A1175 MAT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Low Operating Voltage Ultra High Sensitivity Hall Effect Latch 101723 www.masteranalog.com Page 1 of 3 RD-30080 Rev 1.00 A1175 is a hall latch which has features as low operating voltage, ultra high sensitivity and an economical and general purpose. Absolute Maximum Ratings At (TA=25℃) Characteristics Values Unit Supply Voltage, (VDD) 7.0 V Output V oltage, (VOUT) 7.0 V Output Current, (ISINK) 10 mA Operating Temperature Range, (TA) -40 ~+125 ℃ Storage Temperature Range, (TS) -65 ~ +150 ℃ Package Power Dissipation, (PD) 606 / 230 / 416 mW Functional Block Diagram Electrical Specifications DC Operating Parameters： T A=+25℃, VDD=5V Parameters Test Conditions Min Typ Max Units Supply V oltage, (VDD) Operating 1.8 6.0 V Supply Current, (IDD) B<BOP 5.0 7.0 mA Output Saturation V oltage, (VDSON) IOUT=5mA, B>BOP 400.0 mV Output Leakage Current, (IOFF) IOFF B<BRP, VOUT = 5.0V 10.0 uA Output Switch Frequency, (FSW) 3 kHz Output Rise Time, (TR) RL=1kΩ, CL =20pF 2.00 us Output Fall Time, (TF) RL=1kΩ; CL =20pF 0.15 us Electro-Static Discharge HBM 4 kV Operate Point, (BOP) I3/D4(S3) 5(-25) 25(-5) Gauss Release Point, (BRP) I3/D4(S3) -25(5) -5(25) Gauss Hysteresis, (BHYS) |BOP - BRP| 30 Gauss CMOS Hall Effect Latch Supply Voltage 1.8 ~ 6.0V BOP：15 Gauss BRP：-15 Gauss Output Open Drain Package SIP-3(I3) SOT-23(S3) DFN1010-4(D4) Voltage Regulator Amp VDD Out GND Hall Sensor Masteranalog
Low Operating Voltage Ultra High Sensitivity Hall Effect Latch 101723 www.masteranalog.com Page 2 of 3 RD-30080 Rev 1.00 Package Dimension and Sensor Location (Top View) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Do not bend leads within 1 mm of lead to package interface. 4. PINOUT: Pin No. Pin Name Function
1 VDD Power Supply
2 VSS Ground
3 VOUT Output
(Top View) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Lead thickness after solder plating will be 0.254mm maximum 4. PINOUT: Pin No. Pin Name Function
2 VOUT Output
3 VSS Ground
- (For reference only) Land Pattern Masteranalog
Low Operating Voltage Ultra High Sensitivity Hall Effect Latch 101723 www.masteranalog.com Page 3 of 3 RD-30080 Rev 1.00 NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Lead thickness after solder plating will be 0.254mm maximum 4. PINOUT: Pin No. Pin Name Function 3 N.C N.C
4 VOUT Output
5 N.C Heat sink*1 *1：Pin5 suggest connect to Ground. 5. (For reference only)Land Pattern Masteranalog