DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Datasheet May 14, 2019 | Subject to change without notice 1 of 14 www.qorvo.com Key Features

  • DC – 6000 MHz
  • +20 dB Gain at 900 MHz
  • +8 dBm Output P1dB at 900 MHz
  • +20 dBm OIP3 at 900 MHz
  • Single Voltage Supply
  • Internally matched to 50 Ω
  • Robust 1000 V ESD, Class 1C
  • Lead-free / Green / RoHS – compliant SOT-363 package Product Overview The AG203-63 is a general -purpose buffer amplifier that offers high dynamic range in a low -cost surface -mount package. At 900 MHz, the AD203 -63 typically provides 20 dB gain, +20 dBm OPI3, and +8 dBm P1dB. The device combines dependable performance with consistent quality to maintain MTTF values exceeding 1000 years at mounting temperatures of +85 °C and is housed in a lead - free / green / RoHS -compliant SOT-363 industry standard SMT package. The AG203-63 consists of a Darlington-pair amplifier using the high reliability InGap / GaAs HBT process technology and only requires DC -blocking capacitors, a bias resistor, and an inductive RF choke for operation. The broadband AG203-63 MMIC amplifier c an be directly applied to various current and next generation wireless technologies such as GPRS, GSM, CDMA, and WCDMA. In addition, the AG203 -63 will work for other various applications from DC to 6 GHz frequency range such as CATV and WiMAX. Functional Block Diagram Top View

Applications

  • Mobile Infrastructure
  • CATV / FTTX
  • WLAN / ISM
  • RFID
  • WiMAX / WiBro Pin Configuration Pin No. Function

3 RF Input

6 RF Output / Bias

1, 2, 4, 5 Ground

Ordering Information

Part No. Description AG203-63G 3,000 pieces on a 7” reel (standard) AG203-63PCB 700 - 2400 MHz Assembled Evaluation Board

Datasheet May 14, 2019 | Subject to change without notice 2 of 14 www.qorvo.com Recommended Operating Conditions Parameter Min Typ Max Units DC Supply Voltage +4.75 +5 +5.25 V TCASE −40 +85 °C TCASE, Operational −55 +105 °C TJ for 106 hours MTTF +177 °C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Absolute Maximum Ratings Parameter Rating Storage Temperature −55 °C to +125 °C Device Voltage (VDEVICE) +4.5 V RF Input Power, CW, 50 Ω, T=25 °C +10 dBm Junction Temperature 177 °C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Parameter Conditions (1) Min Typ Max Units Operational Frequency Range DC 6000 MHz Test Frequency 900 MHz Gain 19.7 dB Input Return Loss 20 dB Output Return Loss 16 dB Output P1dB +8 dBm Output IP3 Pout = -10 dBm/tone, ∆f = 10 MHz +20.1 dBm Output IP2 +24 dBm Noise Figure 3.0 dB Test Frequency 1900 MHz Gain 16.8 17.8 18.8 dB Output P1dB +7.4 dBm Output IP3 Pout = -10 dBm/tone, ∆f = 10 MHz +19.7 dBm Device Voltage 4.05 V Device Current 20 mA Thermal Resistance, θjc Junction to case 472 °C/W Notes: 1. Test conditions unless otherwise noted: Supply Voltage = +5.0 V, RBIAS = 47.5 Ω, Temp = +25 °C, 50 Ω system.

Datasheet May 14, 2019 | Subject to change without notice 3 of 14 www.qorvo.com Typical Performance Parameter Typical Units Frequency 100 500 900 1900 2140 2400 3500 5800 MHz Notes: 1. Test conditions unless otherwise stated: Supply Voltage = +5 V, VDEVICE = +4.05V, RBIAS = 47.5 Ω ICC = 20 mA, T = 25 ºC, 50 Ω system 2. The OIP3 measured with two tones at an output power of -10 dBm / tone separated by 10 MHz. The suppression on the largest IMD3 product is used to calculate the OIP3 using a 2:1 rule. 3. Data is shown as device performance only. Actual implementation for the desired frequency band will be determined by external components shown in the application circuit. Optimal Operating Bias Point for Typical Performance

Datasheet May 14, 2019 | Subject to change without notice 4 of 14 www.qorvo.com S-Parameters Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) Test conditions unless otherwise noted: VDEVICE = +4.05 V, ICC = 20 mA, T = 25 °C, calibrated reference planes to device leads

