Power Management

XC6405DE84MR

Torex Semiconductor

High Current, High Speed LDO Regulators, Voltage Detector Function

Manufacturer: Torex Semiconductor

Document: 54 Pages / 558Kb

Request Quote Download Datasheet Read online HTML view

More from Torex Semiconductor Browse X parts

Online Datasheet

Read XC6405DE84MR online.

XC6405 TOREX | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 54

Technical content

High Current, High Speed LDO Regulators, Voltage Detector Function October 2, 2003 V6 !Low Power Consumption : 90 µA (TYP.) !APPLICATIONS !Dropout Voltage : 200mV @ 100mA " CD-ROM, CD-R/RW drive : 400mV @ 200mA " DVD drive !Maximum Output Current : more than 500mA (600mA limit) " HDD drive (2.5V<VROUT<4.9V) " Cameras, Video recorders !Highly Accurate : ± 2% " Portable AV equipment !VR Setting Output Voltage Range : 0.9V ~ 5.1V " Battery powered equipment !Detect Voltage Setting Range : 0.9V ~ 5.5V (V IN : >2.0V) !Low ESR capacitor compatible !GENERAL DESCRIPTION !FEATURES Maximum Output Current more than 500mA (600mA limit) (2.5V< VROUT<4.9V) Dropout Voltage 200mV (IROUT=100mA) Operating Voltage Range 2.0V ~ 6.0V VR Setting Output Voltage Range 0.9V ~ 5.1V (100mV step, ± 2%) Detect Voltage Setting Range 0.9V ~ 5.5V (100mV step, ± 2%) When monitoring VIN more than 2.0V VR.VD Temperature Coefficient ±100ppm/ OC (TYP.) Low Power Consumption 90 µA (TYP.) High Ripple Rejection 65dB (@10kHz) Ultra Small Packages SOT-25 (SOT-23-5) SOT-89-5 Operating Temperature Range - 40 ~ 85 OC Low ESR Capacitor Compatible !TYPICAL APPLICATION CIRCUITS XC6405A ~ D Series XC6405E Series XC6405F Series Semiconductor Ltd. The XC6405 series are precise, low noise, high speed, high current, positive voltage low dropout regulators with built-in voltage detector. They are fabricated using Torex’s CMOS process. Performance features of the series includes high ripple rejection and low dropout voltage, and the series features a voltage reference, an error amplifier, a current limiter and a phase compensation circuit plus a driver transistor. Detect voltage is selectable in 100mV increments within the range of 0.9V to 5.5V and the LDO output voltage is selectable within a range of 0.9V to 5.1V, also in 100mV increments. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series. The current limiter's foldback circuit also operates as a short circuit protection for the output current limiter and the output pin. The series provides options to the user to select from a variety of circuit features, such as detector monitoring, detector output logic, CE and EN pin input logic, internal pull-up / down resistance, and power ready. The IC's internal regulator circuit can be placed in stand-by mode via the EN function (XC6405 A to C series). The whole IC can be put in to stand-by mode via the CE function with the XC6405D series (semi- custom). In the stand-by mode, power consumption is greatly reduced. The XC6405 A and B series features the toggle operation function. The regulator output can be OFF when the XC6405B series detects voltage (semi-custom). The XC6405E series can monitor another power source by using the VSEN pin (semi-custom). The XC6405F series can delay the detector output: the delay time can be controlled by the use of an external capacitor (semi-custom). VIN VSS VROUT VDOUT EN/CE Rpull-up 200K CIN 1uF VROUT CL

5 VIN

High Current, High Speed LDO Regulators, Voltage Detector Function !PIN CONFIGURATION !PIN ASSIGNMENT !SELECTION GUIDE 1. TOGGLE FUNCTION, VD SELF-SATURATION AS OPTION 2. STAND-BY MODE FUNCTION AS OPTION 3. CE / EN INPUT LOGIC, INTERNAL PULL-UP/DOWN AS OPTION (* : A ~ D Series) 4. VD SENSE AS OPTION (* : A ~ D and F Series) 5. VD OUTPUT LOGIC AS OPTION 6. VD DELAY FUNCTION AS OPTION SOT-25 XC6405F Delay time adjustable by connecting Cd XC6405A ~ E No Delay XC6405A ~ F Detect L or Detect H SERIES DELAY FUNCTION XC6405 E V ~ Z VSEN VOUT SERIES VD OUTPUT LOGIC FUNCTION XC6405 * C, D, H, K, N, P, T, U, Y, Z VD SENSE PIN VIN SERIES XC6405 * A, B, E, F, L, M, R, S, V, X SERIES XC6405 * A ~ D Active HIGH with pull down XC6405 * R ~ U Active LOW with no pull up XC6405 * E ~ K Active LOW with pull up Active HIGH with no pull down XC6405 * L ~ P XC6405E, F Chip Stand-by mode functionXC6405D No Stand-by mode function VD Output VR Output CE INPUT LOGIC XC6405A XC6405B XC6405C ~ F VD with Toggle Function and Self-Saturation VD with no Toggle Function SERIES VD with Toggle Function SERIES VR with Stand-by mode function STAND-BY MODE FUNCTION TOGGLE FUNCTION (BUILT-IN) XC6405A ~ C SOT-89-5 VDOUT VROUT EN CE VSEN Cd ON / OFF Control VD Monitoring Delay Capacitor Connection PIN NAME FUNCTION Power Input Ground VR ON / OFF Control VIN VSS PIN NUMBER SOT-25 (TOP VIEW) Semiconductor Ltd. SOT-89-5 (TOP VIEW) 321 VROUTVSSVIN EN/CE VSEN/Cd VDOUT 12 3 EN/CE VSEN/Cd VIN VSS VDOUTVROUT Data Sheet 2

High Current, High Speed LDO Regulators, Voltage Detector Function !ORDERING INFORMATION XC6405 123456 Optional Functions : A : Toggle and EN Function (Preliminary *) M : SOT-25 VD signal/VR OFF function (Preliminary *) C : EN Function (Preliminary *) P : SOT-89-5 D : CE Function (Preliminary *) E : VSEN Pin (Preliminary *) F : Cd Pin Types : As in the chart below. Taping Direction: R: Embossed Tape, Standard feed L : Embossed Tape, Reverse feed Detect Voltage Setting Range : 0.9V ~ 5.5V 100mV step increments are available PIN NUMBER : 2 Types * The XC6405A, XC6405B, XC6405C, XC6405D, XC6405E series are under development. For further detail, please ask your sales contacts. VROUT Detect L - - VIN / VSEN Detect H - - VROUT Detect H VIN / VSEN Detect L Active LOW Nonfunctional VROUT Detect H A ~ D Series Active LOW Nonfunctional VROUT Detect L Active LOW Nonfunctional VIN Detect H Active LOW Nonfunctional VIN Detect L Active LOW Pull-up Function VROUT Detect H Active LOW Pull-up Function VROUT Detect L Active LOW Pull-up Function VIN Detect H Active LOW Pull-up Function VIN Detect L VROUT Detect L Active HIGH Nonfunctional VROUT Detect H VIN Detect L Active HIGH Nonfunctional VIN Detect H VROUT Detect L Active HIGH Pull-down Function VROUT Detect H VIN Detect L Active HIGH Pull-down Function VIN Detect H Nonfunctional Nonfunctional Active HIGH Pull-down Function Active HIGH Pull-down Function Active HIGH Nonfunctional Active HIGH Nonfunctional Function Function Nonfunctional Nonfunctional Function Function Function Function Function Function Function Function VD SENSE PIN VD OUTPUT LOGICPULL UP/DOWN RESISTANCE PIN NUMBER Y Z EN / CE FUNCTION EN / CE LOGIC Function Function Function Function Function Function U V X R S T M N P K L E F H A B C D VR Setting Output Voltage Range : 0.9V ~ 5.1V B : Toggle, EN Function, Internally set sequential number relating to output voltage and detect voltage (refer to the chart on page 4.) Packaging Types: FUNCTION PIN NUMBER FUNCTIONPIN NUMBER E & F Series F Series Semiconductor Ltd. Data Sheet 3

High Current, High Speed LDO Regulators, Voltage Detector Function !ORDERING INFORMATION # Pin Number 3, 4 Type (80 ~ 99 : Standard voltage products) For the other voltages, please ask your sales contacts. # Ordering Example (Standard Products) Except for the standard products, minimum ordering quantity is 15K. 1.80 XC6405FV88MR Cd function, VIN Sense, Detect L 3.30 4.00 XC6405FV87MR Cd function, VIN Sense, Detect L 3.00 4.20 XC6405DE86MR CE function, Active HIGH, VIN Sense, Detect L 3.50 3.80 XC6405DE85MR CE function, Active HIGH, VIN Sense, Detect L 3.00 3.30 XC6405DE84MR CE function, Active HIGH, VIN Sense, Detect L 2.85 3.20 XC6405DE83MR CE function, Active HIGH, VIN Sense, Detect L 2.50 2.80 XC6405DE82MR CE function, Active HIGH, VIN Sense, Detect L 1.80 2.00 1.60 XC6405CE81MR EN function, Active HIGH, VIN Sense, Detect L 2.80 3.10 XC6405CH80MR EN function, Active HIGH, VROUT Sense, Detect L PRODUCT NAME PRODUCT DESCRIPTION 20 40 VROUT VDOUT VOLTAGE 83 2.50 2.80 84 2.85 3.20 3.10 82 1.80 2.00

