XCL101 TOREX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 19

Technical content

Inductor Built-in Step-up “micro DC/DC” Converter 100 0.01 0.1 1 10 100 1000 Output Current:IOUT (m A) Efficiency:EFFI(%) 3.6V VOUT=5.0V 4.2V VIN= 3.0V 7L 1 8L 2 3 4 6Lx VOUT VBAT CE NC VSS CIN 10μF CL 10μF VIN VOUT VCE ■TYPICAL PERFORMANCE CHARACTERISTICS ☆GreenOperation Compatible

  • Wearable devices
  • Mobile phones, Smart phones
  • Mouses, Keyboards
  • Remote controls
  • Portable information devices
  • Game consoles Input Voltage Range : 0.9V~5.5V Output Voltage Range : 1.8V~5.0V (±2.0%) 0.1V increment Output Current : 100mA ＠VOUT=3.3V, VBAT=1.8V (TYP.) S u p p l y C u r r e n t : 6 . 3μA (VBAT=VOUT+0.5V) C o n t r o l M e t h o d : PFM Control PFM Switching Current : 350mA Functions : Load Disconnection Function or Bypass Mode Function Ceramic Capacitor Compatible Operating Ambient Temperature :- 4 0 ºC ~ +85ºC Package : CL-2025, CL-2025-02 Environmentally Friendly : EU RoHS Compliant, Pb Free ■TYPICAL APPLICATION CIRCUIT ETR28004-003 ■GENERAL DESCRIPTION The XCL101 series is a synchronous step-up micro DC/DC converter which integrates an inductor and a control IC in one tiny package (2.5mm×2.0mm, H=1.0mm). A stable step-up power supply is configured using only two capacitors connected externally. An internal coil simplifies the circuit and enables minimization of noise and other operational trouble due to the circuit wiring. The XCL101 series can be used in applications that start from a single alkaline or nickel-metal hydride battery PFM control enables a low quiescent current, making these products ideal for portable devices that require high efficiency. The XCL101 features a load disconnect function to break continuity between the input and output at shutdown (XCL101A), and a bypass mode function to maintain continuity between the input and output (XCL101C). XCL101C501BR-G (TOP VIEW) “L1 and Lx”, “L2 and VBAT” is connected by PCB pattern. XCL101 Series ■APPLICATIONS ■FEATURES

Amp. Load Disconnection Controller CE and Bypass Controller Logic PFM Comparator Synch Buffer Drive LX VBAT VOUT Current Sense Logic VREF CFB Inductor VSS L2 L1 PFM Controller Logic VDD CE ■BLOCK DIAGRAM XCL101A / XCL101C ■PRODUCTION CLASSIFICATION

  • Ordering Information XCL101①②③④⑤⑥-⑦(*1) PFM control DESIGNATOR ITEM SYMBOL DESCRIPTION ① Product Type A Load Disconnection C VBAT Bypass ②③ Output Voltage 18 ～50 Output Voltage e.g. VOUT=1.8V ⇒ ②=1、③=8 ④ Oscillation Frequency 1 1.2MHz ⑤⑥-⑦ Package (Order Unit) BR-G(*2) CL-2025 (3,000/Reel) ER-G(*3) CL-2025-02 (3,000/Reel) * Diodes inside the circuits are ESD protection diodes and parasitic diodes. (*1)The “-G” suffix denotes Halogen and Antimony free as well as being fully EU RoHS compliant. (*2) BR-G is storage temperature range "-40 ℃ ~ + 105 ℃". (*3) ER-G is storage temperature range "-40 ℃ ~ + 125 ℃".

