A2163 MAT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Large Current Output High Sensitivity Hall Effect Latch 050423 www.masteranalog.com Page 1 of 2 RD-30028 Rev 1.22 A2163 has high sensitivity and large current totem pole output signal on latch function of the Hall IC.  Absolute Maximum Ratings At (TA=25℃) Characteristics Values Unit Supply Voltage, (VDD) 28 V Output V oltage, (VOUT) 28 V Output Current, (ISINK) 100 mA Operating Temperature Range, (TA) -40 ~+125 ℃ Storage temperature Range, (TS) -65 ~ +150 ℃ Package Power Dissipation, (PD) 606 / 230 mW  Functional Block Diagram  Electrical Specifications DC Operating Parameters: T A=+25℃, VDD=12V Parameters Test Conditions Min Typ Max Units Supply V oltage, (VDD) Operating 3.5 24.0 V Supply Current, (IDD) B<BOP 3.5 8.0 mA Output High V oltage, (VOH) IOUT=50mA (Source) VDD-0.2 V Output Low V oltage, (VOL) IOUT=50mA (Sink) 0.2 mV Output Switch Frequency, (FSW) N-->S, S-->N 3 kHz Output Rise Time, (TR) CL=20pF 0.2 uS Output Fall Time, (TF) CL=20pF 0.2 uS Electro-Static Discharge HBM 4 KV Operate Point, (BOP) I3(S3) 0 60 Gauss Release Point, (BRP) I3(S3) -60 0 Gauss Hysteresis, (BHYS) |BOP - BRP| 60 Gauss CMOS Hall Effect Latch Supply Voltage 3.5 ~ 24V BOP:30 Gauss BRP:-30 Gauss Output Open Drain Package SIP-3(I3) SOT-23(S3) Voltage Regulator Amp VDD GND Hall Sensor Out Thermal shut-down Masteranalog

Large Current Output High Sensitivity Hall Effect Latch 050423 www.masteranalog.com Page 2 of 2 RD-30028 Rev 1.22  Package Dimension and Sensor Location (Top VieW) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Do not bend leads within 1 mm of lead to package interface. 4. PINOUT: Pin No. Pin Name Function

1 VDD Power Supply

2 VSS Ground

3 VOUT Output

(Top VieW) NOTES: 1. Controlling dimension: mm 2. Leads must be free of flash and plating voids 3. Lead thickness after solder plating will be 0.254mm maximum 4. PINOUT: Pin No. Pin Name Function

2 VOUT Output

3 VSS Ground