34 VROUT VDOUT

80 1.80 1.60 VDOUT34 VROUT VROUT VDOUT 3.30 3.10 3.30 3.00 3.30 2.80 3.30 3.70 1.80 3.30 3.80 3.30 4.20 2.60 3.30 4.00

34 VROUT

2.20 3.00 VDOUT 81 2.80 06 3.30 3.60 26 85 3.00 3.30 07 1.80 2.30 27 86 3.50 3.80 87 3.00 4.20 88 3.30 4.00 11 2.60 3.90 31 90 32 91 1.80 3.60 33 92 14 34 93 XC6405DE89MR CE function, Active HIGH, VIN Sense, Detect L 1.20 2.00 XC6405DE90MR CE function, Active HIGH, VIN Sense, Detect L 1.30 2.00 XC6405DE91MR CE function, Active HIGH, VIN Sense, Detect L 1.50 2.00 Semiconductor Ltd. Data Sheet 4

High Current, High Speed LDO Regulators, Voltage Detector Function !PACKAGING INFORMATION #SOT-25 #SOT-89-5 Semiconductor Ltd. Data Sheet 5

High Current, High Speed LDO Regulators, Voltage Detector Function !ABSOLUTE MAXIMUM RATINGS ! ELECTRICAL CHARACTERISTICS XC6405 Series Ta=25OC mA 1Short-Circuit Current IRshort VOLTAGE REGULATOR Vdif1 Vdif2 Pd SYMBOL VIN=VEN=VROUT(T)+1.0V, VROUT<0.9V VIN=2.0V VIN Topr RATINGS 7.0 700 VSS -0.3 ~ VIN +0.3 VRIOUT VROUT VSEN / Cd Operating Temperature Range Storage Temperature Range SOT-25 SOT-89-5 Continuous Power Dissipation IRlim Input Voltage VR Output Current VD Output Current VCE / VSEN / Cd Pin Voltage VD Output Voltage VR Output Voltage VDOUT VSS -0.3 ~ 7.0 UNITSTYP MAX VCE / Tstg V 250 mV 15 50 mV E-1 (page 15) E-2 (page 15) 6.0 0.20 600 µA145 165 µA 600 VIN=VROUT(T)+2.0V When VROUT(T)>4.0V, VIN=6.0V ±100 VDIOUT 0.01 x 0.98 x 1.02IROUT=30mA 500 2.0 IROUT=30mA IROUT=100mA 400 VIN=VROUT(T)+2.0V When VROUT(T)>4.0V, VIN=6.0V 1mA<IROUT<100mA PARAMETER 500 - 40 ~ + 85 OC - 55 ~ + 125 MINCONDITIONS CIRCUIT V UNITS VSS -0.3 ~ VIN + 0.3 mW VROUT(T) V V mA VR Maximum Output Current (0.9 ~ 2.4V product) PARAMETER VR Output Voltage (note 2, 3) VROUT(E) SYMBOL OC mA V 1∆VROUT 500 mA mAVIN=VROUT(T)+2.0V VR Maximum Output Current (2.5 ~ 4.9V product) VR Load Regulation VR Dropout Voltage (note 4) Supply Current (No Pull-up Resistor) VR Current Limiter (2.5V or more) VR Line Regulation Input Voltage VR Output Voltage Temperature Characteristics VR Current Limiter (2.4V or less) VR Ripple Rejection Rate 65 ∆Topr ⋅ VROUT IROUTMAX IROUTMAX IDD ∆VROUT When VROUT(T) < 1.25V ! VIN=2.25V+0.5Vp-pAC VIN -40OC<Topr<85OC VIN=[VROUT(T)+1.0]V+0.5Vp-pAC PSRR When VROUT(T) > 4.75V ! VIN=5.75V+0.5Vp-pAC IROUT=50mA, f=10kHz mA 1 mA 1 dB V ppm / OC mV % / V Supply Current (With Pull-up Resistor) IDD 100 VIN=VEN=VROUT(T)+1.0V, VROUT<0.9V VIN=2.0V VROUT(T)+1.0V<VIN<6.0V When VROUT<1.75V, IROUT=10mA ∆VROUT ∆VIN ⋅ VROUT VIN=VROUT(T)+2.0V When VROUT(T)>4.0V, VIN=6.0V When VROUT<0.9V, 2.0V<VIN<6.0V IROUT=30mA IRlim VIN=VROUT(T)+2.0V IROUT=30mA Semiconductor Ltd. Data Sheet 6

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 Series Ta=25OC SWITCH (NO PULL-UP RESISTOR) OPTION (NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V (NOTE 2) VROUT(T)=Specified VR Output Voltage (NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)} (NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input. (NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased. (NOTE 7) VDF (T) : Specified Detect Voltage value (NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (NOTE 9) VD Output Current value of Detect 'L' type equal to current value during detection and that of Detect 'H' type equal to current value before detection. Delay Resistance=6.0V/Delay Current 300 500 700 kΩDelay Resistance Rdelay VIN=6.0V CE/EN "Low" Level Current ICE/EN L VIN=VROUT(T)+1.0V, VCE/EN=VSS -0.10 0.10 µA 2 -0.10

0.25 V 1

V 20 µA CE/EN "High" Level Voltage VCE/EN H CE/EN "High" Level Current ICE/EN H VCE/EN=VIN=VROUT(T)+1.0V CE/EN "Low" Level Voltage VCE/EN L PARAMETER SYMBOL VD Output Current (note 9) IDOUT mA VIN = 6.0V 5.0 VIN = 3.0V 10.0 15.0 VD Supply Current IDDVD µA VIN = 6.0V 14.5 20.0 3.0 10.0 4.0 8.0 6.0

1.60 VIN

(NOTE 3) VOUT(E)=Actual VR Output Voltage. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. VOLTAGE DETECTOR VIN = 3.0V 24.0 7.0 12.0 V 12.0 17.5 29.019.0 4VVDF (T) x 0.08 VDF (T) TYP 4VDF (E) x 0.98 VDF (T) x 1.02 26.0 19.0 ∆Topr ⋅ VDF ∆VDF / -40OC<Topr<85OC VIN = 2.0V VIN = 5.0V VIN = 4.0V VIN = 4.0V VIN = 5.0V VHYS x 0.05 VDF (T) x 0.02 ±100 10.0 VD Detect Voltage Temperature Characteristics CONDITIONS MIN (i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value). VD Hysteresis Range (note 7) VD Detect Voltage (note 7, 8) ppm / OC MAX UNITS CIRCUIT VIN = 2.0V VDOUT = 0.5V Semiconductor Ltd. Data Sheet 7

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 AA / AD / AE / AH Series Ta=25OC VIN=VEN=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.0V VIN=VEN=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.1V 100 165 1Short-circuit Current IRshort VIN=VROUT(T)+2.0V When VROUT(T)>4.0V, VIN=6.0V 50 mA ±100 ppm / OC 4VD Detect Voltage Temperature Characteristics ∆VDF / -40OC<Topr<85OC∆Topr ⋅ VDF VIN = 6.0V 10.0 15.0 VIN = 5.0V 7.0 12.0 VIN = 4.0V 5.0 10.0 mA VIN = 2.0V 3.0 6.0 VIN = 3.0V 4.0 8.0 VDOUT = 0.5V VIN = 3.0V 7.0 20.0 VIN = 4.0V 7.5 24.0 VIN = 5.0V 6.5 19.0 µA 8.0 26.0 9.0 29.0 4 x 0.02 x 0.05 x 0.08 VDF (T) VDF (T) VDF (T) V VOLTAGE DETECTOR VD Hysteresis Range (note 8) VHYS VD Supply Current (note 9) IDDVD VIN = 2.0V VIN = 6.0V VD Output Current (note 10) IDOUT VDF (T) x 1.02 V 4VD Detect Voltage (note 7, 8) VDF (E) x 0.98 600 mA 1VR Current Limiter (2.5V or more) IRlim VIN=VROUT(T)+2.0V When VROUT(T)>4.0V, VIN=6.0V 500 dB 3 VR Current Limiter (2.4V or less) IRlim VIN=VROUT(T)+2.0V 600 mA 1 ! VIN=5.75V+0.5Vp-pAC IROUT=50mA, f=10kHz ppm / OC 1 VR Ripple Rejection Rate PSRR VIN=[VROUT(T)+1.0]V+0.5Vp-pAC When VROUT(T) < 1.25V ! VIN=2.25V+0.5Vp-pAC When VROUT(T) > 4.75V VR Output Voltage Temperature Characteristics ∆VROUT IROUT=30mA ∆Topr ⋅ VROUT -40OC<Topr<85OC % / V 1 Input Voltage VIN 2.0 6.0 V VR Line Regulation VROUT(T)+1.0V<VIN<6.0V When VROUT<1.75V, IROUT=10mA µA 2Supply Current (AE / AH Series) IDD Supply Current (AA / AD Series) IDD VR Dropout Voltage (note 4) 90 145 µA Vdif2 IROUT=100mA E-2 (page 15) mV 1 Vdif1 IROUT=30mA E-1 (page 15) mV mA 1 VR Load Regulation ∆VROUT 1mA<IROUT<100mA 15 50 mV 1 x 1.02 V 1 mA 1 VOLTAGE REGULATOR VR Output Voltage (note 2, 3) VROUT(E) IROUT=30mA VR Maximum Output Current (0.9 ~ 2.4V product) IROUTMAX VIN=VROUT(T)+2.0V VR Maximum Output Current (2.5 ~ 4.9V product) IROUTMAX VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V ±100 VROUT(T) 0.01 0.20 TYPPARAMETER SYMBOL CONDITIONS MIN x 0.98 400 MAX UNITS CIRCUIT 500 ∆VROUT ∆VIN ⋅ VROUT When VROUT<0.9V, 2.0V<VIN<6.0V IROUT=30mA Semiconductor Ltd. Data Sheet 8