2 VOUT

3 VBAT

■PIN CONFIGURATION ■PIN ASSIGNMENT ■CE PIN FUNCTION PIN NAME SIGNAL STATUS CE H Operation (All Series) L XCL101A Series：Stand-by XCL101C Series：Bypass Mode ■ ABSOLUTE MAXIMUM RATINGS PIN NUMBER PIN NAME FUNCTIONS

1 L X Switching

2 V OUT Output Voltage

3 V BAT Power Input

4 CE Chip Enable

5 NC No Connection

6 V SS Ground

7 L1 Inductor Electrodes 8 L2

PARAMETER SYMBOL RATINGS UNITS VBAT Pin Voltage V BAT -0.3 ～ +7.0 V LX Pin Voltage V LX -0.3 ～ V OUT+0.3 or +7.0 (*1) V VOUT Pin Voltage V OUT -0.3 ～ +7.0 V CE Pin Voltage V CE -0.3 ～ +7.0 V LX Pin Current I LX 700 mA Power Dissipation Pd 1000 (*2) mW Operating Ambient Temperature Topr - 40 ～ +85 ºC Storage Temperature(*3) CL-2025 Tstg - 40 ～ +105 ºC CL-2025-02 - 40 ～ +125 ºC * If the dissipation pad needs to be con nected to other pins, it should be connected to the VSS pin. * Please refer to pattern layout page for the connecting to PCB. (BOTTOM VIEW) Ta=25ºC * Please do not leave the CE pin open. All voltages are described based on the GND. (*1) The maximum value should be either VOUT+0.3V or +7.0V in the lowest. (*2) The power dissipation figure shown is PCB mounted (40mm x 40mm, t=1.6mm, Glass Epoxy FR-4). (*3) Storage temperature, are divided by the product specification of the package.

■ELECTRICAL CHARACTERISTICS XCL101Axx1BR-G/XCL101Axx1ER-G Unless otherwise stated, VBAT= VCE= 1.5V (*1) VOUT(T) =Nominal Output Voltage (*2) VOUT(E) =Effective Output Voltage The actual output voltage value VOUT(E) is the PFM comparator threshold voltage in the IC. Therefore, the DC/DC circuit output voltage, including the peripheral components, is boosted by the ripple voltage average value. Please refer to the characteristic example. (*3) LX SW “Pch” ON resistance =（VLX-VOUTpin measurement voltage） / 200mA (*4) LX SW “Nch” ONresistance measurement method is shown in the measurement circuit diagram. PARAMETER SYMBOL CONDITIONS MIN. TYP . MAX. UNITS CIRCUIT Input Voltage V BAT - - - 5.5 V - Output Voltage V OUT(E)(*2) VPULL=1.5V, Voltage to strat oscillation while VOUT is decreasing <E1> V ① Operation Start Voltage V ST1 I OUT=1mA - - 0.9 V ② Operation Hold Voltage V HLD R L=1kΩ - 0.7 - V ② Supply Current Iq Oscillation stops, VBAT=VCE=1.5V VOUT=VOUT(T) (*1) +0.5V <E2> μA ③ Input Pin Current I BAT V OUT=VOUT(T) (*1)+0.5V - 0.25 1.0 μA ③ Stand-by Current I STB V BAT=VLX=VOUT(T) (*1), VOUT=VCE=0V - 0.1 1.0 μA ④ LX Leak Current I LXL V BAT=VLX=VOUT(T) (*1), VOUT=VCE=0V - 0.1 1.0 μA ⑤ PFM Switching Current I PFM I OUT=3mA 295 350 405 mA ② LX SW “Pch” ON Resistance (*3) RLXP VBAT=VCE=VLX=VOUT(E) (*2)+ 0.5V, IOUT=200mA <E3> Ω ⑦ LX SW “Nch” ON Resistance (*4) RLXN V BAT=VOUT(E) (*2)=3.3V, VOUT=1.7V - 0.6 - Ω ⑧ CE “High” Voltage V CEH VBAT=VPULL=1.5V VOUT=VOUT(T) (*1)×0.98V While VCE= 0.3→0.75V, Voltage to start oscillation 0.75 - 5.5 V ① CE “Low” Voltage V CEL VBAT=VPULL=1.5V VOUT=VOUT(T) (*1)× 0.98V While VCE=0.75 → 0.3V, Voltage to stop oscillation VSS - 0.3 V ① CE “High” Current I CEH V BAT=VCE=VLX=VOUT=5.5V -0.1 - 0.1 μA ① CE “Low” Current I CEL V BAT=VLX=VOUT=5.5V, VCE=0V -0.1 - 0.1 μA ① Inductance Value L Test Frequency=1MHz - 4.7 - μH - (Inductor) Rated Current I DC ∆T=+40℃ - 700 - mA - Ta=25 ºC

