1/2, CKM, LMUTEN, RMUTEN, XTE and TESTM0/1/2/3 pins) must not be left floating.

[AK5373] MS1202-E-00 2010/0 6 - 6 - ■ Handling of Unused Pin The unused I/O pin must be processed appropriately as below. Classification Pin Name Setting MICLP, MICLN MICLP pin is connected to MICLN pin. MICRP, MICRN MICRP pin is connected to MICRN pin. Analog Input ATIO This pin must be connected to VSS1-3. Analog Output MPWR This pin must be open. SDTI, MGAIN1/2/3, CKM, XTE, TESTM0/1/2/3 These pins must be connected to VSS1-3. Digital Input LMUTEN, RMUTEN These pins must be connected to DVDD. Digital Output SUSN, MCLK, LRCK, BICK, SDTO, CLKDRV These pins must be open. ABSOLUTE MAXIMUM RATINGS (VSS1=VSS2=VSS3=0V; Note 2) Parameter Symbol min max Units Power Supplies: Analog Digital AVDD DVDD -0.3 -0.3 4.6 4.6 V V Input Current, Any Pin Except Supplies IIN - ±10 mA Analog Input Voltage (Note 3) VINA -0.3 AVDD+0.3 V Digital Input Voltage (Note 4) VIND -0.3 DVDD+0.3 V Ambient Temperature (power applied) Ta -10 70 °C Storage Temperature Tstg -65 150 °C Note 2. All voltages with respect to ground. Note 3. MICLP, MICLN, MICRP and MICRN pins. Note 4. MGAIN0/1/2, CKM, LMUTEN, RMUTEN, SDTI, EPAI, XTE and TESTM0/1/2/3 pins. WARNING: Operation at or beyond these limits may result in permanent damage to the device. Normal operation is not guaranteed at these extremes. RECOMMENDED OPERATING CONDITIONS (VSS1=VSS2=VSS3=0V; Note 2) Parameter Symbol min typ max Units Power Supplies (Note 5) Analog Digital Difference AVDD DVDD AVDD-DVDD 3.0 3.0 -0.3 3.3 3.3 3.6 3.6 +0.3 V V V Note 2. All voltages with respect to ground. Note 5: The power up sequence among AVDD and DVDD is not critical. WARNING: AKM assumes no responsibility for the usage beyond the conditions in this datasheet.

[AK5373] MS1202-E-00 2010/0 6 - 7 - ANALOG CHARACTERISTICS (Ta=25°C; AVDD=DVDD=3.3V; VSS1=VSS2=VSS3=0V; Signal Frequency = 1kHz; Sampling Frequency = 48kHz; BW = 20Hz to 20kHz, unless otherwise specified) Parameter min typ max Units Microphone Amplifier: MICLP/MICLN/MICRP/MICRN pins Input Resistance 10 20 - kΩ MGAIN2-0 bits = “001” -1 0 +1 dB MGAIN2-0 bits = “010” +5 +6 +7 dB MGAIN2-0 bits = “011” +11 +12 +13 dB MGAIN2-0 bits = “100” +17 +18 +19 dB MGAIN2-0 bits = “101” +23 +24 +25 dB MGAIN2-0 bits = “110” +29 +30 +31 dB Gain MGAIN2-0 bits = “111” +35 +36 +37 dB Microphone Power Supply: MPWR pin Output Voltage 1.9 2.2 2.5 V Output Current - - 2.0 mA ADC Analog Input Characteristics: MICLP/MICLN/MICRP/MICRN pins Resolution - - 24 Bits (Note 6) ±1.00 ±1.20 ±1.40 Vpp Input Voltage (Note 7) - ±0.038 - Vpp (Note 6) 75 85 - dB S/(N+D) (-1dBFS) (Note 7) - 70 - dB (Note 6) 81 91 - dB Dynamic Range (−60dBFS, A-weighted) (Note 7) - 78 - dB (Note 6) 81 91 - dB S/N (A-weighted) (Note 7) - 78 - dB Power Supplies: Power Supply Current Normal operation (internal ADC mode) AVDD DVDD mA mA Power down RSTN pin = “L” (Note 8) Suspend mode 100 100 μA μA Note 6. MGAIN2-0 bits = “001” (0dB) Note 7. MGAIN2-0 bits = “110” (+30dB) Note 8. All digital input pins are fixed to DVDD or VSS2.

[AK5373] MS1202-E-00 2010/0 6 - 8 - FILTER CHARACTERISTICS (Ta=-10 ~ +70°C; A VDD=DVDD=3.0 ~ 3.6V; fs=48kHz) Parameter Symbol min typ max Units ADC Digital Filter Passband (Note 9) -0.07 ~ +0.15dB PB 0 - 18.9 kHz -0.2dB - 20.3 - kHz -3.0dB - 22.9 - kHz -6.0dB - 23.9 - kHz Stopband SB 28.0 - - kHz Passband Ripple PR -0.07 - +0.15 dB Stopband Attenuation SA - 68.0 - dB Group Delay GD - 14 - 1/fs Group Delay Distortion ΔGD - 0 - μs ADC Digital Filter (HPF): Frequency Response (Note 9) -3.0dB -0.1dB FR - 0.93 6.1 Hz Hz Note 9. The passband and stopband frequencies scale with fs (system sampling rate). Each response refers to that of 1kHz DC CHARACTERISTICS (Ta=-10~+70°C; AVDD=DVDD=3.0 ∼ 3.6V) Parameter Symbol min typ max Units High-Level Input Voltage ( Note 11) VIH 70%DVDD - - V Low-Level Input Voltage ( Note 11) VIL - - 30%DVDD V High-Level Output Voltage (Note 12, Iout=−200μA) VOH DVDD−0.2 - - V Low-Level Output Voltage (Note 12, Iout=200μA) VOL - - 0.2 V Input Leakage Current ( Note 13) Iin - - ±10 μA Note 10. All digital pins except for DP, DN pins. Schmitt hysteresis level of RSTN pin and levels of all test pins are not tested. Note 11. EPAI, SDTI, MGAIN1/2/3, CKM, LMUTEN, RMUTEN, RSTN, XTE and TESTM0/1/2/3 pins. Note 12. CSN, SK, EPAO, SUSN, MCLK, LRCK, BICK, SDTO and CLKDRV pins. Note 13. Expect for EPAI pin. EPAI pin has internal pull-down device, nominally 100kΩ.

[AK5373] MS1202-E-00 2010/0 6 - 9 - SWITCHING CHARACTERISTICS (Ta=25°C; AVDD=DVDD=3.3V; CL=50pF) Parameter Symbol min typ max Units Master Clock Frequency Crystal Resonator CKM pin = “L” fXTAL1 - 16 - MHz CKM pin = “H” fXTAL2 - 24 - MHz USB Interface DP, DN Single Ended Receiver Threshold (High-Level) (Low-Level) VseH VseL 2.0 0.8 V V Time Width for USB Reset Signal Recognition (DP<VseL & DN< VseL to USB Reset mode) Trst_rec 2.7 μs Device Ready Time from USB Reset (Ready for transaction after reset) Tdrr ms Time Width for Suspend Recognition (Idle state DP > VseL & DN < VseL to Suspend mode) Tsus_rec 3.0 ms Resume Time from Suspend (Note 14) (First flip of DP/DN from Idle sate to Device Ready) Tresm ms USB Transmitter Data Rate DR 11.97 12 12.03 MHz Output Impedance (Hi) (Note 15) (DP, DN pins = “H”, Iout = -10mA) Roh Ω Output Impedance (Lo) (Note 15) (DP, DN pins = “L”, Iout = 10mA) Rol Ω “H” level Output Voltage (Iout = -200µA) Vohd 2.8 - - V “L” level Output Voltage (Iout = 2.2mA) Vold - - 0.3 V Tri-state Leakage Current (0 < DP, DN < 3.3V) Iolk -10 - 10 μA Rise/Fall Time Trf/Tff 4 12 20 ns Rise/Fall Time Matching Trfm - 100 - % Crossover Point Vcrs - 1.65 - V USB Receiver Common Mode Range CMR 0.8 - 2.5 V Differential Input Sensitivity DIS 200 - - mV Schmitt High Level Voltage Vihs 2.0 - - V Schmitt Low Level Voltage Vils - - 0.8 V Note 14. VREF, X’tal oscillator, and PLL get stable and bus transaction with normal rate is ready. Note 15. Including an external 18Ω (±1%) resistor in series.