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 AA / AD / AE / AH Series Ta=25OC SWITCH (NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V (NOTE 2) VROUT(T)=Specified VR Output Voltage (NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)} (NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input. (NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased. (NOTE 7) VDF (T) : Specified Detect Voltage value (NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (NOTE 9) VD Supply Current = Supply Current when VEN=VSS (NOTE 10) VD Output Current = Sink Current during detection. EN "Low" Level Voltage VEN L 0.25 V VIN=VROUT(T)+1.0V, VEN=VSS (NOTE 3) VOUT(E)=Actual VR Output Voltage. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value). EN "Low" Level Current IEN L -0.10 0.10 µA 2 EN "High" Level Current (AE /AH Series) IEN H VEN=VIN=VROUT(T)+1.0V 2-0.10 0.10 µA 20 µA 2EN "High" Level Current (AA / AD Series) IEN H VEN=VIN=VROUT(T)+1.0V -0.10 UNITS CIRCUIT EN "High" Level Voltage VEN H 1.60 VIN V PARAMETER SYMBOL CONDITIONS MIN TYP MAX Semiconductor Ltd. Data Sheet 9

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 CA / CD / CE / CH Series Ta=25OC ±100 ppm / OC 4VD Detect Voltage Temperature Characteristics ∆VDF / -40OC<Topr<85OC∆Topr ⋅ VDF VIN = 6.0V 10.0 15.0 VIN = 5.0V 7.0 12.0 VIN = 4.0V 5.0 10.0 mA VIN = 2.0V 3.0 6.0 VIN = 3.0V 4.0 8.0 VDOUT = 0.5V VIN = 3.0V 7.0 20.0 VIN = 4.0V 7.5 24.0 VIN = 5.0V 6.5 19.0 µA 8.0 26.0 9.0 29.0 4 x 0.02 x 0.05 x 0.08 VDF (T) VDF (T) VDF (T) V VOLTAGE DETECTOR VD Hysteresis Range (note 8) VHYS VD Supply Current (note 9) IDDVD VIN = 2.0V VIN = 6.0V VD Output Current (note 10) IDOUT VDF (T) x 1.02 V 4VD Detect Voltage (note 7, 8) VDF (E) x 0.98 50 mA 1Short-Circuit Current IRshort VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V VR Current Limiter (2.5V or more) IRlim VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V 500 600 mA 1 600 mA ! VIN=5.75V+0.5Vp-pAC VR Current Limiter (2.4V or less) IRlim VIN=VROUT(T)+2.0V 65VR Ripple Rejection Rate 3dBPSRR VIN=[VROUT(T)+1.0]V+0.5Vp-pAC When VROUT(T) < 1.25V ! VIN=2.25V+0.5Vp-pAC When VROUT(T) > 4.75V IROUT=50mA, f=10kHz ±100 ppm / OC∆Topr ⋅ VROUT -40OC<Topr<85OC VR Output Voltage Temperature Characteristics ∆VROUT IROUT=30mA VR Line Regulation Input Voltage VIN 2.0 VROUT(T)+1.0V<VIN<6.0V ∆VROUT When VROUT<0.9V, 2.0V<VIN<6.0V PARAMETER SYMBOL CONDITIONS TYP VR Maximum Output Current (2.5 ~ 4.9V product) VR Maximum Output Current (0.9 ~ 2.4V product) IROUTMAX VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V VR Load Regulation ∆VROUT 1mA<IROUT<100mA MIN 500 Vdif1VR Dropout Voltage (note 4) CIRCUIT VROUT(E) IROUT=30mA UNITS x 0.98 VROUT(T) MAX mV 1 IROUT=30mA E-1 (page 15) Supply Current (CA / CD Series) µA mV 1Vdif2 IROUT=100mA VOLTAGE REGULATOR VR Output Voltage (note 2, 3) V 1 145 E-2 (page 15) 0.01 0.20 % / V 1 IDD VIN=VEN=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.0V 90 6.0 V IROUTMAX VIN=VROUT(T)+2.0V 400 50 mV mA mA x 1.02 Supply Current (CE / CH Series) IDD VIN=VEN=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.0V 100 165 µA ∆VIN ⋅ VROUT IROUT=30mA When VROUT<1.75V, IROUT=10mA Semiconductor Ltd. Data Sheet 10

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 CA / CD / CE / CH Series Ta=25OC SWITCH (NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V (NOTE 2) VROUT(T)=Specified VR Output Voltage (NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)} (NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input. (NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased. (NOTE 7) VDF (T) : Specified Detect Voltage value (NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (NOTE 9) VD Supply Current = Supply Current when VEN=VSS (NOTE 10) VD Output Current = Sink Current during detection. (NOTE 3) V OUT(E)=Actual VR Output Voltage. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value). 0.10 µA 2EN "Low" Level Current IEN L VIN=VROUT(T)+1.0V, VEN=VSS -0.10 0.10 µA 2EN "High" Level Current (CE /CH Series) IEN H VEN=VIN=VROUT(T)+1.0V -0.10 20 µA 2EN "High" Level Current (CA / CD Series) IEN H VEN=VIN=VROUT(T)+1.0V -0.10 EN "Low" Level Voltage VEN L 0.25 V 1 UNITS CIRCUIT EN "High" Level Voltage VEN H 1.6 VIN V PARAMETER SYMBOL CONDITIONS MIN TYP MAX Semiconductor Ltd. Data Sheet 11

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 DA / DD / DE / DH Series Ta=25OC (NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V (NOTE 2) VROUT(T)=Specified VR Output Voltage (NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)} (NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input. (NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased. (NOTE 7) VDF (T) : Specified Detect Voltage value (NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (NOTE 9) VD Output Current = Sink Current during detection. IDD VIN=VROUT(T)+1.0V, VCE=0V, When VROUT< 0.9V, VIN=2.0V (NOTE 3) VOUT(E)=Actual VR Output Voltage. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value). Stand-by Current (DA / DD / DE / DH Series) 0.01 2 0.10 µA 2 0.10 µA 2 CE "Low" Level Current ICE L VIN=VROUT(T)+1.0V, VCE=VSS -0.10 CE "High" Level Current (DE /DH Series) ICE H VCE=VIN=VROUT(T)+1.0V -0.10 20 µA 2CE "High" Level Current (DA / DD Series) ICE H VCE=VIN=VROUT(T)+1.0V -0.10