■ELECTRICAL CHARACTERISTICS (Continued) XCL101Cxx1BR-G/XCL101Cxx1ER-G Unless otherwise stated, VBAT= VCE= 1.5V (*1) VOUT(T) =Nominal Output Voltage (*2) VOUT(E) =Effective Output Voltage The actual output voltage value VOUT(E) is the PFM comparator threshold voltage in the IC. Therefore, the DC/DC circuit output voltage, including the peripheral components, is boosted by the ripple voltage average value. Please refer to the characteristic example. (*3) LX SW “Pch” ON resistance =（VLX-VOUTpin measurement voltage） / 200mA (*4) LX SW “Nch” ONresistance measurement method is shown in the measurement circuit diagram. PARAMETER SYMBOL CONDITIONS MIN. TYP . MAX. UNITS CIRCUIT Input Voltage V BAT - - - 5.5 V - Output Voltage V OUT(E)(*2) VPULL=1.5V, Voltage to strat oscillation while VOUT is decreasing <E1> V ① Operation Start Voltage V ST1 I OUT=1mA - - 0.9 V ② Operation Hold Voltage V HLD R L=1kΩ - 0.7 - V ② Supply Current Iq Oscillation stops, VOUT=VOUT(T)+0.5V (*1) <E2> μA ③ Input Pin Current I BAT V BAT=VCE=1.5V, VOUT=VOUT(E)(*2)+0.5V - 0.25 1.0 μA ③ Bypass Mode Current I BYP V BAT=VLX=5.5V, VCE=0V - 3.5 6.1 μA ⑥ PFM Switching Current I PFM I OUT=3mA 295 350 405 mA ② LX SW “Pch” ON Resistance (*3) RLXP VBAT=VLX=VCE=VOUT(E)(*2)+ 0.5V, IOUT=200mA <E3> Ω ⑦ LX SW “Nch” ON Resistance (*4) RLXN V BAT=VOUT(E)(*2)=3.3V, VOUT=1.7V - 0.6 - Ω ⑧ CE “High” Voltage V CEH VBAT=VPULL=1.5V VOUT=VOUT(T)(*1)×0.98V While VCE=0.3→0.75V, Voltage to start oscillation 0.75 - 5.5 V ① CE “Low” Voltage V CEL VBAT=VPULL=1.5V VOUT=VOUT(T) (*1)× 0.98V While VCE=0.75 → 0.3V, Voltage to stop oscillation VSS - 0.3 V ① CE “High” Current I CEH V BAT=VCE=VLX=VOUT=5.5V -0.1 - 0.1 μA ① CE “Low” Current I CEL V BAT=VLX=VOUT=5.5V, VCE=0V -0.1 - 0.1 μA ① Inductance Value L Test Frequency=1MHz - 4.7 - μH - (Inductor) Rated Current I DC ∆T=+40℃ - 700 - mA - Ta=25 ºC