[AK5373] MS1202-E-00 2010/0 6 - 10 - Parameter Symbol min typ max Units External Audio Mode MCLK Output Timing Frequency fMCK 2.048 - 24.576 MHz Duty Cycle dMCK 40 50 60 % LRCK Output Timing Frequency fs 8 - 48 kHz Duty Cycle Duty - 50 - % BICK Output Timing Period tBCK - 1/(64fs) - ns Duty Cycle dBCK - 50 - % Audio Interface Timing BICK “↓” to LRCK Edge (Note 16) tMBLR −40 - 40 ns LRCK Edge to SDTO (MSB) (Except I2S mode) tLRD −70 ns BICK “↓” to SDTO tBSD −70 - 70 ns SDTI Hold Time tSDH 50 - - ns SDTI Setup Time tSDS 50 - - ns SPI (EEP-ROM) Control Interface Timing SK Frequency fSK - 1.5 - MHz SK Duty Cycle dSK - 50 - % EPAI Delay tCD - - 100 ns CSN Edge to SK “ ↑” tCSS 300 - - ns SK “ ↓” to CSN Edge tCSH 300 - - ns CSN “H” Time tCSW 300 - - ns EPAI Setup Time tCDS 100 - - ns EPAI Hold Time tCDH 100 - - ns One Shot Mute Timing One Shot Mute Input Width Wosm 10 - - μs Reset Timing Reset Input Width (Note 17) Wrst 1.0 - - μs Note 16. BICK rising edge must not occur at the same time as LRCK edge. Note 17. The AK5373 can be reset by the RSTN pin = “L”.

Figure 11. SPI (EEP-ROM) Control Interface Timing

[AK5373] MS1202-E-00 2010/0 6 - 14 - OPERATION OVERVIEW ■ Overview of AK5373 The AK5373 is a stereo A/D converter with USB interface. It is easy to use since the control logic including USB audio class, stereo differential microphone amplifiers, two PLL’ s USB serial interface engine, and FIFO are integrated. All Descriptor contents are stored in EEP-ROM and customizable. For example, when supporting a mono microphone by 48kHz sampling rate only, what needed to be done is to prepare appropriate USB descriptor. There is no need for writing program codes. The AK5373 also has an external audio steaming interface to connect other A/D converters or audio DSP’s. When a high performance A/D converters is connected, A/D data generated by this A/D converter are transmitted via USB upstream. When an external audio DSP is connected, the output of AK5373 is processed by this DSP. The AK5373 receives this data again and transmits. I/F format is stored in the EEP-ROM header. The AK5373 integrates the following blocks: 1. 24bit High Performance Stereo A/D Converter a) S/N: 91dB (MIC Gain=0dB), S/N: 78dB (MIC Gain=+30dB) 2. MIC Power Supply a) Output Voltage: 2.2V (typ) 3. Differential Microphone Amplifier a) Setting of Gain: 0dB, +6dB, +12dB, +18dB, +24dB, +30dB, +36dB 4. Digital Programmable Gain a) Gain Range: from +24dB to -31dB (Setting of gain: Max, Min and Initial value) b) Gain Step: 1dB/step (Fix) 5. PLL a) 16.0MHz or 24.0MHz crystal generator with output buffer (Available for External Clock input) b) Two PLLs - A/D_PLL: generate audio clock - System_PLL: generate USB system clock 6. Audio Synchronization Type a) Synchronous Type - Isochronous transfer uses Synchronous type synchronization which is synchronous to SOF (start of frame) packets which are issued per 1ms. 7. USB Audio Format a) Supports 7 Frequencies: 8kHz, 11.025kHz, 16kHz, 22.05kHz, 32kHz, 44.1kHz, 48kHz b) Stereo/Mono 24bit/16bit/8bit LSB first 8. FIFO a) Synchronization between A/D converter and USB bus - Memory Size 576 bytes: 24bit (3 bytes) x 48 samples x 2 channel x 2 frames 9. USB Serial Interface Engine a) Process USB Standard Requests 10. Control block of Audio Device Class a) Translate internal A/D format to USB audio class format b) Process USB Audio Class Request - Mute - Gain/Attenuation - Sampling Frequency Control 11. USB transceiver 12. EEP-ROM I/F SPI™ (4-wire) type EEP-ROM can be used to customize all USB descriptors and any functions. - 8K bits (AK6506C) or larger 13. USB Suspend/Resume Support 14. External Digital Audio Interface a) 24bit I2S or MSB justified b) MCLK=256fs or 512fs, BICK=64fs 15. Stand-alone Mute a) Zero Crossing detection mute or One Shot mute (not support HID function)

Table 2. Mic Input Gain (x: Don’t care) minimum 1kΩ for each channel. Any capacitor must not be connected directly to the MPWR pin (Figure 14).

0 Hi-Z

1 Output

Table 3. MIC Power Figure 14. MIC Block Circuit

fs=48kHz. The digital high pass filter cut-off frequency scales with the sampling rate (fs). The HPF is always enabled. The AK5373 supports 8bit, 16bit and 24bit audio data format and outputs LSB first to USB bus. Table 4. Audio Data Format for 8bit mono Table 5. Audio Data Format for 16bit stereo

·· bit position 0-7 8-15 16-23 0-7 8-15 16-23 0-7 8-15 16-23 0-7 8-15 16-23 ···

Table 6. Audio Data Format for 24bit stereo

formats which can be selected from 8/16/24 bit. This interface is specified in the header of EEP-ROM. Figure 15. External Digital Audio Interface Table 7. MCLK Output Frequency

0 MSB justified MSB justified

1 I 2S Compatible I 2S Compatible

Table 8. Audio Interface Format minimum and default volumes are defined by EEP-ROM header setting. volume mentioned in this section. Table 9. Zero Crossing Timeout Period because the AK5373 does not have HID function, the mute operation by these pins cannot be acknowledged by the host.