0.25 V 1CE "Low" Level Voltage VCE L

CE "High" Level Voltage VCE H 11.6 VIN V ppm / OC∆VDF / -40OC<Topr<85OC∆Topr ⋅ VDF 10.0 15.0 5mA 7.0 12.0 ±100 VIN = 2.0V 3.0 6.0 VIN = 4.0V 5.0 10.0 VIN = 3.0V 4.0 8.0 4 x 0.02 x 0.05 x 0.08 VDF (T) VDF (T) VDF (T) V VOLTAGE DETECTOR VD Hysteresis Range (note 8) VHYS VD Output Current (note 9) IDOUT VDOUT = 0.5V VIN = 5.0V VIN = 6.0V VD Detect Voltage Temperature Characteristics VDF (T) x 1.02 V 4VD Detect Voltage (note 7, 8) VDF (E) x 0.98 50 mA 1Short-Circuit Current IRshort VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V 600 mA 1VR Current Limiter (2.5V or more) IRlim VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V 500 600 mA 1VR Current Limiter (2.4V or less) IRlim VIN=VROUT(T)+2.0V 65 dB 3VR Ripple Rejection Rate PSRR VIN=[VROUT(T)+1.0]V+0.5Vp-pAC When VROUT(T) < 1.25V ! VIN=2.25V+0.5Vp-pAC When VROUT(T) > 4.75V ! VIN=5.75V+0.5Vp-pAC IROUT=50mA, f=10kHz ±100 ppm / OC 1VR Output Voltage Temperature Characteristics ∆VROUT IROUT=30mA ∆Topr ⋅ VROUT -40OC<Topr<85OC Input Voltage VIN 2.0 6.0 V IROUT=30mA 0.01 0.20 % / V 165 µA 0.10 % / V VR Line Regulation VROUT(T)+1.0V<VIN<6.0V When VROUT<1.75V, IROUT=10mA ∆VIN ⋅ VROUT Supply Current (DE / DH Series) IDD 100 Supply Current (DA / DD Series) IDD 90 145 µA 2 Vdif2 IROUT=100mA E-2 (page 15) mV 15 50 mV 1 E-1 (page 15) mV VR Load Regulation ∆VROUT 1mA<IROUT<100mA mA 1 VR Maximum Output Current (0.9 ~ 2.4V product) IROUTMAX VIN=VROUT(T)+2.0V 400 500 mA x 0.98 VROUT(T) x 1.02 V VOLTAGE REGULATOR VR Output Voltage (note 2, 3) VROUT(E) IROUT=30m A VR Maximum Output Current (2.5 ~ 4.9V product) IROUTMAX VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V VR Dropout Voltage (note 4) Vdif1 IROUT=30mA PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS CIRCUIT SWITCH VIN=VCE=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.0V VIN=VCE=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.0V ∆VROUT When VROUT<0.9V, 2.0V<VIN<6.0V Semiconductor Ltd. Data Sheet 12

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 EV / EX Series Ta=25OC (NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V (NOTE 2) VROUT(T)=Specified VR Output Voltage (NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)} (NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input. (NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased. (NOTE 7) VDF (T) : Specified Detect Voltage value (NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) less than 1.5V. (NOTE 9) VD Output Current = Sink Current during detection. ppm / OC 4∆Topr ⋅ VDF 10.0 15.0 ±100 VIN = 2.0V VD Detect Voltage Temperature Characteristics ∆VDF / -40OC<Topr<85OC 3.0 6.0 7.0 12.0 4 x 0.02 x 0.05 x 0.08 VDF (T) VDF (T) VDF (T) V VOLTAGE DETECTOR VD Hysteresis Range VHYS VD Output Current (note 9) IDOUT VDOUT = 0.5V VIN = 5.0V VIN = 6.0V VIN = 4.0V VDF (T) x 1.02 V 4VD Detect Voltage VDF (E) x 0.98 50 mA 1Short-Circuit Current IRshort VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V 600 mA 1VR Current Limiter (2.5V or more) IRlim VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V 500 600 mA 1VR Current Limiter (2.4V or less) IRlim VIN=VROUT(T)+2.0V 65 dB 3Ripple Rejection Rate PSRR VIN=[VROUT(T)+1.0]V+0.5Vp-pAC When VROUT(T) < 1.25V ! VIN=2.25V+0.5Vp-pAC When VROUT(T) > 4.75V ! VIN=5.75V+0.5Vp-pAC IROUT=50mA, f=10kHz ±100 ppm / OC 1VR Output Voltage Temperature Characteristics ∆VROUT IROUT=30mA ∆Topr ⋅ VROUT -40OC<Topr<85OC % / V 1 Input Voltage VIN 2.0 6.0 V VR Line Regulation 0.01 0.20 VROUT(T)+1.0V<VIN<6.0V ∆VROUT When VROUT<0.9V, 2.0V<VIN<6.0V ∆VIN ⋅ VROUT IROUT=30mA 90 145 µA 2Supply Current (EV / EX Series) IDD VIN=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.0V mV 1 Vdif2 IROUT=100mA E-2 (page 15) mV 1VR Dropout Voltage Vdif1 IROUT=30mA E-1 (page 15) 15 50 mV 1VR Load Regulation ∆VROUT 1mA<IROUT<100mA mA 1VR Maximum Output Current (2.5 ~ 4.9V product) IROUTMAX VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V 500 VR Maximum Output Current (0.9 ~ 2.4V product) IROUTMAX VIN=VROUT(T)+2.0V 400 mA 1 UNITS CIRCUIT VOLTAGE REGULATOR VR Output Voltage VROUT(E) IROUT=30mA x 0.98 VROUT(T) x 1.02 V PARAMETER SYMBOL CONDITIONS MIN TYP MAX When VROUT<1.75V, IROUT=10mA (NOTE 3) VOUT(E)=Actual VR Output Voltage. Refer to the E-0 chart on page 15 for VDF(T) less than 1.5V. (i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value). Semiconductor Ltd. Data Sheet 13

High Current, High Speed LDO Regulators, Voltage Detector Function ! ELECTRICAL CHARACTERISTICS (Continued) XC6405 FV / FX / FY / FZ Series Ta=25OC (NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V (NOTE 2) VROUT(T)=Specified VR Output Voltage (NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)} (NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input. (NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased. (NOTE 7) VDF (T) : Specified Detect Voltage value (NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. (NOTE 9) VD Supply Current = Sink Current during detection. 300 500 700 Delay Resistance=6.0V/Delay CurrentDelay Resistance Rdelay VIN=6.0V, Cd=0V VOLTAGE REGULATOR CIRCUITUNITSMAXTYPMINCONDITIONSSYMBOLPARAMETER x 0.98IROUT=30mAVROUT(E)VR Output Voltage (note 2, 3) 1Vx 1.02VROUT(T) 500IROUTMAXVR Maximum Output Current (2.5 ~ 4.9V product) 1mA400IROUTMAXVR Maximum Output Current (0.9 ~ 2.4V product) VR Dropout Voltage (note 4) 1mV50151mA<IROUT<100mA∆VROUTVR Load Regulation Vdif2 1mVE-1 (page 15)IROUT=30mA 1mVE-2 (page 15)IROUT=100mA VR Line Regulation 2µA14590VIN=VROUT(T)+1.0V, When VROUT<0.9V, VIN=2.0VIDDSupply Current (FV / FX / FY / FZ Series) 1% / V0.200.01 2.0VINInput Voltage V6.0 IROUT=30mA∆VROUTVR Output Voltage Temperature Characteristics 1ppm / OC±100 PSRRRipple Rejection Rate -40OC<Topr<85OC∆Topr ⋅ VROUT When VROUT(T) < 1.25V 3dB65 VIN=[VROUT(T)+1.0]V+0.5Vp-pAC IROUT=50mA, f=10kHz ! VIN=5.75V+0.5Vp-pAC When VROUT(T) > 4.75V ! VIN=2.25V+0.5Vp-pAC VIN=VROUT(T)+2.0VIRlimVR Current Limiter (2.4V or less) 1mA600 500VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0VIRlimVR Current Limiter (2.5V or more) 1mA600 VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0VIRshortShort-Circuit Current 1mA50 x 0.98VDF (E)VD Detect Voltage (note 7, 8) 4Vx 1.02VDF (T) VHYSVD Hysteresis Range (note 8) VOLTAGE DETECTOR -40OC<Topr<85OC∆VDF /VD Detect Voltage Temperature Characteristics x 0.08x 0.05 x 0.02 4VVDF (T)VDF (T)VDF (T) VDOUT = 0.5V IDOUTVD Output Current (note 9) 3.0VIN = 2.0V 4.0VIN = 3.0V 5.0VIN = 4.0V 5mA 6.0 8.0 10.0 12.07.0VIN = 5.0V 15.010.0VIN = 6.0V (i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value). (NOTE 3) V OUT(E)=Actual VR Output Voltage. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V. ∆Topr ⋅ VDF 4ppm / OC±100 kΩ 6 VIN=VROUT(T)+2.0V VIN=VROUT(T)+2.0V, When VROUT(T)>4.0V, VIN=6.0V 1mA VROUT(T)+1.0V<VIN<6.0V Vdif1 When VROUT<1.75V, IROUT=10mA ∆VROUT When VROUT<0.9V, 2.0V<VIN<6.0V ∆VIN ⋅ VROUT IROUT=30mA Semiconductor Ltd. Data Sheet 14

