A1183 MAT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Low Sensitivity Hall Effect Latch 050523 www.masteranalog.com Page 1 of 2 RD-30049 Rev 1.00 A1183 is a hall latch which has features as low current consumption, low sensitivity and wide operating voltage range.  Absolute Maximum Ratings At (TA=25℃) Characteristics Values Unit Supply Voltage, (VDD) 28 V Output V oltage, (VOUT) 28 V Output Current, (ISINK) 50 mA Operating Temperature Range, (TA) -40 ~+125 ℃ Storage Temperature Range, (TS) -65 ~ +150 ℃ Package Power Dissipation, (PD) 606 / 230 mW  Functional Block Diagram Voltage Regulator Amp VDD Out GND Hall Sensor  Electrical Specifications DC Operating Parameters： T A=+25℃, VDD=12V Parameters Test Conditions Min Typ Max Units Supply V oltage, (VDD) Operating 2.5 26.0 V Supply Current, (IDD) B<BOP 5.0 mA Output Saturation V oltage, (VDSON) IOUT =20mA, B>BOP 400.0 mV Output Leakage Current, (IOFF) IOFF B<BRP, VOUT = 12V 10.0 uA Output Switch Frequency, (FSW) 3 kHz Output Rise Time, (TR) RL=1KΩ, CL=20pF 0.45 uS Output Fall Time, (TF) RL=1KΩ; CL=20pF 0.45 uS Electro-Static Discharge HBM 4 KV Operate Point, (BOP) I3(S3) 100(-200) 200(-100) Gauss Release Point, (BRP) I3(S3) -200(100) -100(200) Gauss Hysteresis, (BHYS) |BOP - BRP| 150 Gauss DMOS Hall Effect Latch Supply Voltage 2.5 ~ 26V BOP：150 Gauss BRP：-150 Gauss Output Open Drain Package SIP-3(I3) SOT-23(S3) Masteranalog

Low Sensitivity Hall Effect Latch 050523 www.masteranalog.com Page 2 of 2 RD-30049 Rev 1.00  Package Dimension and Sensor Location (Top View) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Do not bend leads within 1 mm of lead to package interface. 4. PINOUT: Pin No. Pin Name Function

1 VDD Power Supply

2 VSS Ground

3 VOUT Output

(Top View) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Lead thickness after solder plating will be 0.254mm maximum 4. PINOUT: Pin No. Pin Name Function

2 VOUT Output

3 VSS Ground

  1. (For reference only)Land Pattern Masteranalog