[AK5373] MS1202-E-00 2010/0 6 - 20 - ■ Power Management Control USB specifies that the current at suspend mode must not exceed 500 μA. When the USB host is in suspend mode, the SUSN pin also becomes to “L” in order to notify this mode to the external components like DSP’s to observe USB specification. ■ Synchronization The AK5373 supports synchronous type synchronization which is synchronous to SOF (start of frame) packets which are issued per 1ms. ■ Descriptor’s Customization USB audio class has very flexible, but complicated format. In order to keep both of the flexibility and simplicity to use, the AK5373 utilizes the precompiled control information in EEP-ROM instead of direct USB audio class decoding. Data in EEP-ROM is divided into two blocks; header information block and USB descriptor block. Header block size is fixed while USB descriptor block size is variable. Header information includes various control information such as audio format, the microphone’s gain, power management information, and etc. When the device is powered up, at first the AK5373 reads the header block in EEP-ROM, and maps these values into the internal registers. Note that 8k bits or larger SPI type EEP-ROM is available. The AK5373 does not store all of the descriptors into intern al memory at the boot time. Instead, the AK5373 reads the descriptor from EEP-ROM and transmit it when it recei ves the “Get Descriptor” Request command. The AK5373 transmits NAK until it is ready to send data. Header Information includes 1) Power Management Information 2) Microphone Gain 3) External Digital Audio Interface Information 4) Mute Control Information 5) Descriptor related information a) PCM format(stereo/mono, resolution) and the related alternate setting number b) Endpoint number c) Initial/Minimum/Maximum Volume

Figure 18. EEP-ROM I/F Read Sequence

[AK5373] MS1202-E-00 2010/0 6 - 22 - <Descriptor Block> Addr Descriptor Size 020H ~ 023H Language ID String Descriptor 4 bytes 024H ~ 0A3H iManufacturer String Descriptor 128 bytes (max) 0A4H ~ 123H iProduct String Descriptor 128 bytes (max) 124H ~ 1A3H iSerial Number St ring Descriptor 128 bytes (max) 1A4H ~ 1B5H Device Descriptor 18 bytes 1B6H ~ 1BEH Configuration Descriptor 9 bytes 1BFH ~ 1C7H Standard Audio Cont rol Interface Descriptor 9 bytes 1C8H ~ 1D0H Class-specific Audio C ontrol Interface Descriptor 9 bytes 1D1H ~ 1DCH Input Terminal Descriptor 12 bytes 1DDH ~ 1E5H Output Termin al Descriptor 9 bytes 1E6H ~ Feature Unit Descriptor 8 or 10 bytes Zero-bandwidth Alternate Setting 0 Standard AS Interface Descriptor 9 bytes Alternate Setting 1 Standard AS Interface Descriptor Class-specific AS General Interface Descriptor Type 1 Format Type Descriptor Standard Endpoint Descriptor Class-specific Isochronous Audio Data Endpoint Descriptor 9 bytes 6 bytes 11 ~ 29 bytes 9 bytes 7 bytes Alternate Setting 2 Standard AS Interface Descriptor Class-specific AS General Interface Descriptor Type 1 Format Type Descriptor Standard Endpoint Descriptor Class-specific Isochronous Audio Data Endpoint Descriptor 9 bytes 6 bytes 11 ~ 29 bytes 9 bytes 7 bytes Alternate Setting 3 Standard AS Interface Descriptor Class-specific AS General Interface Descriptor Type 1 Format Type Descriptor Standard Endpoint Descriptor Class-specific Isochronous Audio Data Endpoint Descriptor 9 bytes 6 bytes 11 ~ 29 bytes 9 bytes 7 bytes Alternate Setting 4 Standard AS Interface Descriptor Class-specific AS General Interface Descriptor Type 1 Format Type Descriptor Standard Endpoint Descriptor Class-specific Isochronous Audio Data Endpoint Descriptor 9 bytes 6 bytes 11 ~ 29 bytes 9 bytes 7 bytes Alternate Setting 5 Standard AS Interface Descriptor Class-specific AS General Interface Descriptor Type 1 Format Type Descriptor Standard Endpoint Descriptor Class-specific Isochronous Audio Data Endpoint Descriptor 9 bytes 6 bytes 11 ~ 29 bytes 9 bytes 7 bytes Alternate Setting 6 Standard AS Interface Descriptor Class-specific AS General Interface Descriptor Type 1 Format Type Descriptor Standard Endpoint Descriptor Class-specific Isochronous Audio Data Endpoint Descriptor 9 bytes 6 bytes 11 ~ 29 bytes 9 bytes 7 bytes Alternate Setting 7 Standard AS Interface Descriptor Class-specific AS General Interface Descriptor Type 1 Format Type Descriptor Standard Endpoint Descriptor Class-specific Isochronous Audio Data Endpoint Descriptor 9 bytes 6 bytes 11 ~ 29 bytes 9 bytes 7 bytes Note 20. Read address after a reset release: 000H~016H, 024H, 0A4H, 124H, 1B8H~1B9H (Total 28bytes) Note 21. The data address must be written slide forward if the number of bytes is less than the data size above in the address after 1E6H. Note 22. The setting of 003H~011H and the setting after 1F9H must be matched.

[AK5373] MS1202-E-00 2010/0 6 - 23 - Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 00H Power Management 0 0 0 SELF 0 CLKO PMADR PMADL PMADL: MIC-Amp Lch and ADC Lch Power Management “0”: Power-up “1”: Power-down PMADR: MIC-Amp Rch and ADC Rch Power Management “0”: Power-up “1”: Power-down CLKO: Master Clock Output Driver Power Management “0”: Power-up “1”: Power-down SELF: Self Power Mode Enable “0”: Bus Power Mode “1”: Self Power Mode Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 01H Microphone Gain Control 0 0 0 PMMP 0 MGAIN2 MGAIN1 MGAIN0 MGAIN2-0: MIC-Amp Gain Control (Enabled when the MGAIN2 pin = MGAIN1 pin = MGAIN0 pin = “L”) “000”: 0dB “001”: 0dB “010”: +6dB “011”: +12dB “100”: +18dB “101”: +24dB “110”: +30dB “111”: +36dB PMMP: MPWR pin Power Management “0”: Power-up “1”: Power-down: Hi-z

[AK5373] MS1202-E-00 2010/0 6 - 24 - Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 02H Ext. Audio I/F Control SDOUT SDIN 0 0 0 0 512FS I2S I2S: Audio Format “0”: MSB justified “1”: I2S 512FS: Master Clock Output Frequency “0”: 256fs “1”: 512fs SDIN: Ext. Audio Input Interface Enable “0”: Power-down and Disable: SDTI pin must be connected to VSS1-3. “1”: Power-up and Enable If this bit is set to “1”, the AK5373 receives audio data via the extern al digital audio inte rface and transmits them to the host instead of the A/D data generated by the AK5373. SDOUT: Ext. Audio Output Interface Enable “0”: Power-down and Disable: SDTO pin = “L” “1”: Power-up and Enable If this bit is set to “1”, the A/D data is output via this Interface. Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 03H PCM Format Alt 1 INTFQ12 INTF Q11 INTFQ10 MIX1 RES11 RES10 SIGNED1 STEREO1 04H PCM Format Alt 2 INTFQ22 INTF Q21 INTFQ20 MIX2 RES21 RES20 SIGNED2 STEREO2 05H PCM Format Alt 3 INTFQ32 INTF Q31 INTFQ30 MIX3 RES31 RES30 SIGNED3 STEREO3 06H PCM Format Alt 4 INTFQ42 INTF Q41 INTFQ40 MIX4 RES41 RES40 SIGNED4 STEREO4 07H PCM Format Alt 5 INTFQ52 INTF Q51 INTFQ50 MIX5 RES51 RES50 SIGNED5 STEREO5 08H PCM Format Alt 6 INTFQ62 INTF Q61 INTFQ60 MIX6 RES61 RES60 SIGNED6 STEREO6 09H PCM Format Alt 7 INTFQ72 INTF Q71 INTFQ70 MIX7 RES71 RES70 SIGNED7 STEREO7 STEREO: Mono/Stereo Mode Select “0”: Mono “1”: Stereo SIGNED: Unsigned/Signed Mode Select “0”: Unsigned (“0” is valid only when the resolution is 8 bit) “1”: Signed RES1-0: ADC Resolution Mode Select “00”: 8bit “01”: 16bit “10”: 24bit MIX: ADC Data Mix Control “0”: Lch and Rch are not mixed. “1”: Lch and Rch are mixed. Dynamic range and S/N can be improved by approximately 3dB when the same analog signal is inputted to left and right channels. INTFQ2-0: Initial Sampling Frequency “110”: 48kHz