High Current, High Speed LDO Regulators, Voltage Detector Function ! VR DROPOUT VOLTAGE 4.692 60 80 180 210 210 70 160 230 230 5.096 4.410 4.590 60 5.304 230 230 4.312 4.488 60 80 180 230 3.920 4.116 4.284 60 4.080 60 4.10 180 230 230 80 180 230 180 80 180 4.018 4.182 60 4.214 4.386 60 80 180 90 200 2503.822 3.978 60 200 250 3.626 3.774 3.724 3.876 60 90 60 90 200 250 200 250 200 250 3.528 3.672 60 90 3.430 3.570 60 90 200 250 3.234 3.366 3.332 3.468 60 90 60 90 200 250 200 250 200 250 3.136 3.264 60 90 3.038 3.162 60 90 220 270 2.940 3.060 60 90 200 270 2.842 2.958 70 100 290 2.744 2.856 70 100 220 270 2.754 220 290 220 2902.652 70 100 70 100 2.550 70 100 220 310 2.352 2.448 80 120 240 310 2.346 80 120 330 2.156 2.244 80 120 240 330 2.142 80 380 1.960 2.040 80 120 240 350 1.938 300 400 400 400 1.764 1.836 200 300 3.50 3.60 1.568 1.666 1.862 2.058 2.254 2.450 2.646 2.548 3.10 3.20 3.30 3.40 2.70 2.80 2.90 3.00 2.30 2.40 2.50 2.60 1.90 2.00 2.10 2.20 E-0 1.632 0.870 0.970 1.070 1.170 1.230 OUTPUT VOLTAGE DETECT VOLTAGE (V) 1.270 Vdif2Vdif1 500 500 600 550 700 1100 MAX. 750 Vdif2 120 150 280 120 240 240 5.202 50 70 160 230 5.406 180 230 80 180 4.998 60 80 180 5.610 1.734 300 900 1.430 600 700 650 800 1.330 500 800 900 850 400 600 700 800 TYP. MAX. 0.930 1050 1100 1150 1200 5.100 50 4.998 5.194 5.292 5.390 5.40 5.50 5.508 4.508 4.606 4.794 4.704 4.896 4.802 4.900 1.370 1.470 1.530 500 1000 1.030 1000 1100 1050 1200 1.130 900 1000 950 Vdif1 MIN. MAX. TYP. VROUT / VDF Ta=25 OCTa=25OC E-1 DROPOUT VOLTAGE 1 (mV) (IOUT=30mA) E-1 DROPOUT VOLTAGE 2 (mV) (IOUT=100mA) SYMBOL VROUT(T) VDF(T) 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 3.70 3.80 3.90 4.00 4.20 4.30 4.40 4.50 4.60 4.70 4.80 4.90 5.00 5.10 5.20 5.30 PARAMETER SPECIFIED DETECT VOLTAGE OUTPUT VOLTAGE Semiconductor Ltd. Data Sheet 15

High Current, High Speed LDO Regulators, Voltage Detector Function ! TEST CIRCUITS #Circuit 1 XC6405A ~ C Series XC6405D Series XC6405E Series XC6405F Series Output Capacitor Corresponding Char t 1.8V ~ 5.1V more than 1.0µF VROUT CL 0.9 ~1.2V more than 4.7µF more than 2.2 µF 1.3 ~ 1.7V Semiconductor Ltd. VIN VROUT VSS EN VDOUT V CL=uF (ceramic) RLV A A CIN=1uF (ceramic) V VIN VIN VROUT VSS Cd VDOUT V RL A A VIN CL=uF (ceramic) CIN=1uF (ceramic) VIN VROUT VSS VSEN VDOUT V CL= uF (Ceramic) RL A A CIN= 1uF (Ceramic) VIN VIN VROUT VSS CE VDOUT V RLV A A V VIN CL=uF (ceramic) CIN=1uF (ceramic) Data Sheet 16

High Current, High Speed LDO Regulators, Voltage Detector Function ! TEST CIRCUITS (Continued) #Circuit 2 XC6405A ~ C Series XC6405D Series XC6405E Series XC6405F Series Semiconductor Ltd. VIN VROUT VSS EN VDOUT A VIN A CIN=1uF (ceramic) VIN VROUT VSS CE VDOUT A VIN A CIN=1uF (ceramic) VIN VROUT VSS VSEN VDOUT A VIN CIN=1uF (ceramic) VIN VROUT VSS Cd VDOUT A VIN CIN=1uF (ceramic) Data Sheet 17

High Current, High Speed LDO Regulators, Voltage Detector Function ! TEST CIRCUITS (Continued) #Circuit 3 XC6405A ~ C Series XC6405D Series XC6405E Series XC6405F Series Output Capacitor Corresponding Char t 1.8 ~ 5.1V more than 1.0µF VROUT 0.9 ~1.2V 1.3 ~ 1.7V CL more than 4.7 µF more than 2.2 µF VROUT ≤ 1.25V VIN={2.25V}VDC +0.5Vp-pAC VIN={VROUT+1.0V}VDC +0.5Vp-pAC VROUT ≥ 4.75V VIN={5.75V}VDC +0.5Vp-pAC VROUT ≤ 1.25V VIN={2.25V}VDC +0.5Vp-pAC VIN={VROUT+1.0V}VDC +0.5Vp-pAC VROUT ≥ 4.75V VIN={5.75V}VDC +0.5Vp-pAC VROUT ≤ 1.25V VIN={2.25V}VDC +0.5Vp-pAC VIN={VROUT+1.0V}VDC +0.5Vp-pAC VROUT ≥ 4.75V VIN={5.75V}VDC +0.5Vp-pAC VROUT ≤ 0.9V VIN={2.0V}VDC +0.5Vp-pAC VIN={VROUT+1.0V}VDC +0.5Vp-pAC VROUT ≥ 4.75V VIN={5.75V}VDC +0.5Vp-pAC Semiconductor Ltd. VIN VROUT VSS EN VDOUT IROUT=50mA CL=uF (ceramic)V V VIN VROUT VSS CE VDOUT IROUT=50mA CL=uF (ceramic) V V VIN VROUT VSS VSEN VDOUT IROUT=50mA CL=uF (ceramic)V V VIN VROUT VSS Cd VDOUT IROUT=50mA CL=uF (ceramic) V V ~ ~ ~ ~ Data Sheet 18

High Current, High Speed LDO Regulators, Voltage Detector Function ! TEST CIRCUITS (Continued) #Circuit 4 XC6405A ~ C Series [VD Sense, VIN type] [VD Sense, VROUT type] XC6405D Series [VD Sense, VIN type] [VD Sense, VROUT type] XC6405E Series XC6405F Series [VD Sense, VIN type] [VD Sense, VROUT type] Semiconductor Ltd. VIN VROUT VSS Cd VDOUT VDS VIN A VIN VROUT VSS Cd VDOUT VDS VIN A CL=1uF (ceramic) CL=1uF (ceramic) VIN VROUT VSS EN VDOUT 100kΩ VIN V CL=1uF (ceramic) VIN VROUT VSS EN VDOUT 100kΩ VIN V CL=1uF (ceramic) VIN VROUT VSS CE VDOUT 100kΩ VIN V CL=1uF (ceramic) VIN VROUT VSS VSEN VDOUT 100kΩ VIN V CL=1uF (ceramic) VIN VROUT VSS CE VDOUT 100kΩ VIN V CL=1uF (ceramic) Data Sheet 19

High Current, High Speed LDO Regulators, Voltage Detector Function ! TEST CIRCUITS (Continued) #Circuit 5 XC6405A ~ C Series [VD Sense, VIN type] [VD Sense, VROUT type] XC6405D Series [VD Sense, VIN type] [VD Sense, VROUT type] XC6405E Series XC6405F Series [VD Sense, VIN type] [VD Sense, VROUT type] Semiconductor Ltd. VIN VROUT VSS EN VDOUT VDS VIN A VIN VROUT VSS EN VDOUT VDS VIN A CL=1uF (ceramic) CL=1uF (ceramic) VIN VROUT VSS CE VDOUT VDS VIN A VIN VROUT VSS CE VDOUT VDS VIN A CL=1uF (ceramic) CL=1uF (ceramic) VIN VROUT VSS VSEN VDOUT VDS VIN A CL=1uF (ceramic) VIN VROUT VSS Cd VDOUT VDS VIN A VIN VROUT VSS Cd VDOUT VDS VIN A CL=1uF (ceramic) CL=1uF (ceramic) Data Sheet 20

High Current, High Speed LDO Regulators, Voltage Detector Function ! TEST CIRCUITS (Continued) #Circuit 6 XC6405F Series [VD Sense, VIN type] [VD Sense, VROUT type] Semiconductor Ltd. VIN VROUT VSS Cd VDOUTVIN A CL=1uF (ceramic) VIN VROUT VSS Cd VDOUTVIN A CL=1uF (ceramic) Data Sheet 21

High Current, High Speed LDO Regulators, Voltage Detector Function !BLOCK DIAGRAMS Semiconductor Ltd. XC6405A, B Series XC6405C, D Series Optional: Active HIGH with Pull-down R Active HIGH with no Pull-down R Active LOW with Pull-up R Active LOW with no Pull-up R VR circuitEN VSS VROUT VIN TQ R toggle FF VDOUT Comp. VD Error Amp. Power ON Clear for FF Optional (B Series) Optional: Detect H Detect L CFB Optional: VIN SENSE VROUT SENSE VR circuit (C Series) each circuit (D Series)EN / CE VSS VROUT VIN VDOUT Comp. VD Error Amp. Optional: Detect H Detect L CFB