■ELECTRICAL CHARACTERISTICS (Continued) SYMBOL E1 E2 E3 PARAMETER OUTPUT VOLTAGE SUPPLY CURRENT LX SW “Pch” ON RESISTANCE UNITS:V UNITS:V UNITS:μA UNITS:Ω OUTPUT VOLTAGE MIN MAX TYP MAX TYP MAX 1.8 1.764 1.836 6.1 9.4 0.84 1.08 1.9 1.862 1.938 2.0 1.960 2.040 2.1 2.058 2.142 2.2 2.156 2.244 2.3 2.254 2.346 6.2 9.7 0.75 0.97 2.4 2.352 2.448 2.5 2.450 2.550 2.6 2.548 2.652 2.7 2.646 2.754 2.8 2.744 2.856 2.9 2.842 2.958 3.0 2.940 3.060 6.3 10.0 0.65 0.85 3.1 3.038 3.162 3.2 3.136 3.264 3.3 3.234 3.366 3.4 3.332 3.468 3.5 3.430 3.570 6.4 10.2 0.61 0.78 3.6 3.528 3.672 3.7 3.626 3.774 3.8 3.724 3.876 3.9 3.822 3.978 4.0 3.920 4.080 6.5 10.4 0.57 0.74 4.1 4.018 4.182 4.2 4.116 4.284 4.3 4.214 4.386 4.4 4.312 4.488 4.5 4.410 4.590 6.7 10.7 0.53 0.72 4.6 4.508 4.692 4.7 4.606 4.794 4.8 4.704 4.896 4.9 4.802 4.998 5.0 4.900 5.100

<Test Circuit No.①> <Test Circuit No.②> <Test Circuit No.③> <Test Circuit No.④> <Test Circuit No.⑤> Lx VOUT VBATCE GND NC A Lx VOUT VBATCE GND NC AA Lx VOUT VBATCE GND NC A <Test Circuit No.⑥> <Test Circuit No.⑦> <Test Circuit No.⑧> Lx VOUT VBATCE GND NC A Lx VOUT VBATCE GND NC Vpull V A CINCL Rpull Waveform check point Lx VOUT VBATCE GND NC Waveform check point V A A CIN CL RL L V Lx VOUT VBATCE GND NC CIN V ↓ Lx VOUT VBATCE GND NC Vpull CINCLRpull Waveform check point ■TEST CIRCUITS *External conpornents CIN:4.7μF(Ceramic) CL:10μF(Ceramic) Rpull:100 ohm *External conpornents CIN:4.7μF(Ceramic) CL:10μF(Ceramic) L:4.7μH(Selected goods) *External conpornents CIN:4.7μF(Ceramic) CL:10μF(Ceramic) Rpull:4.7 ohm *External conpornents CIN:4.7μF(Ceramic) <LX SW “Nch” ON Resistance Measurement Method> Use Test Circuit No.8 to adjust Vpull so that the LX pin voltage becomes 100mV when the Nch drive Tr is ON and then the voltage at both ends of Rpull is measured to find the Lx SW "Nch" ON resistance. Note that V1 is the Rpull previous voltage when the Nch driver Tr is ON. Use an oscilloscope or other instrument to measure the LX pin voltage and V1.

■TYPICAL APPLICATION CIRCUIT (TOP VIEW) * The embedded coil is optimized for XCL101 series. Please do not use for other purposes. 【Recommended External Components】 MANUFACTURE PRODUCT NUMBER VALUE L×W (mm) CIN, CL TDK C1608JB1A106K 10μF/10V 1.60 × 0.80 C1608X5R1A106K 10μF/10V 1.60 × 0.80 C2012JB1A106K 10μF/10V 2.00 × 1.25 C2012X5R106K 10μF/10V 2.00 × 1.25 TAIYO YUDEN LMK107BBJ106MALT 10μF/10V 1.60 × 0.80 LMK212ABJ106KG 10μF/10V 2.00 × 1.25 LMK212BBJ226MG 22μF/10V 2.00 × 1.25 JMK212BBJ476MG 47μF/6.3V 2.00 × 1.25