[AK5373] MS1202-E-00 2010/0 6 - 25 - Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 0AH Sampling Frequency Alt 1 VALID1 FS48K 1 FS44K1 FS32K1 FS22K1 FS16K1 FS11K1 FS8K1 0BH Sampling Frequency Alt 2 VALID2 FS48K 2 FS44K2 FS32K2 FS22K2 FS16K2 FS11K2 FS8K2 0CH Sampling Frequency Alt 3 VALID3 FS48K 3 FS44K3 FS32K3 FS22K3 FS16K3 FS11K3 FS8K3 0DH Sampling Frequency Alt 4 VALID4 FS48K 4 FS44K4 FS32K4 FS22K4 FS16K4 FS11K4 FS8K4 0EH Sampling Frequency Alt 5 VALID5 FS48K 5 FS44K5 FS32K5 FS22K5 FS16K5 FS11K5 FS8K5 0FH Sampling Frequency Alt 6 VALID6 FS48K 6 FS44K6 FS32K6 FS22K6 FS16K6 FS11K6 FS8K6 10H Sampling Frequency Alt 7 VALID7 FS48K 7 FS48K7 FS32K7 FS22K7 FS16K7 FS11K7 FS8K7 FS8K: Sampling Frequency 8kHz Enable “0”: Disable “1”: Enable FS11K: Sampling Frequency 11.025kHz Enable “0”: Disable “1”: Enable FS16K: Sampling Frequency 16kHz Enable “0”: Disable “1”: Enable FS22K: Sampling Frequency 22.05kHz Enable “0”: Disable “1”: Enable FS32K: Sampling Frequency 32kHz Enable “0”: Disable “1”: Enable FS44K: Sampling Frequency 44.1kHz Enable “0”: Disable “1”: Enable FS48K: Sampling Frequency 48kHz Enable “0”: Disable “1”: Enable VALID: Alternate Setting Enable “0”: Disable “1”: Enable Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 11H Endpoint Number 0 0 0 0 0 EPNO2 EPNO1 EPNO0 EPNO2-0: Endpoint Number (1~7)

[AK5373] MS1202-E-00 2010/0 6 - 26 - Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 12H Initial Volume INTVOL7 INTVOL6 INTVOL5 INTVOL4 INTVOL3 INTVOL2 INTVOL1 INTVOL0 13H Minimum Volume MINVOL7 MINVOL6 MINVOL5 MINVOL4 MINVOL3 MINVOL2 MINVOL1 MINVOL0 14H Maximum Volume MAXVOL7 MAXVOL6 MAXVOL5 MAXVOL4 MAXVOL3 MAXVOL2 MAXVOL1 MAXVOL 0 INTVOL7-0: The Value which the AK5373 returns when the host requests the current volume at first time. (Table 10) MINVOL7-0: The Value which the AK5373 returns when the host requests the minimum volume. ( Table 10) MAXVOL7-0: The Value which the AK5373 returns when the host requests the maximum volume. ( Table 10) Addr Register Name D7 D6 D5 D4 D3 D2 D1 D0 15H Mute Control 1 0 0 0 0 OSME ZCE ZTM1 ZTM0 16H Mute Control 2 MHT7 MHT6 MHT5 MHT4 MHT3 MHT2 MHT1 MHT0 ZTM1-0: Zero-crossing timeout period select “00”: 128/fs “01”: 256/fs “10”: 512/fs “11”: 1024/fs ZCE: ADC Digital Volume Zero-crossing enable “0”: Digital Volume changes occur immediately. “1”: Digital Volume changes occur only on zero-crossing or after timeout. OSME: One Shot Mute Enable for LMUTEN, RMUTEN pins “0”: Disable “1”: Enable MHT7-0: One Shot Mute Hold Time 00H: N/A 01H: 1/fs FFH: 255/fs

[AK5373] MS1202-E-00 2010/0 6 - 28 - ■ Descriptors Specification (for example) □ Customizable Block All Descriptor contents are stored in EEP-ROM and customizable with some restrictions. a) Device Descriptor, String Descriptor - Maximum Packet Size - idVendor - idProduct - Manufacturer Name (max. 126bytes) - Product Name (max. 126bytes) - Serial Number (max. 126bytes) - Language ID b) Configuration Descriptor - Power Consumption c) Feature Unit Descriptor: <Active> or < Bypass> - If Feature Unit is not defined in the descriptor, the volume is fixed to the initial value which is described in the EEP-ROM header block d) PCM format (Note that the AK5373 supports 7 sample ra tes even when only 1 sample rate is specified in the descriptor.) e) Endpoint Number f) Maximum Value of Digital Gain g) Minimum Value of Digital Gain h) Initial Value of Digital Gain □ Uncustomizable Block a) Configuration Number (1) b) Interface Number (1) c) Input Terminal ID (1) d) Output Terminal ID (2) e) Feature Unit ID (3) f) Synchronization way (support Synchronous Type) g) Maximum Alternate Setting number (7) h) Endpoint Number (1-7) 1. Device descriptor Offset Field Size Value Description 0 bLength 1 0x12 Size of this descriptor in bytes 1 bDescriptorType 1 0x01 DEVICE descriptor 2 bcdUSB 2 0x0200 2.0 – USB Specification Release Number in Binary-Coded Decimal. 4 bDeviceClass 1 0x00 Device defined at Interface level 5 bDeviceSubClass 1 0x00 Not used. Must be set to 0. 6 bDeviceProtocol 1 0x00 Not used. Must be set to 0. 7 bMaxPacketSize0 1 0x08 8 bytes – Maximum packet size for endpoint zero 8 idVendor 2 0x0556 AKM – Vendor ID (assigned by the USB-IF) 10 idProduct 2 0x0006 AK5373 – Product ID (assigned by the manufacturer) 12 bcdDevice 2 0x0100 1.00 – Device release number in binary-coded decimal 14 iManufacturer 1 0x01 Index of string descriptor describing manufacturer 15 iProduct 1 0x02 Index of string descriptor describing product 16 iSerialNumber 1 0x03 Index of string descriptor describing the device’s serial number 17 bNumConfigurations 1 0x01 One configuration

[AK5373] MS1202-E-00 2010/0 6 - 29 - 2. Configuration Descriptor Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x02 CONFIGURA TION descriptor 2 wTotalLength 2 0x01AF Total length of data returned for this configuration. Includes the combined length of all descriptors returned for this configuration. 4 bNumInterfaces 1 0x02 Two interfaces (Aud io Control Interface and Audio Streaming Interface) 5 bConfigurationValue 1 0x01 Index of this configuration 6 iConfiguration 1 0x00 Null string 7 bmAttributes 1 0x80 Bus Powered Device

8 MaxPower 1 0x32 Power consumption: 100mA

Audio Control Interface Descriptor

3.1 Standard Audio Control Interface descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x00 Index of this interface 3 bAlternateSetting 1 0x00 Index of this setting 4 bNumEndpoints 1 0x00 Endpoint 0 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0x01 AUDIO_CONTROL 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

[AK5373] MS1202-E-00 2010/0 6 - 30 -

3.2 Class-specific Audio Control Interface Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x01 HEADER subtype 3 bcdADC 2 0x0100 1.0 – Audio Device Class specification release number in Binary-Coded Decimal. 5 wTotalLength 2 0x0028 Total size of class-specific Audio Control Interface descriptors (includes this descriptor) 7 bInCollection 1 0x01 Number of streaming interfaces 8 bInterfaceNr(1) 1 0x01 Str eaming interface number 1 belongs to this audio control interface.