Datasheet May 14, 2019 | Subject to change without notice 5 of 14 www.qorvo.com

700 MHz to 2400 MHz Evaluation Board – AG203-63PCB

Bill of Material – AG203-63PCB, 700 MHz to 2400 MHz Reference Des. Value Description Manuf. Part Number n/a n/a Printed Circuit Board Qorvo U1 n/a Amplifier, AG203-63G Qorvo AG203-63G L1 39 nH Inductor, 39 nH, Wire wound, 0603, RF Choke various C1, C2 56 pF Capacitor, 56 pF, Chip, 0603, DC Blocking various C3 0.018 µF Capacitor, 0.018 µF, Chip, 0603, Bypass various C4 Capacitor, Not Place, Bypass R1 47.5  Resistor, 47.5 , 1%, 0603, Bias various Notes: This BOM configuration provides optimum broadband performance of the fully assembled evaluation board shipped from Qorvo. Component Values for Specific Frequencies Frequency 50 MHz 500 MHz 900 MHz 1900 MHz 2200 MHz 2500 MHz 3500 MHz L1 820 nH 220 nH 68 nH 27 nH 22 nH 18 nH 15 nH C1, C2, C4 .018 µF 1000 pF 100 pF 68 pF 68 pF 56 pF 39 pF Bias Resistor Values for Specific Supply Voltages VSUPPLY 5 V 6 V 7 V 8 V 9 V 10 V 12 V R1 47.5  98  148  198  248  298  398  Component Size 0603 0603 0805 0805 1206 1210 1210 Notes: The R1 is for bias and its stability over temperature. The minimum VSUPPLY is +5 V. An 1% tolerance resistor is recommended.

Datasheet May 14, 2019 | Subject to change without notice 6 of 14 www.qorvo.com Performance Plots, +5 V Supply Voltage Test conditions unless otherwise stated: Supply Voltage = +5 V, VDEVICE = +4.05V, RBIAS = 47.5 Ω ICC = 20 mA, T = 25 ºC, 50 Ω system

Datasheet May 14, 2019 | Subject to change without notice 7 of 14 www.qorvo.com Performance Plots, +5 V Supply Voltage (continue) Test conditions unless otherwise noted: Supply Voltage = +5 V, VDEVICE = +4.05V, RBIAS = 47.5 Ω ICC = 20 mA, T = 25 ºC, 50 Ω system

Datasheet May 14, 2019 | Subject to change without notice 8 of 14 www.qorvo.com Performance Plots, +6 V Supply Voltage Test conditions unless otherwise stated: Supply Voltage = +6 V, VDEVICE = +4.05V, RBIAS = 98 Ω ICC = 20 mA, T = 25 ºC, 50 Ω system

Datasheet May 14, 2019 | Subject to change without notice 9 of 14 www.qorvo.com Performance Plots, +8 V Supply Voltage Test conditions unless otherwise stated: Supply Voltage = +8 V, VDEVICE = +4.05V, RBIAS = 198 Ω ICC = 20 mA, T = 25 ºC, 50 Ω system

Datasheet May 14, 2019 | Subject to change without notice 10 of 14 www.qorvo.com Package Marking and Dimensions Marking: HXX H – Designator XX – 2 Digit Lot Code Notes: 1. All dimensions are in millimeters with (inches). Angles are in degrees. 2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.

Datasheet May 14, 2019 | Subject to change without notice 11 of 14 www.qorvo.com PCB Mounting Land Pattern Notes: 1. Ground / thermal via holes are critical for the proper performance of this device. Via holes should use a 0.35 mm (#80 / .0135”) diameter drill and have a final plated thru diameter of 0.25 mm (0.010”). 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added near the part to fasten the board to a heatsink. Ensure that the ground / thermal via region contacts the heatsink. 4. No solder mask on the backside of the PC board in the region where the board contacts the heatsink. 5. RF trace width depends upon the PC board material and construction. 6. Use 1 oz. Copper minimum. 7. All dimensions are in millimeters (inches). Angles are in degrees.

Datasheet May 14, 2019 | Subject to change without notice 12 of 14 www.qorvo.com Tape and Reel Information – Carrier and Cover Tape Dimensions Feature Measure Symbol Size (in) Size (mm) Cavity Length A0 0.089 2.25 Width B0 0.094 2.40 Depth K0 0.047 1.20 Pitch P1 0.157 4.00 Centerline Distance Cavity to Perforation - Length Direction P2 0.079 2.00 Cavity to Perforation - Width Direction F 0.138 3.50 Cover Tape Width C 0.213 5.40 Carrier Tape Width W 0.315 8.00

Datasheet May 14, 2019 | Subject to change without notice 13 of 14 www.qorvo.com Tape and Reel Information – Reel Dimensions Standard T/R size = 3,000 pieces on a 7” reel. Feature Measure Symbol Size (in) Size (mm) Flange Diameter A 6.969 177.0 Thickness W2 0.559 14.2 Space Between Flange W1 0.346 8.8 Hub Outer Diameter N 2.283 58.0 Arbor Hole Diameter C 0.512 13.0 Key Slit Width B 0.079 2.0 Key Slit Diameter D 0.787 20.0 Tape and Reel Information – Tape Length and Label Placement Notes: 1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481-1-A. 2. Labels are placed on the flange opposite the sprockets in the carrier tape.

Datasheet May 14, 2019 | Subject to change without notice 14 of 14 www.qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) Class 1C ESDA / JEDEC JS-001-2012 ESD – Charged Device Model (CDM) Class C3 JEDEC JESD22-C101F MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Solderability Solder profiles available upon request. Contact plating: Matte Tin RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes:

  • Lead Free
  • Halogen Free (Chlorine, Bromine)
  • Antimony Free
  • TBBP-A (C15H12Br402) Free
  • PFOS Free
  • SVHC Free Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2019 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com For technical questions and application information: Email: appsupport@qorvo.com Pb