Amp. Load Disconnection Controller CE and Bypass Controller Logic PFM Comparator Synch Buffer Drive LX VBAT VOUT Current Sense Logic VREF CFB Inductor VSS L2 L1 PFM Controller Logic VDD CE ■OPERATION EXPLANATION The XCL101 Series consists of a standard voltage source, a PFM comparator, a Nch driver Tr, a Pch synchronous rectifier switch Tr, a current sense circuit, a PFM control circuit and a CE control circuit, etc. (refer to the block diagram below.) Current limit PFM control is used for the control method to make it difficult for the output voltage ripple to increase even when the switching current is superimposed, so the product can be used within a wide voltage and current range. Further, because PFM control is used, it has excellent transient response to support low capacity ceramic capacitors to realize a compact, high-performance boost DC/DC converter. The synchronous driver and rectifier switch Tr efficiently sends the coil energy to the capacitor connected to the V OUT pin to achieve highly efficient operation from low to high loads. The electrical characteristics actual output voltage VOUT(E) is the PFM comparator threshold voltage shown in the block diagram. Therefore, the booster circuit output voltage average value, including the peripheral components, depends on the ripple voltage, so this must be carefully evaluated before being used in the actual product. < Reference Voltage Source (V REF)> The reference voltage source (VREF voltage) provides the reference voltage to ensure stable output voltage of the DC/DC converter. < PFM Control > ①The voltage from the output voltage divided by the division resistors RFB1 and RFB2 in the IC is used as feedback voltage (FB voltage), and the PFM comparator is compared with the FB voltage and VREF. If the FB voltage is lower than VREF, the signal is sent to the buffer driver via the PFM control circuit and the Nch driver Tr is turned ON. If the FB voltage is higher than VREF, the PFM comparator sends a signal that does not turn ON the Nch driver Tr. ②The current sense circuit monitors the current flowing in the Nch driver Tr connected to the Lx pin when the Nch driver Tr is ON. When the prescribed PFM switching current (IPFM) is reached, the signal is sent to the buffer driver via the PFM control circuit to turn OFF the Nch driver Tr and turn ON the Pch synchronous rectifier switch Tr. ③The Pch synchronous rectifier switch Tr ON time (off time) is dynamically optimized internally. After the off time has passed, when the PFM comparator confirms the VOUT voltage has exceeded the set voltage, a signal that does not allow the Nch driver Tr to be turned on is sent from the PFM comparator to the PFM control circuit, but if the VOUT voltage remains lower than the set voltage, then Nch driver Tr ON is started. The intervals of the above ①②③ linked operations are continuously adjusted in response to the load current to ensure the output voltage is kept stable from low to high loads and that it is done with good efficiency. VLX VOUT ILX VLX VOUT ILX VOUT(E) VOUT Voltage Average VOUT(E) IPFM VOUT:50mV/div VLX:2V/div ILX:200mA/div VOUT Voltage Average VBAT=VCE=2.0V、VOUT=3.3V、IOUT=20mA、L=4.7μH、CL=10μF、Ta=25℃ 2[μs/div ] 2[μs/div ] VBAT=VCE=2.0V、VOUT=3.3V、IOUT=70mA、L=4.7μH、CL=10μF、Ta=25℃