1 Shot

Optional: VIN SENSE VROUT SENSE ON / OFF Control Control ON / OFF Optional: Active HIGH with Pull-down R Active HIGH with no Pull-down R Active LOW with Pull-up R Active LOW with no Pull-up R Data Sheet 22

High Current, High Speed LDO Regulators, Voltage Detector Function !BLOCK DIAGRAMS (Continued) Semiconductor Ltd. XC6405E Series XC6405F Series VSEN VSS VROUT VIN VDOUT Comp. VD Error Amp. Optional: Detect H Detect L CFB Rdelay VSS VROUT VIN VDOUT Comp. VD Error Amp. Rdelay Optional: Detect H Detect L CFB Optional: VIN SENSE VROUT SENSE Current Limit Voltage Reference Current Limit Voltage Reference Data Sheet 23

High Current, High Speed LDO Regulators, Voltage Detector Function ! OPERATIONAL EXPLANATION <Output voltage regulator control> <Detector function with the XC6405 series> Delay Time Rdelay standard : 300 ~ 700kΩ TYP : 500kΩ <Low ESR Capacitors> Output Capacitor <Current Limiter, Short-Circuit Protection> 1.8 ~ 5.1V more than 1.0µF Cdelay DELAY TIME (TYP.) DELAY TIME (TYP.) 0.01 µF 3.5 msec 2.1 ~ 4.9 msec 0.047 µF 16.5 msec 9.87 ~ 23.0 msec 0.1 µF 35 msec 21.0 ~ 49.0 msec 0.022 µF 7.7 msec 4.62 ~ 10.8 msec 0.22 µF 77 msec 46.2 ~ 108.0 msec 0.47 µF 165 msec 98.7 ~ 230.0 msec more than 4.7µF more than 2.2 µF 1 µF 350 msec 210.0 ~ 490.0 msec VROUT The XC6405 series regulator offers a combination of current limit and circuit protection by means of a built-in fixed current limiter circuit and a foldback circuit. When the load current reaches the current limit level, the fixed current limiter circuit operates and output voltage drops. As a result of this drop in output voltage, the foldback circuit operates, the output voltage drops further and output current decreases. When the output pin is shorted, a current of about 50mA flows. CL The voltage, divided by resistors R1 & R2 which are connected to the VROUT pin is compared with the internal reference voltage by the error amplifier. The P-Channel MOSFET, which is connected to the VROUT pin, is then driven by the subsequent output signal. The output voltage at the VROUT pin is controlled & stabilized by negative feedback. The current limit circuit and short circuit protection operate in relation to the level of output current. Further, the voltage regulator's internal circuitry can be shutdown via the EN or CE pin's signal. With the XC6405 series regulator, a stable output voltage is achievable even if low ESR capacitors are used, as a phase compensation circuit is built-in to the regulator. In order to ensure the effectiveness of the phase compensation, we suggest that an output capacitor (CL) be connected as close as possible, between the output pin (VROUT) and the VSS pin. Please use an output capacitor (CL) with a capacitance, based on the chart below. We also suggest an input capacitor (CIN) of 1µF : this should be connected between VIN and VSS in order to stabilize input power source. For the XC6405A, B, C type, in stand-by, if a voltage of the recovery voltage is present at the VROUT pin (from another power source), the VDOUT pin will be high impedance mode, and the pull up voltage will be output at VDOUT. By connecting the Cdelay pin to a capacitor (Cd), the XC6405F series can apply a delay time to VDOUT voltage when releasing voltage. The delay time can be calculated from the internal resistance, Rdelay (500kΩ fixed) and the value of Cd as per the following equation. Delay Time = Cdelay x Rdelay x 0.7 The series' detector function monitors the voltage divided by resistors R3 & R4 which are connected to the VROUT pin or the VIN pin or the VSEN pin, as well as monitoring the voltage of the internal reference voltage source via the comparator. The VDSEN pin has options (please refer to the Selection Guide, item 4 on page 2). A 'High' or 'Low' signal level can be output from the VDOUT pin when the VD pin voltage level goes below the detect voltage. The VD output logic has options (please refer to the Selection Guide, item 5 on page 2). As VDOUT is an open-drain N-channel output, a pull-up resistor of about 220KΩ is needed to achieve a voltage output. Because of hysteresis at the detector function, output at the VDOUT pin will invert when the detect voltage level increases above the release voltage (105% of the detect voltage). Even when the XC6405A, B, C, series are in stand-by mode, the voltage detector function operates and the output voltage at VDOUT will output according to the voltage level at VDSENSE voltage. Semiconductor Ltd. Data Sheet 24

High Current, High Speed LDO Regulators, Voltage Detector Function ! OPERATIONAL EXPLANATION (Continued) <EN / CE Pin> ( * A ~ D Series) <Toggle Operation> XC6405 * E ~ K Active HIGH with no pull down XC6405 * L ~ P Input Current = VIN voltage / Pull Up Resistance In stand-by mode, the above input current can be reduced by connecting a pull-up resistor between VROUT and VDOUT. Note that as the XC6405*E to K types of the XC6405A to D series are 'Active HIGH / No Pull Down' and XC6405*R to U types of the XC6405A to D series are 'Active LOW / No Pull Up', operations will become unstable with the CE pin open (See the chart below). SERIES EN/CE INPUT LOGIC EN Logic Active "HIGH" The IC's internal regulator circuitry can be shut down via the signal from the EN pin with the XC6405A, B, C series. In shutdown mode, output at the VROUT pin will be pulled down to the VSS level via R1 & R2. The whole IC's circuitry can be shut down via CE pin with the XC6405D series and power consumption can be reduced to around 0 µA. While the voltage detector is in shutdown mode, the voltage detector output is in a post-detection state. When choosing Detect L, input current can be set by using the following formula. The XC6405 A and B series have a built-in toggle ON/OFF switch which repeats an on/off operation via the EN pin's leading edge signal when the EN logic is Active HIGH, and via the EN pin's falling edge signal when the EN logic is Active LOW (Please also refer the figure below). The EN input signal duration should be over 500nsec. If the EN input signal is less than 500nsec, it is possible that the circuit fails to respond and the toggle function does not operate. To operate the toggle function properly when the EN pin voltage noise is large, a RC filter should be used to reduce the noise in the signal to the EN pin. In the case where input delay time is required, it is possible to set the time constant by connecting an RC network to the EN pin. We suggest that you use this IC with either a VIN voltage or a VSS voltage input at the EN or CE pin. If this IC is used with the correct specifications for the EN or CE pin, the IC will operate normally. However, supply current may increase as a result of through current in the IC's internal circuitry if a voltage other than VIN or VSS is applied. Active LOW with pull up XC6405 * R ~ U Active LOW with no pull up XC6405 * A ~ D Active HIGH with pull down Semiconductor Ltd. Rpull 220kΩ CIN 1uF 1.5kΩ 0.1uF VIN VIN Voltage GND EN pin signal VROUT Voltage VROUT Voltage GND More than 500nsec Internal Circuit - Response time apporx. 10usec. VIN VSS EN VROUT VDOUT 1uF CL Data Sheet 25

High Current, High Speed LDO Regulators, Voltage Detector Function ! OPERATIONAL EXPLANATION (Continued) <Toggle Operation> (Continued) Block Diagram for XC6405B series Timing Chart The type which applies the reset signal to the T-FF internally via a one-shot pulse circuit changes the voltage detector comparator output signal to a one- shot signal internally. Like the type which applies the reset directly via the signal from voltage detector function, this type also applies the reset to the T- FF and sets the VR output to OFF when the input voltage (VIN Sense type) and output voltage (VROUT Sense type) drop below the detect voltage level. This type can return the VR output by inputting a toggle signal, even when the Sense pin voltage (VIN or VROUT pin voltage) is below the release voltage. Please refer to the block diagram below and the timing chart on the following page. Please choose the option suitable to the application. For the XC6405B series, there are two types of toggle selection; one is a T-type flip-flop (T-FF) used for toggle operation which can be reset internally by a signal directly from the voltage detector (VIN Sense type only. See also the Selection Guide on page 2). The other type is where the reset is applied internally through a one shot pulse circuit (VIN, VROUT type only. See also the Selection Guide on page 2). The type, which applies the reset directly via the signal from the voltage detector function, applies the voltage detector comparator's output signal (reset signal) to the reset of T-FF reset, and turns the VR output OFF when the input voltage decreases below the detect voltage due to battery consumption, etc.. In order to return the VR output, apply a voltage larger than the release voltage to VIN and input a toggle signal to the T-FF. In the case where input voltage is below the release voltage, the VR output does not return even though the toggle signal is input into the T-FF. Current ON/OFF Voltage Reference VR circuitEN VSS VROUT VIN T Q R toggle FF Comp. VD Error Amp. Power ON Clear for FF CFB Optional Toggle Signal T-FF Reset Signal A B D C E F Optional limit control Pulse Semiconductor Ltd. Data Sheet 26