3.3 Input Terminal Descriptor

Offset Field Size Value Description 0 bLength 1 0x0C Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 INPUT_TERMINAL subtype 3 bTerminalID 1 0x01 ID of this terminal 4 wTerminalType 2 0x0201 Terminal is Microphone 6 bAssocTerminal 1 0x02 ID of asso ciated Output Terminal is 0x02 7 bNrChannels 1 0x02 Two channels (Stereo) 8 wChannelConfig 2 0x0003 Left/Right Front 10 iChannelNames 1 0x00 Not used. Must be set to 0. 11 iTerminal 1 0x00 Not used. Must be set to 0.

3.4 Output Terminal Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x03 OUTPUT_TERMINAL subtype 3 bTerminalID 1 0x02 ID of this terminal 4 wTerminalType 2 0x0101 USB Streamer 6 bAssocTerminal 1 0x01 ID of as sociate Input Terminal is 0x01 7 bSourceID 1 0x03 From Feature Unit 8 iTerminal 1 0x00 Not used. Must be set to 0.

3.5 Feature Unit Descriptor

Offset Field Size Value Description 0 bLength 1 0x0A Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x06 FEATURE_UNIT descriptor subtype 3 bUnitID 1 0x03 ID of this feature Unit 4 bSourceID 1 0x01 ID to Terminal to which this is connected. 5 bControlSize 1 0x01 Size in bytes of an element of the bmaControl() 6 bmaControls(0) 1 0x01 D0(Mute) is enable for ch 0 7 bmaControls(1) 1 0x02 D1(V olume) is enable for ch 1 (Left) 8 bmaControls(2) 1 0x02 D1(V olume) is enable for ch 2 (Right) 9 iFeature 1 0x00 Not used. Must be set to 0.

[AK5373] MS1202-E-00 2010/0 6 - 31 - 4. Audio Streaming Interface Descriptor

4.1 Zero-bandwidth Alternate Setting

4.1.1 Standard Audio Streaming Interface Descriptor (Alt = 0)

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x00 Index of this setting 4 bNumEndpoints 1 0x00 Endpoints 0 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

4.2 Operational Alternate Setting 1

4.2.1 Standard Audio Streaming Interface Descriptor (Alt = 1: Mono, 8bit, 8k/16k)

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x01 Index of this setting 4 bNumEndpoints 1 0x01 Endpoint 1 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

4.2.2 Class-specific Audio General Interface Descriptor

Offset Field Size Value Description 0 bLength 1 0x07 Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE descriptor 2 bDescriptorSubtype 1 0x01 AS_GENERAL 3 bTerminalLink 1 0x02 Unit ID of terminal (Output Terminal ID) 4 bDelay 1 0x01 Interface delay 5 wFormatTag 2 0x0002 PCM8

[AK5373] MS1202-E-00 2010/0 6 - 32 -

4.2.3 Type I Format Type Descriptor

Offset Field Size Value Description 0 bLength 1 0x0E Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 FORMAT_TYPE 3 bFormatType 1 0x01 FORMAT_TYPE_I 4 bNrChannels 1 0x01 One channel 5 bSubFrameSize 1 0x01 One byte per slot 6 bBitResolution 1 0x08 8 bits 7 bSamFreqType 1 0x02 Two frequencies 8 tSamFreq[0] 3 0x001F40 8000Hz 11 tSamFreq[1] 3 0x003E80 16000Hz

4.2.4 Standard Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x05 ENDPOINT descriptor 2 bEndpointAddress 1 0x81 Endpoint 1, IN direction 3 bmAttributes 1 0x0D Isochronous, synchronous, not shared 4 wMaxPacketSize 2 0x0010 1byte*16sample*1ch=16 byte/frame 6 bInterval 1 0x01 One packet every frame (Must be set to 1) 7 bRefresh 1 0x00 8 bSynchAddress 1 0x00

4.2.5 Class-specific Isochronous Audio Data Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x07 Size of this descriptor in bytes 1 bDescriptorType 1 0x25 CS_ENDPOINT 2 bDescriptorSubtype 1 0x01 GENERAL 3 bmAttributes 1 0x01 Sample rate control 4 bLockDelayUnits 1 0x00 Unused 5 wLockDelay 2 0x0000

4.3 Operational Alternate Setting 2

4.3.1 Standard Audio Streaming Interface Descriptor (Alt = 2: Mono, 16bit, 48k)

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x02 Index of this setting 4 bNumEndpoints 1 0x01 Endpoint 1 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

[AK5373] MS1202-E-00 2010/0 6 - 33 -

4.3.2 Class-specific Audio General Interface Descriptor

4.3.3 Type I Format Type Descriptor

Offset Field Size Value Description 0 bLength 1 0x0B Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 FORMAT_TYPE 3 bFormatType 1 0x01 FORMAT_TYPE_I 4 bNrChannels 1 0x01 One channel 5 bSubFrameSize 1 0x02 Two bytes per slot 6 bBitResolution 1 0x10 16 bits 7 bSamFreqType 1 0x01 One frequency 8 tSamFreq[0] 3 0x00BB80 48000Hz

4.3.4 Standard Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x05 ENDPOINT descriptor 2 bEndpointAddress 1 0x81 Endpoint 1, IN direction 3 bmAttributes 1 0x0D Isochronous, synchronous, not shared 4 wMaxPacketSize 2 0x0060 2byte*48sample*1ch=96 byte/frame 6 bInterval 1 0x01 One packet every frame (Must be set to 1) 7 bRefresh 1 0x00 8 bSynchAddress 1 0x00

4.3.5 Class-specific Isochronous Audio Data Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x07 Size of this descriptor in bytes 1 bDescriptorType 1 0x25 CS_ENDPOINT 2 bDescriptorSubtype 1 0x01 GENERAL 3 bmAttributes 1 0x00 4 bLockDelayUnits 1 0x00 Unused 5 wLockDelay 2 0x0000

[AK5373] MS1202-E-00 2010/0 6 - 34 -

4.4 Operational Alternate Setting 3

4.4.1 Standard Audio Streaming Interface Descriptor (Alt = 3: Mono, 24bit, 32k/44.1k/48k) Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x03 Index of this setting 4 bNumEndpoints 1 0x01 Endpoint 1 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

4.4.2 Class-specific Audio General Interface Descriptor

4.4.3 Type I Format Type Descriptor

Offset Field Size Value Description 0 bLength 1 0x11 Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 FORMAT_TYPE 3 bFormatType 1 0x01 FORMAT_TYPE_I 4 bNrChannels 1 0x01 One channel 5 bSubFrameSize 1 0x03 Three bytes per slot 6 bBitResolution 1 0x18 24 bits 7 bSamFreqType 1 0x03 Three frequencies 8 tSamFreq[0] 3 0x007D00 32000Hz 11 tSamFreq[1] 3 0x00AC44 44100Hz 14 tSamFreq[2] 3 0x00BB80 48000Hz

4.4.4 Standard Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x05 ENDPOINT descriptor 2 bEndpointAddress 1 0x81 Endpoint 1, IN direction 3 bmAttributes 1 0x0D Isochronous, synchronous, not shared 4 wMaxPacketSize 2 0x0090 3byte*48sample*1ch=144 byte/frame 6 bInterval 1 0x01 One packet every frame (Must be set to 1) 7 bRefresh 1 0x00 8 bSynchAddress 1 0x00

[AK5373] MS1202-E-00 2010/0 6 - 35 -

4.4.5 Class-specific Isochronous Audio Data Endpoint Descriptor

4.5 Operational Alternate Setting 4

4.5.1 Standard Audio Streaming Interface Descriptor (Alt = 4: St, 8bit, 8k/11.025k/16k/22.05k) Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x04 Index of this setting 4 bNumEndpoints 1 0x01 Endpoint 1 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