① ② Inrush Current Protection Characteristics CIN=4.7μF（LMK107BJ475MA） CL=10μF（LMK107BJ106MA） IOUT=1mA, Ta=25℃ CIN=4.7μF（LMK107BJ475MA） CL=10μF（LMK107BJ106MA） IOUT=1mA, Ta=25℃ ■OPERATION EXPLANATION (Continued) <PFM Switching Current> The PFM switching current unit monitors the current flowing in the Nch driver Tr and functions to limit the current flowing in the Nch driver Tr, but if the load current becomes much larger than the PFM switching energy, the VOUT voltage becomes lower and prevents the coil current in the Nch driver Tr OFF period from lowering, which affects the internal circuit delay time and results in an excessive current that is larger than the PFM switching current flowing in the Nch driver Tr and Pch synchronous rectifier switch Tr. <Load Disconnection Function, Bypass Mode> When "L" voltage is input to the CE pin, the XCL101A type enters into standby mode and the XCL101C type enters into bypass mode to stop the circuit required for the boost operation. In the standby mode the load cut-off function operates and both the Nch driver Tr and Pch synchronous rectifier switch Tr are turned OFF, which cuts off the current to the L X pin and VOUT pin and the parasitic diode control circuit connects the parasitic diode cathode of the Pch synchronous rectifier switch Tr to the L X pin ①. In the bypass mode the Nch driver Tr is OFF, the Pch synchronous rectifier switch Tr is ON when V LX > V OUT, and the parasitic diode control circuit connects the parasitic diode cathode of the Pch synchronous rectifier switch Tr to the VOUT pin ②. Also, when VLX < VOUT, the Pch synchronous rectifier switch Tr is turned OFF and the parasitic diode cathode is connected to the VOUT pin ②. Note: Except for the moment when the VBAT voltage rises up under a start-up condition. < V BAT-VOUT Voltage Detection Circuit> The VBAT-VOUT voltage detection circuit compares the VBAT pin voltage with the VOUT pin voltage, and whichever is the highest is operated to become the IC power supply (VDD). In addition, if, during normal operation, the input voltage becomes higher than the output voltage, the Nch driver Tr is turned OFF and the Pch synchronous rectifier switch Tr is kept ON so that the input voltage pass through to the output voltage (through mode). When the input voltage becomes lower than the output voltage, the circuit automatically returns to the normal boost operation. This detection circuit does not operate when in the standby mode. <Inrush Current Protection Function> When the V BAT or VCE power supply is input, CL is charged via the stable current that results from the inrush current protection function (refer to graphs below). Therefore, this function minimizes potential over current from the VBAT pin to the VOUT pin. Also, this current value depends on the VBAT voltage. After CL is charged by the aforementioned stable current and VOUT reaches around the VBAT voltage level, the inrush current protection function will be released after several hundred μs ~ several ms and the IC will then move to step-up mode, by pass mode or through mode.

■NOTE ON USE 1. Be careful not to exceed the absolute maximum ratings for externally connected components and this IC. 2. The DC/DC converter characteristics greatly depend not only on the characteristics of this IC but also on those of externally connected components, so refer to the specifications of each component and be careful when selecting the components. Be especially careful of the characteristics of the capacitor used for the load capacity CL and use a capacitor with B characteristics (JIS Standard) or an X7R/X5R (EIA Standard) ceramic capacitor. 3. Use a ground wire of sufficient strength. Ground potential fluctuation caused by the ground current during switching could cause the IC operation to become unstable, so reinforce the area around the GND pin of the IC in particular. 4. Mount the externally connected components in the vicinity of the IC. Also use short, thick wires to reduce the wire impedance. 5. An excessive current that is larger than the PFM switching current flowing in the Nch driver Tr and Pch synchronous rectifier switch Tr, which could destroy the IC. 6. When in the bypass mode, the internal Pch synchronous rectifier switch Tr turns ON to allow current to flow to the Lx pin and VOUT pin. When an excessive current comes from the VOUT pin when this bypass operates, it could destroy the Pch synchronous rectifier switch Tr. 7. The CE pin does not have an internal pull-up or pull-down, etc. Apply the prescribed voltage to the CE pin. 8. The embedded coil is optimized for XCL101 series. Please do not use for other purposes. 9. At high temperatures, the product performance could vary causing the efficiency to decline. Evaluate this carefully before use if the product will be used at high temperatures. 10. Please note that the leak current of the Pch synchronous rectifier switch Tr during high-temperature standby operation could cause the output voltage to increase. 11. When the voltage difference between VIN and VOUT is small, switching energy increases and there is a possibility that the ripple voltage will betoo large. And when the ripple voltage becomes big by influence of a load current, please add the CL capacitor. 12. When the booster circuit is activated by a low input voltage, during the time until the output voltage reaches about 1.7V, the PFM switching current function might not operate causing the coil current to be superimposed. (See the figure below.) VBAT=VCE=0→0.9V、VOUT=1.8V、IOUT=1mA、L=4.7μH、CL=10μF、Ta=25℃ 200[μs/div ] 50[μs/div ] VBAT =VCE VLX VOUT ILX VBAT =VCE VLX VOUT ILX VBAT=VCE:1.0V/div VOUT:1.0V/div VLX:2.0V/div ILX:200mA/div VBAT=VCE:1.0V/div VOUT:1.0V/div VLX:2.0V/div ILX:200mA/div Zoom 200[μs/div ] 50[μs/div ] VBAT=VCE=0→1.7V、VOUT=1.8V、IOUT=1mA、L=4.7μH、CL=10μF、Ta=25℃ VBAT =VCE VOUT VLX ILX VBAT =VCE VLX VOUT ILX VBAT=VCE:1.0V/div VOUT:1.0V/div VLX:2.0V/div ILX:200mA/div Zoom VBAT=VCE:1.0V/div VOUT:1.0V/div VLX:2.0V/div ILX:200mA/div