High Current, High Speed LDO Regulators, Voltage Detector Function ! TIMING CHART " Using the VD output level signal as the reset signal of T-FF (VD Sense = VIN PIN) " Changing the VD output level signal into a one shot pulse to use T-FF as the reset signal (VD Sense = VIN PIN) " Changing the VD output level signal into a one shot pulse to use T-FF as the reset signal (VD Sense = VROUT PIN) # Toggle Signal Detec t V oltage Release VoltageLithium Ion Voltage # VI N P I N 4.2V VSS # VR OU T P I N Intrenal IC Response Time About 20usec VROUT Voltage VSS VIN # T-FF Reset Signal Internal IC Response Time About 20usec Reset Signal (VD Comp Output Signal) VSS Internal IC Response TIme About 20usec # VD OU T P I N Detect L VSS Pull-up Voltage A B D E F # Toggle Signal # VI N P I N # VR OU T P I N # T-FF Reset Signal # VD OU T P I N Detect L VROUT Voltage Pull-up Voltage Detect Voltage Release Voltage Intrenal IC Response Time About 20usec Internal IC Response Time Internal IC Response TIme About 20usecAbout 20usec Lithium Ion Voltag e Internal IC Response Time About 20usec 4.2V VSS VSS VIN VSS Reset Signal (1 Shot Pulse) VSS C A D E F Semiconductor Ltd. # Toggle Signal # VIN PIN # VROUT PIN # T-FF Reset Signal # VDOUT PIN Detect L VROUT Voltage Pull-up Voltage Detect Voltage Release Voltage Intrenal IC Response Time About 20usec Internal IC Response Time Internal IC Response TIme About 20u secAbout 20u sec Lithium Ion Voltage Internal IC Response TIme About 20u sec Reset Signal ( 1 Shot Pulse) 4.2V VSS VIN VSS VSS C A D E F VSS The circled letters correspond to those shown on the block diagram on page 26. Data Sheet 27

High Current, High Speed LDO Regulators, Voltage Detector Function ! NOTES ON USE 1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be exceeded. 2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current. Please strengthen VIN and VSS wiring in particular. 3. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible. Should rapid input fluctuation or load fluctuation occur, please increase the capacitor value such as CIN or CL to stabilize the operation. Semiconductor Ltd. Data Sheet 28

High Current, High Speed LDO Regulators, Voltage Detector Function ! TYPICAL PERFORMANCE CHARACTERISTICS (1) VR Output Voltage vs. VR Output Current XC6405 Series (VR:3.0V) XC6405 Series (VR:3.0V) XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT(V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT(V) 0.0 0.5 1.0 1.5 2.0 2.5 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT(V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT (V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT (V) 0.0 0.5 1.0 1.5 2.0 2.5 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT(V) VIN=3.8V, CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 25OC Topr= - 40OC Topr= 85OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) VIN= 3.8V VIN= 2.1V VIN= 6.0V Topr= 25OC Topr= - 40OC Topr= 85OC VIN=5.0V, CIN=1.0uF (ceramic), CL=1.0uF (ceramic) CIN=1.0uF (ceramic), CL=1.0uF (ceramic) VIN= 4.5V VIN= 2.8V VIN= 6.0V Topr= 25OC Topr= - 40OC Topr= 85OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) VIN= 5.0V VIN= 6.0V Semiconductor Ltd. VIN=4.5V, CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Data Sheet 29

High Current, High Speed LDO Regulators, Voltage Detector Function (1) VR Output Voltage vs. VR Output Current (Continued) XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT(V) 0.0 0.3 0.6 0.9 1.2 1.5 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT(V) 0.0 0.3 0.6 0.9 1.2 1.5 0 100 200 300 400 500 600 700 Output Current IROUT(mA) Output Voltage VROUT(V) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 100 200 300 400 500 600 700 Output Current IROUT (mA) Output Voltage VROUT (V) VIN=6.0V, CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 25OC Topr= - 40OC Topr= 85OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) VIN= 6.0V VIN=2.9V, CIN=1.0uF (ceramic), CL=4.7uF (ceramic) Topr= 25OC Topr= - 40OC Topr= 85OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) VIN= 2.0V VIN= 2.9V VIN= 6.0V Semiconductor Ltd. Data Sheet 30

High Current, High Speed LDO Regulators, Voltage Detector Function (2) VR Output Voltage vs. Input Voltage XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) 0.5 0.7 0.9 1.1 1.3 1.5 Input Voltage VIN (V) Output Voltage VROUT (V) 0.60 0.80 1.00 Input Voltage VIN (V) Output Voltage VROUT (V) 2.40 2.45 2.50 2.55 2.60 Input Voltage VIN (V) Output Voltage VROUT (V) 1.7 1.9 2.1 2.3 2.5 2.7 2.0 2.5 3.0 Input Voltage VIN (V) Output Voltage VROUT (V) 1.65 1.70 1.75 1.80 1.85 1.90 Input Voltage VIN (V) Output Voltage VROUT (V) 1.0 1.2 1.4 1.6 1.8 2.0 1.3 1.8 2.3 Input Voltage VIN (V) Output Voltage VROUT (V) Topr=25OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) IOUT=0mA 1mA 30mA 100mA Topr=25OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) IOUT=0mA 1mA 30mA 100mA Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) IOUT=0mA 1mA 30mA 100mA IOUT=0mA 1mA 30mA 100mA IOUT=0mA 1mA 30mA 100mA IOUT=0mA 1mA 30mA 100mA Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Semiconductor Ltd. Data Sheet 31

High Current, High Speed LDO Regulators, Voltage Detector Function (2) VR Output Voltage vs. Input Voltage (Continued) XC6405 Series (VR:3.0V) XC6405 Series (VR:3.0V) XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) 4.85 4.90 4.95 5.00 5.05 5.10 Input Voltage VIN (V) Output Voltage VROUT (V) 2.85 2.90 2.95 3.00 3.05 3.10 Input Voltage VIN (V) Output Voltage VROUT (V) 4.2 4.4 4.6 4.8 5.0 5.2 4.5 5.0 5.5 Input Voltage VIN (V) Output Voltage VROUT (V) 2.2 2.4 2.6 2.8 3.0 3.2 2.5 3.0 3.5 Input Voltage VIN (V) Output Voltage VROUT (V) Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) IOUT=0mA 1mA 30mA 100mA IOUT=0mA 1mA 30mA 100mA Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr=25OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) IOUT=0mA 1mA 30mA 100mA IOUT=0mA 1mA 30mA 100mA Semiconductor Ltd. Data Sheet 32

High Current, High Speed LDO Regulators, Voltage Detector Function (3) Dropout Voltage vs. VR Output Current XC6405 Series (VR:3.0V) XC6405 Series (VR:0.9V) XC6405 Series (VR:1.8V) XC6405 Series (VR:5.0V) XC6405 Series (VR:2.5V) 0.6 0.8 1.2 1.4 1.6 0 50 100 150 200 VR Output Current IROUT (mA) Dropout Voltage Vdif (V) 0.2 0.4 0.6 0.8 0 50 100 150 200 VR Output Current IROUT (mA) Dropout Voltage Vdif (V) 0.2 0.4 0.6 0.8 0 50 100 150 200 VR Output Current IROUT (mA) Dropout Voltage Vdif (V) 0.2 0.4 0.6 0.8 0 50 100 150 200 VR Output Current IROUT (mA) Dropout Voltage Vdif (V) 0.2 0.4 0.6 0.8 0 50 100 150 200 VR Output Current IROUT (mA) Dropout Voltage Vdif (V) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Semiconductor Ltd. Data Sheet 33

High Current, High Speed LDO Regulators, Voltage Detector Function (4) Supply Current vs. Input Voltage XC6405 Series (VR:5.0V) XC6405 Series (VR:3.0V) XC6405 Series (VR:0.9) XC6405 Series (VR:2.5V) XC6403 Series (VR:1.8V) 100 120 Input Voltage VIN (V) Supply Current ISS (uA) 100 120 Input Voltage VIN (V) Supply Current ISS (uA) 100 120 Input Voltage VIN (V) Supply Current ISS (uA) 100 120 Input Voltage VIN (V) Supply Current ISS (uA) 100 120 Input Voltage VIN (V) Supply Current ISS (uA) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Topr= 85OC 25OC - 40OC CIN=1.0uF (ceramic), CL=1.0uF (ceramic) Semiconductor Ltd. Data Sheet 34

