A1168 MAT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Ultra-High Sensitivity Hall Effect Latch 041824 www.masteranalog.com Page 1 of 2 RD-30082 Rev 1.00 A1168 is a hall latch which has features as low current consumption, ultra-high sensitivity and fast response time. Absolute Maximum Ratings At (TA=25℃) Characteristics Values Unit Supply Voltage, (VDD) 27 V Output V oltage, (VOUT) 27 V Output Current, (ISINK) 40 mA Operating Temperature Range, (TA) -40 ~+125 ℃ Storage Temperature Range, (TS) -50 ~ +125 ℃ Package Power Dissipation, (PD) 606 / 230 mW Functional Block Diagram Voltage Regulator Amp VDD Out Vss Hall Sensor Hall Sensor ICO Electrical Specifications DC Operating Parameters： T A=+25℃, VDD=12V Parameters Test Conditions Min Typ Max Units Supply V oltage, (VDD) Operating 2.5 26.0 V Supply Current, (IDD) B<BOP 1.6 mA Output Saturation V oltage, (VDSON) IOUT=10mA, B>BOP 400.0 mV Output Leakage Current, (IOFF) IOFF B<BRP, VOUT = 12V 10.0 uA Output Limited Current, (ICO) B>BOP 40 mA Output Switch Frequency, (FSW) 40 kHz Output Rise Time, (TR) RL=1kΩ, CL =20pF 0.5 us Output Fall Time, (TF) RL=1kΩ; CL =20pF 0.02 us Electro-Static Discharge HBM 6 kV Operate Point, (BOP) I3(S3) 10(-30) 30(-10) Gauss Release Point, (BRP) I3(S3) -30(10) -10(30) Gauss Hysteresis, (BHYS) |BOP - BRP| 40 Gauss DMOS Hall Effect Latch Supply Voltage 2.5 ~ 26V BOP：20 Gauss BRP：-20 Gauss Output Open Drain Package SIP-3(I3) SOT-23(S3) Masteranalog
Ultra-High Sensitivity Hall Effect Latch 041824 www.masteranalog.com Page 2 of 2 RD-30082 Rev 1.00 Package Dimension and Sensor Location (Top View) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Do not bend leads within 1 mm of lead to package interface. 4. PINOUT: Pin No. Pin Name Function
1 VDD Power Supply
2 VSS Ground
3 VOUT Output
(Top View) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Lead thickness after solder plating will be 0.254mm maximum 4. PINOUT: Pin No. Pin Name Function