■NOTE ON USE (Continued) 13. If the CL capacity or load current becomes excessively large, the output voltage start-up time, when the power is turned on, will increase, so the coil current might be superimposed during the time it takes for the output voltage to become sufficiently higher than the VBAT voltage. 14. If the input voltage is higher than the output voltage, then the circuit automatically enters the through mode. When the input voltage becomes close to the output voltage, there could be repeated switching between the boost mode and through mode causing the ripple voltage to fluctuate. (Refer to the graphic below) 15. If a different power supply is connected from an external source to the XCL101A/XCL101C, the IC could be destroyed. 16. For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded. 17. Torex places an importance on improving our products and their reliability. We request that users incorporate fail-safe designs and post-aging protection treatment when using Torex products in their systems. 18. With the XCL101A, when the V BAT or VCE power supply is input, if the VOUT pin voltage does not exceed VBAT -0.35V, which can happen due to the load current being more than the inrush protection current, step-up mode or through mode operations won’t function correctly. 19. With the XCL101C, when the VBAT power supply is input, if the VOUT pin voltage does not exceed VBAT -0.35V, which can happen due to the load current being more than the inrush protection current, by pass mode operations won’t function correctly. VBAT=VCE=3.316V,VOUT=3.412V,IOUT=3mA,L=4.7μH,CL=10μF,Ta=25℃ VOUT VBAT:100mV/div VLX 200[μs/div ] VOUT:100mV/divVBAT VLX:2.0V/div

<Top view> <Bottom view> ■NOTE ON USE (Continued)

  • Instruction of pattern layouts 1. In order to stabilize VBAT voltage level, we recommend that a by-pass capacitor (CIN) be connected as close as possible to the VBAT and ground pins. 2. Please mount each external component as close to the IC as possible. 3. Wire external components as close to the IC as possible and use thick, short connecting traces to reduce the circuit impedance. 4. Make sure that the ground traces are as thick as possible, as variations in ground potential caused by high ground currents at the time of switching may result in instability of the IC. 5. Internal driver transistors bring on heat because of the transistor current and ON resistance of the driver transistors.
  • Recommended Pattern Layout

