DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

1575 MHz BAW Filter

DATA SHEET: November 2017 Rev. D Subject to change without notice - 1 of 6 - www.qorvo.com CSP: 3.26 X 1.60 X 0.84 mm Product Features

  • Usable bandwidth 30 MHz
  • Single-ended operation
  • Ceramic Chip-Scale Package (CSP)
  • Hermetically sealed
  • Small Package: 3.26 x 1.60 x 0.84 mm

Applications

  • Civil and Defense GPS Receivers
  • L-Band General Description The 880273 is a dual -use GPS L1 BAW bandpass filter in a small hermetic package. The filter’s 30 MHz bandwidth allows reception of both M -code and Y -code signals. It is optimized for low insertion loss and high rejection. Functional Block Diagram Bottom View Pin Configuration - Single Ended Pin No. Label I/O Input / Output GND Ground Ordering Information Part No. Description 880273 1575 MHz BAW Filter 880273-EVB Evaluation board I/O I/O GND

DATA SHEET: November 2017 Rev. D Subject to change without notice - 2 of 6 - www.qorvo.com Absolute Maximum Ratings Parameter Rating Storage Temperature (1) −55 to +100 °C Operable Temperature (2) −40 to +85 °C RF Input Power TBD Notes: 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Specifications are not guaranteed over all operable conditions Electrical Specifications (1) Test conditions unless otherwise noted: (2) Temp = −40 to +85 °C Parameter (3) Conditions Min Typical (4) Max Units 10 dB Center Frequency 1570 1575 1580 MHz Insertion Loss @ Fo - 2.35 3.75 dB 3 dB Bandwidth (5) 40 45 - MHz 40 dB Bandwidth (5) - 120 140 MHz Amplitude Variation (6) 1565 – 1585 MHz - 1.2 2 dB Input / Output VSWR @ Fo - 1.8:1 2.2:1 Source Impedance (7) Single-ended - 50 - Ω Load Impedance (7) Single-ended - 50 - Ω Notes: 1. All specifications are based on the Qorvo schematics for the reference designs shown on page 3. 2. In production, devices will be tested at room temperature to a guard banded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 4. Typical values are based on average measurements at room temperature 5. Referenced to the insertion loss at the center frequency 6. Measured as maximum peak to adjacent valley amplitude variation over frequency range 7. This is the optimum impedance in-order to achieve the performance shown

DATA SHEET: November 2017 Rev. D Subject to change without notice - 3 of 6 - www.qorvo.com PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. Notes: Matching Schematics 50  Single-ended Input 50  Single-ended Output I/O 50 50  I/O GND

DATA SHEET: November 2017 Rev. D Subject to change without notice - 4 of 6 - www.qorvo.com Typical Performance Test conditions unless otherwise stated: Temp. = 25 °C -80 -70 -60 -50 -40 -30 -20 -10 0 1000 2000 3000 4000 5000 6000 S21 (dB) Frequency (MHz) Amplitude Response -20 -16 -12 1415 1455 1495 1535 1575 1615 1655 1695 1735 1775 Return Loss (dB) Frequency (MHz) Return Loss S11 S22

DATA SHEET: November 2017 Rev. D Subject to change without notice - 5 of 6 - www.qorvo.com Package Information, Marking and Dimensions Package Style: CSP Dimensions: 3.26 x 1.60 x 0.84 mm Body: Sapphire Package: Alumina Terminations: Au plating 0.5 – 1.0μm, over a 2-6μm Ni plating All dimensions shown are nominal in millimeters All tolerances are ±0.13mm except overall length and width ±0.25mm The date code consists of, YY = last 2 digits of the year, and WW = 2 digits of worked week Tape and Reel Information Tape and reel available upon request (EIA-481)

DATA SHEET: November 2017 Rev. D Subject to change without notice - 6 of 6 - www.qorvo.com Solderability Solder profiles available upon request. Refer to Soldering Profile for recommended guidelines RoHS Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes:

  • Lead Free
  • Halogen Free (Chlorine, Bromine)
  • Antimony Free
  • TBBP-A (C15H12Br402) Free
  • PFOS Free
  • SVHC Free
  • Qorvo Green Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com For technical questions and application information: Email: appsupport@qorvo.com Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) Class 2 ANSI/ ESD / JEDEC JS-001 ESD – Charged Device Model (CDM) Class C3 ANSI/ ESD / JEDEC JS-002 MSL – Moisture Sensitivity Level Level 1 IPC/JEDEC J-STD-020 Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.