4.5.2 Class-specific Audio General Interface Descriptor

4.5.3 Type I Format Type Descriptor

Offset Field Size Value Description 0 bLength 1 0x14 Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 FORMAT_TYPE 3 bFormatType 1 0x01 FORMAT_TYPE_I 4 bNrChannels 1 0x02 Two channels 5 bSubFrameSize 1 0x01 One byte per slot 6 bBitResolution 1 0x08 8 bits 7 bSamFreqType 1 0x04 Four frequencies 8 tSamFreq[0] 3 0x001F40 8000Hz 11 tSamFreq[1] 3 0x002B11 11025Hz 14 tSamFreq[2] 3 0x003E80 16000Hz 17 tSamFreq[3] 3 0x005622 22050Hz

[AK5373] MS1202-E-00 2010/0 6 - 36 -

4.5.4 Standard Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x05 ENDPOINT descriptor 2 bendpointAddress 1 0x81 Endpoint 1, IN direction 3 bmAttributes 1 0x0D Isochronous, synchronous, not shared 4 wMaxPacketSize 2 0x002E 1byte*23sample*2ch=46 byte/frame 6 bInterval 1 0x01 One packet every frame (Must be set to 1) 7 bRefresh 1 0x00 8 bSynchAddress 1 0x00

4.5.5 Class-specific Isochronous Audio Data Endpoint Descriptor

4.6 Operational Alternate Setting 5

4.6.1 Standard Audio Streaming Interface Descriptor (Alt = 5: St, 16bit, 8k/16k/32k/44.1k/48k) Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x05 Index of this setting 4 bNumEndpoints 1 0x01 Endpoint 1 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

4.6.2 Class-specific Audio General Interface Descriptor

[AK5373] MS1202-E-00 2010/0 6 - 37 -

4.6.3 Type I Format Type Descriptor

Offset Field Size Value Description 0 bLength 1 0x17 Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 FORMAT_TYPE 3 bFormatType 1 0x01 FORMAT_TYPE_I 4 bNrChannels 1 0x02 Two channel 5 bSubFrameSize 1 0x02 Two bytes per slot 6 bBitResolution 1 0x10 16 bits 7 bSamFreqType 1 0x05 Five frequencies 8 tSamFreq[0] 3 0x001F40 8000Hz 11 tSamFreq[1] 3 0x003E80 16000Hz 14 tSamFreq[2] 3 0x007D00 32000Hz 17 tSamFreq[3] 3 0x00AC44 44100Hz 20 tSamFreq[4] 3 0x00BB80 48000Hz

4.6.4 Standard Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x05 ENDPOINT descriptor 2 bEndpointAddress 1 0x81 Endpoint 1, IN direction 3 bmAttributes 1 0x0D Isochronous, synchronous, not shared 4 wMaxPacketSize 2 0x00C0 2byte*48sample*2ch=192 byte/frame 6 bInterval 1 0x01 One packet every frame (Must be set to 1) 7 bRefresh 1 0x00 8 bSynchAddress 1 0x00

4.6.5 Class-specific Isochronous Audio Data Endpoint Descriptor

4.7 Operational Alternate Setting 6

4.7.1 Standard Audio Streaming Interface Descriptor

(Alt = 6: St, 16bit, 8k/11.025k/16k/22.05k /32k/44.1k) Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x06 Index of this setting 4 bNumEndpoints 1 0x01 Endpoint 1 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

[AK5373] MS1202-E-00 2010/0 6 - 38 -

4.7.2 Class-specific Audio General Interface Descriptor

4.7.3 Type I Format Type Descriptor

Offset Field Size Value Description 0 bLength 1 0x1A Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 FORMAT_TYPE 3 bFormatType 1 0x01 FORMAT_TYPE_I 4 bNrChannels 1 0x02 Two channels 5 bSubFrameSize 1 0x02 Two bytes per slot 6 bBitResolution 1 0x10 16 bits 7 bSamFreqType 1 0x06 Six frequencies 8 tSamFreq[0] 3 0x001F40 8000Hz 11 tSamFreq[1] 3 0x002B11 11025Hz 14 tSamFreq[2] 3 0x003E80 16000kHz 17 tSamFreq[3] 3 0x005622 22050Hz 20 tSamFreq[4] 3 0x007D00 32000Hz 23 tSamFreq[5] 3 0x00AC44 44100Hz

4.7.4 Standard Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x05 ENDPOINT descriptor 2 bEndpointAddress 1 0x81 Endpoint 1, IN direction 3 bmAttributes 1 0x0D Isochronous, synchronous, not shared 4 wMaxPacketSize 2 0x00B4 2byte*45sample*2ch=180 byte/frame 6 bInterval 1 0x01 One packet every frame (Must be set to 1) 7 bRefresh 1 0x00 8 bSynchAddress 1 0x00

4.7.5 Class-specific Isochronous Audio Data Endpoint Descriptor

[AK5373] MS1202-E-00 2010/0 6 - 39 -

4.8 Operational Alternate Setting 7

4.8.1 Standard Audio Streaming Interface Descriptor

(Alt = 7: St, 24bit, 8k/11.025k/16k/22.05k /32k/44.1k/48k) Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x04 INTERFACE descriptor 2 bInterfaceNum ber 1 0x01 Index of this interface 3 bAlternateSetting 1 0x07 Index of this setting 4 bNumEndpoints 1 0x01 Endpoint 1 5 bInterfaceClass 1 0x01 AUDIO 6 bInterfaceSubclass 1 0 x02 AUDIO_STREAMING 7 bInterfaceProtocol 1 0x00 No t used. Must be set to 0. 8 iInterface 1 0x00 Null string

4.8.2 Class-specific Audio General Interface Descriptor

4.8.3 Type I Format Type Descriptor

Offset Field Size Value Description 0 bLength 1 0x1D Size of this descriptor in bytes 1 bDescriptorType 1 0x24 CS_INTERFACE 2 bDescriptorSubtype 1 0x02 FORMAT_TYPE 3 bFormatType 1 0x01 FORMAT_TYPE_I 4 bNrChannels 1 0x02 Two channels 5 bSubFrameSize 1 0x03 Three bytes per slot 6 bBitResolution 1 0x18 24 bits 7 bSamFreqType 1 0x07 Seven frequencies 8 tSamFreq[0] 3 0x001F40 8000Hz 11 tSamFreq[1] 3 0x002B11 11025Hz 14 tSamFreq[2] 0x003E80 16000kHz 17 tSamFreq[3] 3 0x005622 22050Hz 20 tSamFreq[4] 0x007D00 32000Hz 23 tSamFreq[5] 3 0x00AC44 44100Hz 26 tSamFreq[6] 3 0x00BB80 48000Hz

4.8.4 Standard Endpoint Descriptor

Offset Field Size Value Description 0 bLength 1 0x09 Size of this descriptor in bytes 1 bDescriptorType 1 0x05 ENDPOINT descriptor 2 bEndpointAddress 1 0x81 Endpoint 1, IN direction 3 bmAttributes 1 0x0D Isochronous, synchronous, not shared 4 wMaxPacketSize 2 0x0120 3byte*48sample*2ch=288 byte/frame 6 bInterval 1 0x01 One packet every frame (Must be set to 1) 7 bRefresh 1 0x00 8 bSynchAddress 1 0x00

[AK5373] MS1202-E-00 2010/0 6 - 40 -

4.8.5 Class-specific Isochronous Audio Data Endpoint Descriptor

[AK5373] MS1202-E-00 2010/0 6 - 41 - 5. String Descriptor

5.1 Language ID (0x00) String Descriptor

Offset Field Size Value Description 0 bLength 1 0x04 Size of this descriptor in bytes 1 bDescriptorType 1 0x03 STRING descriptor 2 bString 2 0x0409 “English(US)” - Language code

