A9625 MAT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
High Sensitivity Differential Hall Effect Gear Tooth Sensor 031023 www.masteranalog.com Page 1 of 2 RD-30048 Rev 1.00 A9625 is a typical and effective on gear tooth sensor of the Hall Effect IC. Absolute Maximum Ratings At (TA=25℃) Characteristics Values Unit Supply Voltage (VDD) 30 V Output V oltage, (VOUT) 30 V Output current, (ISINK) 40 mA Operating Temperature Range, (TA) -40 ~+150 ℃ Storage Temperature Range, (TS) -65 ~ +175 ℃ Package Power Dissipation, (PD) 790 mW Functional Block Diagram Voltage Regulator Amp VDD Out VSS Hall Sensor ADC Filter Electrical Specifications DC Operating Parameters： T A=+25℃, VDD=5V Parameters Test Conditions Min Typ Max Units Supply V oltage, (VDD) Operating 3.8 24.0 V Supply Current, (IDD) Operating 3.5 5.0 mA Output Saturation V oltage, (VDSON) IOUT=20mA 150 400 mV Output Leakage Current, (Ioff) VOUT = 24V 10.0 uA Output Rise Time, (TR) RL=1KΩ, CL =20pF 0.2 uS Output Fall Time, (TF) RL=1KΩ; CL =20pF 0.2 uS Max Cut-off Frequency -3dB 20 kHz Electro-Static Discharge HBM 4 KV Difference, (BDIFF) f=1kHz -1000 +1000 Gauss Operate Point, (BOP) f=1kHz, BDIFF increasing 3 4.5 6 Gauss Release Point, (BRP) f=1kHz, BDIFF increasing -3 -4.5 -6 Gauss Hysteresis, (BHYS) |BOP - BRP| 9 Gauss DMOS Gear Tooth Sensor Supply Voltage 3.8 ~ 24V Hysteresis
9 Gauss
SIP-4(I4) Masteranalog
High Sensitivity Differential Hall Effect Gear Tooth Sensor 031023 www.masteranalog.com Page 2 of 2 RD-30048 Rev 1.00 Package Dimension and Sensor Location (Top View) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Do not bend leads within 1 mm of lead to package interface. 4. PINOUT: Pin No. Pin Name Function
1 VDD Power Supply
2 VOUT Output
3 VSS Ground
4 VSS Ground
Measurement Method Masteranalog