2.9 3.1 3.3 3.5 3.7 0.01 0.1 1 10 100 1000 Output Current:I OUT (m A) Output Voltage:VOUT(V) VIN=1.5V 1.8V 3.0V Ta=25℃ 4.2 4.6 5.0 5.4 5.8 0.01 0.1 1 10 100 1000 Output Current:I OUT (m A) Output Voltage:VOUT(V) VIN=3.0V 3.6V 4.2V Ta=25℃ 100 0.01 0.1 1 10 100 1000 Output Current:IOUT (m A) Efficiency:EFFI(%) 3.0V 1.8V VIN= 1.5V Ta=25℃ 100 0.01 0.1 1 10 100 1000 Output Current:IOUT (m A) Efficiency:EFFI(%) 4.2V 3.6V VIN= 3.0V Ta=25℃ 120 160 200 0.01 0.1 1 10 100 1000 Output Current:IOUT (m A) Ripple Voltage:Vr(mV) VIN=1.5V 3.0V 1.8V Ta=25℃ 120 160 200 0.01 0.1 1 10 100 1000 Output Current:IOUT (m A) Ripple Voltage:Vr(mV) VIN=3.0V 4.2V 3.6V Ta=25℃ ■TYPICAL PERFORMANCE CHARACTERISTICS 1) Output Voltage vs. Output Current 2) Efficiency vs. Output Current 3) Ripple Voltage vs. Output Current XCL101C331BR-G XCL101C331BR-G XCL101C331BR-G XCL101C501BR-G XCL101C501BR-G XCL101C501BR-G

3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 0 50 100 150 200 250 300 Output Current: IOUT (m A) VIN=3.6V CE=0V Output Voltage : VOUT (V) Ta=25℃ -40℃ 85℃ 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 0 50 100 150 200 250 300 Output Current: I OUT (mA) VIN=5.0V CE=0V Output Voltage : VOUT (V) 85℃ Ta=25℃ -40℃ ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 4) Bypass Voltage vs. Output Current 5) Load Transient Response XCL101C331BR-G XCL101C501BR-G XCL101C331BR-G VBAT=VCE=1.8V, VOUT=3.3V, Ta=25℃, CIN=4.7μF, CL=10μF VOUT:50mV/Div, IOUT SW:1.0V/Div, Time:20μs IOUT= 1.0mA→50mA XCL101C331BR-G IOUT= 50mA→1.0mA VOUT IOUT SW IOUT =1.0mA IOUT =50mA VOUT IOUT SW IOUT =1.0mA IOUT =50mA VBAT=VCE=1.8V, VOUT=3.3V, Ta=25℃, CIN=4.7μF, CL=10μF VOUT:50mV/Div, IOUT SW:1.0V/Div, Time:20μs XCL101C501BR-G IOUT= 1.0mA→50mA XCL101C501BR-G IOUT= 1.0mA→50mA VBAT=VCE=3.0V, VOUT=5.0V, Ta=25℃, CIN=4.7μF, CL=10μF VOUT:50mV/Div, IOUT SW:1.0V/Div, Time:20μs VBAT=VCE=3.0V, VOUT=5.0V, Ta=25℃, CIN=4.7μF, CL=10μF VOUT:50mV/Div, IOUT SW:1.0V/Div, Time:20μs VOUT IOUT SW IOUT =1.0mA IOUT =50mA VOUT IOUT SW IOUT =1.0mA IOUT =50mA

■PACKAGING INFORMATION

  • Reference Pattern Layout (unit:mm) ● Reference Metal Mask Design (unit:mm)
  • CL-2025 (unit: mm) External Lead External Lead

■PACKAGING INFORMATION

  • CL-2025-02 (unit: mm) External Lead
  • Reference Pattern Layout (unit:mm) ●Reference Metal Mask Design (unit:mm) *Implementation of CL-2025-02 is recommended within accuracy 0.05mm.

■MARKING RULE ① represents products series ② represents integer portion of the output voltage ③ represents the decimal part of output voltage Example (mark②, ③) ④, ⑤ represents production lot number 01～09, 0A～0Z, 11～9Z, A1～A9, AA～AZ, B1～ZZ in order. (G, I, J, O, Q, W excluded) * No character inversion used. MARK PRODUCT SERIES VOUT (V) MARK VOUT (V) MARK 1.x 1 1.x B 2.x 2 2.x C 3.x 3 3.x D 4.x 4 4.x E 5.x 5 5.x F VOUT(V) MARK PRODUCT SERIES MARK ② ③ ② ③ ② ③ 3 3 C 8 5 0 ⑤ ④ CL-2025/CL-2025-02

  1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD. TOREX SEMICONDUCTOR LTD.