5.2 Manufacturer (0x01) String Descriptor

Offset Field Size Value Description 0 bLength 1 0x80 Size of this descriptor in bytes 1 bDescriptorType 1 0x03 STRING descriptor 2 bString 126 0x0041 0x004B 0x0020 0x0020 Manufacturer code (max 126 bytes) “AKM ”

5.3 Product (0x02) String Descriptor

Offset Field Size Value Description 0 bLength 1 0x80 Size of this descriptor in bytes 1 bDescriptorType 1 0x03 STRING descriptor 2 bString 126 0x0041 0x004B 0x0035 0x0033 0x0037 0x0033 0x0020 0x0020 Product code (max 126 bytes) “AK5373 ”

5.4 Serial Number (0x03) String Descriptor

Offset Field Size Value Description 0 bLength 1 0x80 Size of this descriptor in bytes 1 bDescriptorType 1 0x03 STRING descriptor 2 bString 126 0x0041 0x0042 0x0043 0x0044 0x0031 0x0032 0x0033 0x0034 0x0020 0x0020 Serial Number code (max 126 bytes) “ABCD1234 ”

[AK5373] MS1202-E-00 2010/0 6 - 42 - ■ Standard Requests The AK5373 only supports commands mentioned bellow. If unknown commands are input, the device returns a stall. 1. Clear Feature Offset Field Size Value Description 0 bmRequestType 1 0x00 0x02 Device Endpoint 1 bRequest 1 0x01 CLEAR_FEA TURE 2 wValue 2 0x0000 0x0001 Clear ENDPOINT_HALT Clear DEVICE_REMOTE_WAKEUP 4 wIndex 2 0x0000 0x0081 0x0082 0x0083 0x0084 0x0085 0x0086 0x0087 Device or Endpoint 0 Endpoint 1 Endpoint 2 Endpoint 3 Endpoint 4 Endpoint 5 Endpoint 6 Endpoint 7 6 wLength 2 0x0000 Zero 2. Get Configuration Offset Field Size Value Description 0 bmRequestType 1 0x80 1 bRequest 1 0x08 GET_CONFIGURA TION 2 wValue 2 0x0000 4 wIndex 2 0x0000 6 wLength 2 0x0001 One 3. Get Descriptor Offset Field Size Value Description 0 bmRequestType 1 0x80 1 bRequest 1 0x06 GET_DESCRIPTOR 2 wValue 2 0x0100 0x0200 0x0300 0x0301 0x0302 0x0303 Device Descriptor Configuration Descriptor Language ID String Descriptor iManufacturer String Descriptor iProduct String Descriptor iSerial Number String Descriptor 4 wIndex 2 0x0000 0x0409 If wValue is 0x0100, 0x0200 or 0x0300, wIndex is 0x0000. If wValue is 0x0301, 0x0302 or 0x0303, wIndex is Language ID (0x0409: English (US)). 6 wLength 2 0xZZZZ Descriptor Length (ZZZZ is assigned by Host.) 4. Get Interface Offset Field Size Value Description 0 bmRequestType 1 0x81 1 bRequest 1 0x0A GET_INTERFACE 2 wValue 2 0x0000 Zero 4 wIndex 2 0x0000 0x0001 Audio Control Interface Audio Streaming Interface (Alt 0 ~ 7) 6 wLength 2 0x0001 One

[AK5373] MS1202-E-00 2010/0 6 - 43 - 5. Get Status Offset Field Size Value Description 0 bmRequestType 1 0x80 0x81 0x82 Device Interface Endpoint 1 bRequest 1 0x00 GET_STATUS 2 wValue 2 0x0000 Zero 4 wIndex 2 0x0000 0x0001 0x0081 0x0082 0x0083 0x0084 0x0085 0x0086 0x0087 Device, Interface0 or Endpoint 0 Interface 1 Endpoint 1 Endpoint 2 Endpoint 3 Endpoint 4 Endpoint 5 Endpoint 6 Endpoint 7 6 wLength 2 0x0002 Two 6. Set Address Offset Field Size Value Description 0 bmRequestType 1 0x00 1 bRequest 1 0x05 SET_ADDRESS 2 wValue 2 0xZZZZ Device Address (ZZZZ is assigned by Host.) 4 wIndex 2 0x0000 Zero 6 wLength 2 0x0000 Zero 7. Set Configuration Offset Field Size Value Description 0 bmRequestType 1 0x00 1 bRequest 1 0x09 SET_CONFIGURATION 2 wValue 2 0x0001 AK5373 is set to configured state. 4 wIndex 2 0x0000 Zero 6 wLength 2 0x0000 Zero 8. Set Descriptor AK5373 does not support this request. 9. Set Feature Offset Field Size Value Description 0 bmRequestType 1 0x02 Endpoint 1 bRequest 1 0x03 SET_FEATURE 2 wValue 2 0x0000 ENDPOINT_HALT 4 wIndex 2 0x0081 0x0082 0x0083 0x0084 0x0085 0x0086 0x0087 Endpoint 1 Endpoint 2 Endpoint 3 Endpoint 4 Endpoint 5 Endpoint 6 Endpoint 7 6 wLength 2 0x0000 Zero

[AK5373] MS1202-E-00 2010/0 6 - 44 - 10. Set Interface Offset Field Size Value Description 0 bmRequestType 1 0x01 1 bRequest 1 0x0B SET_INTERFACE 2 wValue 2 0x0000 0x0001 0x0002 0x0003 0x0004 0x0005 0x0006 0x0007 Zero-bandwidth Alternate Setting Alternate Setting 1 Alternate Setting 2 Alternate Setting 3 Alternate Setting 4 Alternate Setting 5 Alternate Setting 6 Alternate Setting 7 4 wIndex 2 0x0000 0x0001 Audio Control Interface Audio Streaming Interface 6 wLength 2 0x0000 Zero 11. Sync Frame The AK5373 does not support this request.

[AK5373] MS1202-E-00 2010/0 6 - 45 - ■ Audio Control Requests 1. Set Feature Unit Control Request 1-1. Mute Control Offset Field Size Value Description 0 bmRequestType 1 0x21 1 bRequest 1 0x01 SET_CUR 2 wValue 2 0x0100 MUTE_CONTROL | CHANNEL_0 4 wIndex 2 0x0300 Upper byte: bUnitID field in Feature Unit Control Descriptor (0x03) Lower byte: Audio Control Interface (0x00) 6 wLength 2 0x0001 Length of parameter block The parameter block of mute control is the following. Offset Field Size Value Description 0 bMute 1 0x01 0x00 Mute Not mute 1-2. Volume Control Offset Field Size Value Description 0 bmRequestType 1 0x21 1 bRequest 1 0x01 SET_CUR 2 wValue 2 0x0200 0x0201 0x0202 VOLUME_CONTROL | CHANNEL_0 (Master) VOLUME_CONTROL | CHANNEL_1 VOLUME_CONTROL | CHANNEL_2 4 wIndex 2 0x0300 Upper byte: bUnit ID field in Feature Unit Control Descriptor (0x03) Lower byte: Audio Control Interface (0x00) 6 wLength 2 0x0002 Length of Parameter Block The parameter block of volume control is the following. Offset Field Size Value Description 0 wV olume 2 0xZZZZ The value is mapped to the volume register value. ( Table 10) (ZZZZ is assigned by Host.) If the wVolume exceeds the range, the AK5373 adjusts the value into the range.

[AK5373] MS1202-E-00 2010/0 6 - 46 - 2. Get Feature Unit Control Request 2-1. Mute Control Offset Field Size Value Description 0 bmRequestType 1 0xA1 1 bRequest 1 0x81 GET_CUR 2 wValue 2 0x0100 MUTE_CONTROL | CHANNEL_0 4 wIndex 2 0x0300 Upper byte: bUnitID field in Feature Unit Control Descriptor (0x03) Lower byte: Audio Control Interface (0x00) 6 wLength 2 0x0001 Length of parameter block The parameter block of mute control is the following. Offset Field Size Value Description 0 bMute 1 0x01 0x00 Mute Not mute 2-2. Volume Control Offset Field Size Value Description 0 bmRequestType 1 0xA1 1 bRequest 1 0x81 0x82 0x83 0x84 GET_CUR GET_MIN GET_MAX GET_RES 2 wValue 2 0x0200 0x0201 0x0202 VOLUME_CONTROL | CHANNEL_0 (Master) VOLUME_CONTROL | CHANNEL_1 VOLUME_CONTROL | CHANNEL_2 4 wIndex 2 0x0300 Upper byte: bUnit ID field in Feature Unit Control Descriptor (0x03) Lower byte: Audio Control Interface (0x00) 6 wLength 2 0x0002 Length of Parameter Block The parameter block of volume control is the following. Offset Field Size Value Description 0 wV olume 2 0xZZYY 0x0100 bRequest=GET_CUR, GET_MIN, GET_MAX: ZZ is mapped to the volume register value (Table 10). YY must be 00H. bRequest=GET_RES: 1.0dB

Table 10. Conversion Table of V olume Control

[AK5373] MS1202-E-00 2010/0 6 - 48 - ■ Audio Endpoint Control Request 1. Set Endpoint Control Request Offset Field Size Value Description 0 bmRequestType 1 0x22 1 bRequest 1 0x01 SET_CUR 2 wValue 2 0x0100 Upper byte: SAMPLING_FREQ_CONTROL (0x01) Lower byte: Zero 4 wIndex 2 0x0081 Upper byte: Zero Lower byte: Endpoint Address (0x81) 6 wLength 2 0x0003 Length of parameter block The parameter block of mute control is the following. Offset Field Size Value Description 0 iSampleFreq 3 0xYYYYYY 0x001F40: 8kHz 0x002B11: 11.025kHz 0x003E80: 16kHz 0x005622: 22.05kHz 0x007D00: 32kHz 0x00AC44: 44.1kHz 0x00BB80: 48kHz 2. Get Endpoint Control Request Offset Field Size Value Description 0 bmRequestType 1 0xA2 1 bRequest 1 0x81 GET_CUR 2 wValue 2 0x0100 Upper byte: SAMPLING_FREQ_CONTROL (0x01) Lower byte: Zero 4 wIndex 2 0x0081 Upper byte: Zero Lower byte: Endpoint Address (0x81) 6 wLength 2 0x0003 Length of parameter block The parameter block of mute control is the following. Offset Field Size Value Description 0 iSampleFreq 3 0xYYYYYY 0x001F40: 8kHz 0x002B11: 11.025kHz 0x003E80: 16kHz 0x005622: 22.05kHz 0x007D00: 32kHz 0x00AC44: 44.1kHz 0x00BB80: 48kHz

as suggestions for peripheral circuitry.

12 RSTN

(Nihon Dempa Kogyo) or HC49SFNB16000H0PESZ1 (Kyocera) is recommended.

VSS1-3 must be connected the same ground plane.
All digital input pins must not be left floating.

Figure 21. System Connection Diagram

[AK5373] MS1202-E-00 2010/0 6 - 50 - 1. Grounding and Power Supply Decoupling The AK5373 requires careful attention to power supply and grounding arrangements. A VDD and DVDD are usually supplied from the system’s analog supply. If A VDD and DVDD are supplied separately, th e power-up sequence is not critical. VSS1-3 of the AK5373 must be connected to the analog ground plane. System analog ground and digital ground must be connected together near to where the supplies are brought onto the printed circuit board. Decoupling capacitors must be as near to the AK5373 as possible, with the small value ceramic capacitor being the nearest. 2. Voltage Reference The voltage of VREF is 2.2V (typ) and set the analog input range. VCOM is 50%VREF and a signal ground of this chip. A 4.7μF electrolytic capacitor in parallel with a 0.1μF ceramic capacitor attached to the VREF pin and the VCOM pin eliminates the effects of high frequency noise. No load current may be drawn from the VREF pin and the VCOM pin. All signals, especially clocks, should be kept away from the VREF pin and the VCOM pin in order to avoid unwanted coupling into the AK5373. 3. Analog Inputs The analog inputs are full-differential and input resistance is 20k Ω (typ). The input signal range is typ. ±0.038Vpp Usually the input signal is AC coupled using a capacitor. The cut-off frequency is fc = 1/ (2πRC). The DC offset including the ADC’s own DC offset is removed by the internal HPF (fc=0.93Hz@fs=48kHz). The AK5373 can accept input voltages from VSS1 to VREF.

[AK5373] MS1202-E-00 2010/0 6 - 51 - PACKAGE ■ 48pin LQFP (Unit: mm) 1 12 48 13 7.0 9.0 ± 0.2 7.0 9.0 ± 0.2 0.22 ± 0.08 0.10 S 37 24 25 36 1.40 ± 0.05 0.13 ± 0.13 1.70Max 0° ~ 10° 0.10 M 0.3 ~ 0.75 0.5 0.09 ~ 0.20 ■ Package & Lead frame material Package molding compound: Epoxy, Halogen (bromine and chlorine) free L e a d f r a m e m a t e r i a l : C u Lead frame surface treatment: Solder (Pb free) plate

[AK5373] MS1202-E-00 2010/06 - 52 - MARKING AK5373EQ XXXXXXX 1) Pin #1 indication 2) Date Code: XXXXXXX (7 digits) 3) Marking Code: AK5373EQ 4) Asahi Kasei Logo

[AK5373] MS1202-E-00 2010/06 - 53 -

REVISION HISTORY

Date (YY/MM/DD) Revision Reason Page/Line Contents 10/06/03 00 First Edition IMPORTANT NOTICE z These products and their specifications are subject to change without notice. When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the products. z Descriptions of external circuits, application circuits, software and other related information contained in this document are provided only to illustrate the operation and application examples of the semiconductor products. You are fully responsible for the incorporation of these external circuits, application circuits, software and other related information in the design of your equipments. AKM assumes no responsibility for any losses incurred by you or third parties arising from the use of these information herein. AKM assumes no liability for infringement of any patent, intellectual property, or other rights in the application or use of such information contained herein. z Any export of these products, or devices or systems containing them, may require an export license or other official approval under the law and regulations of the country of export pertaining to customs and tariffs, currency exchange, or strategic materials. z AKM products are neither intended nor authorized for use as critical components Note1) in any safety, life support, or other hazard related device or systemNote2), and AKM assumes no responsibility for such use, except for the use approved with the express written consent by Representative Director of AKM. As used here: Note1) A critical component is one whose failure to function or perform may reasonably be expected to result, whether directly or indirectly, in the loss of the safety or effectiveness of the device or system containing it, and which must therefore meet very high standards of performance and reliability. Note2) A hazard related device or system is one designed or intended for life support or maintenance of safety or for applications in medicine, aerospace, nuclear energy, or other fields, in which its failure to function or perform may reasonably be expected to result in loss of life or in significant injury or damage to person or property. z It is the responsibility of the buyer or distributor of AKM products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the above content and conditions, and the buyer or distributor agrees to assume any and all responsibility and liability for and hold AKM harmless from any and all claims arising from the use of said product in the absence of such notification.

Product Information

AKD5373 specifications and overview.

Summary

24-bit Stereo ADC with USB Interface

Description

24-bit Stereo ADC with USB Interface

Source title AKD5373 Datasheet(PDF) - Asahi Kasei Microsystems

Related Parts

More parts from the same family.

Browse manufacturer