High Current, High Speed LDO Regulators, Voltage Detector Function (5) VR Output Voltage vs. Operating Temperature XC6405 Series (VR:0.9) XC6403 Series (VR:1.8V) XC6405 Series (VR:2.5V) XC6405 Series (VR:5.0V) XC6405 Series (VR:3.0V) 0.60 0.70 0.80 0.90 1.00 1.10 -50 -25 0 25 50 75 100 Operating Temperature Topr ( OC) Output Voltage VROUT (V) 4.80 4.85 4.90 4.95 5.00 5.05 5.10 5.15 5.20 -50 -25 0 25 50 75 100 Output Voltage VROUT (V) 2.80 2.85 2.90 2.95 3.00 3.05 3.10 3.15 3.20 -50 -25 0 25 50 75 100 Output Voltage VROUT (V) 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 -50 -25 0 25 50 75 100 Output Voltage VROUT (V) 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 -50 -25 0 25 50 75 100 Operating Temperature Topr ( OC) Output Voltage VROUT (V) VIN=2.0V CIN=1.0uF (ceramic), CL=4.7uF (ceramic) IOUT=0mA =30mA =100mA VIN=2.8V CIN=1.0uF (ceramic), CL=1.0uF (ceramic) IOUT=0mA =30mA =100mA Operating Temperature Topr (OC) VIN=3.5V CIN=1.0uF (ceramic), CL=1.0uF (ceramic) IOUT=0mA =30mA =100mA Operating Temperature Topr (OC) VIN=4.0V CIN=1.0uF (ceramic), CL=1.0uF (ceramic) IOUT=0mA =30mA =100mA VIN=6.0V CIN=1.0uF (ceramic), CL=1.0uF (ceramic) IOUT=0mA =30mA =100mA Operating Temperature Topr (OC) Semiconductor Ltd. Data Sheet 35

High Current, High Speed LDO Regulators, Voltage Detector Function (6) Supply Current vs. Operating Temperature XC6405 Series (VR:5.0V) XC6405 Series (VR:0.9) XC6403 Series (VR:1.8V) XC6405 Series (VR:2.5V) XC6405 Series (VR:3.0V) 100 -50 -25 0 25 50 75 100 Supply Current ISS (uA) 110 -50 -25 0 25 50 75 100 Supply Current ISS (uA) 110 -50 -25 0 25 50 75 100 Supply Current ISS (uA) 110 -50 -25 0 25 50 75 100 Supply Current ISS (uA) 110 -50 -25 0 25 50 75 100 Supply Current ISS (uA) VIN=2.0V Operating Temperature Topr (OC) Operating Temperature Topr (OC) VIN=2.8V Operating Temperature Topr (OC) Operating Temperature Topr (OC) VIN=3.5V VIN=4.0V VIN=6.0V Operating Temperature Topr (OC) Semiconductor Ltd. Data Sheet 36

High Current, High Speed LDO Regulators, Voltage Detector Function (7) EN/CE Threshold Voltage vs. Operating Temperature (8) Rdelay vs. Operating Temperature (9) Output Noise Density 100 200 300 400 500 600 700 800 -50 -25 0 25 50 75 100 Delay(kΩ) 0.01 0.1 0.1 1 10 100 Frequency f (kHz) Output Noise Density (uV/RootHz) 0.70 0.80 0.90 1.00 1.10 -50 -25 0 25 50 75 100 EN/CE Threshold Voltage VEN/CEH,VEN/CEL (V) VIN=VROUT+1.0V, IOUT=30mA CIN=CL=1.0uF (ceramic) L Level Voltage H Level Voltage Operating Temperature Topr (OC) Operating Temperature Topr (OC) VIN=4.0V IOUT=10mA, CIN=CL=10uF (ceramic) Semiconductor Ltd. Data Sheet 37

High Current, High Speed LDO Regulators, Voltage Detector Function (10) VD Supply Current vs. Input Voltage (For A to C Series only) XC6405 Series (VD:2.0V) XC6405 Series (VD:2.7V) XC6405 Series (VD:3.6V) XC6405 Series (VD:5.0V) 0123456 Input Voltage VIN (V) Supply Current ISS (uA) 0123456 Input Voltage VIN (V) Supply Current ISS (uA) 0123456 Input Voltage VIN (V) Supply Current ISS (uA) 0123456 Input Voltage VIN (V) Supply Current ISS (uA) Topr= 85OC 25OC - 40OC Topr= 85OC 25OC - 40OC Topr= 85OC 25OC - 40OC Topr= 85OC 25OC - 40OC Semiconductor Ltd. Data Sheet 38

High Current, High Speed LDO Regulators, Voltage Detector Function (11) Detect Voltage & Release Voltage vs. Operating Temperature XC6405 Series (VD:3.6V) XC6405 Series (VD:5.0V) XC6405 Series (VD:2.0V) XC6405 Series (VD:2.7V) 4.90 5.00 5.10 5.20 5.30 5.40 -50 -25 0 25 50 75 100 Detect Voltage, Release Voltage VDF,VDR (V) 3.50 3.55 3.60 3.65 3.70 3.75 3.80 -50 -25 0 25 50 75 100 Detect Voltage, Release Voltage VDF,VDR (V) 2.60 2.65 2.70 2.75 2.80 2.85 2.90 -50 -25 0 25 50 75 100 Detect Voltage, Release Voltage VDF,VDR (V) Operating Temperature Topr (OC) Operating Temperature Topr (OC) Operating Temperature Topr (OC)Operating Temperature Topr (OC) 1.90 1.95 2.00 2.05 2.10 2.15 2.20 -50 -25 0 25 50 75 100 Detect Voltage, Release Voltage VDF,VDR (V) VDR VDF VDR VDF Operating Temperature Topr (OC) VDR VDF VDR VDF Semiconductor Ltd. Data Sheet 39

High Current, High Speed LDO Regulators, Voltage Detector Function (12) VD N-ch Driver Tr. Output Current vs. VDS XC6405 Series (VD:3.6V) XC6405 Series (VD:5.0V) XC6405 Series (VD:2.0V) XC6405 Series (VD:2.7V) 01234 VDS (V) Output Current IOUT (mA) 01234 VDS (V) Output Current IOUT (mA) 0 0.5 1 1.5 2 2.5 3 VDS (V) Output Current IOUT (mA) 0 0.5 1 1.5 2 2.5 VDS (V) Output Current IOUT (mA) Topr=25OC Topr=25OCTopr=25OC VIN=2.0V VIN=2.0V VIN=2.5V VIN=2.0V VIN=1.5V VIN=1.0V VIN=2.5V VIN=2.0V VIN=1.5V VIN=3.0V VIN=1.5V VIN=2.5V VIN=3.5V VIN=4.5V Semiconductor Ltd. Data Sheet 40

High Current, High Speed LDO Regulators, Voltage Detector Function (13) VD N-ch Driver Tr. Output Current vs. Input Voltage XC6405 Series (VD:2.0V) XC6405 Series (VD:2.7V) XC6405 Series (VD:3.6V) XC6405 Series (VD:5.0V) 0123456 Input Voltage VIN (V) Output Current IOUT (mA) 01234 Input Voltage VIN (V) Output Current IOUT (mA) 01234 Input Voltage VIN (V) Output Voltage IOUT (mA) 0 0.5 1 1.5 2 2.5 Input Voltage VIN (V) Output Current IOUT (mA) VDS=0.5V 25OC -40OC 85OC 25OC VDS=0.5V -40OC 85OC VDS=0.5V 25OC -40OC 85OC VDS=0.5V 25OC -40OC 85OC Semiconductor Ltd. Data Sheet 41

High Current, High Speed LDO Regulators, Voltage Detector Function (14) Input Transient Response XC6405 Series (VR:0.9V) XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) Time (40usec/div) Input Voltage VIN (V) 0.7 0.8 0.9 1.0 1.1 1.2 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 1.76 1.78 1.80 1.82 1.84 1.86 1.88 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 1.76 1.78 1.80 1.82 1.84 1.86 1.88 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 0.7 0.8 0.9 1.0 1.1 1.2 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 1.76 1.78 1.80 1.82 1.84 1.86 1.88 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 0.7 0.8 0.9 1.0 1.1 1.2 Output Voltage VOUT (V) IOUT=1mA, tr=tf=5.0usec, CL=4.7uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=30mA, tr=tf=5.0usec, CL=4.7uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=100mA, tr=tf=5.0usec, CL=4.7uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=1mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=30mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=100mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage Semiconductor Ltd. Data Sheet 42

High Current, High Speed LDO Regulators, Voltage Detector Function (14) Input Transient Response (Continued) XC6405 Series (VR:3.0V) XC6405 Series (VR:3.0V) XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:3.0V) Time (40usec/div) Input Voltage VIN (V) 2.96 2.98 3.00 3.02 3.04 3.06 3.08 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 2.96 2.98 3.00 3.02 3.04 3.06 3.08 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 2.96 2.98 3.00 3.02 3.04 3.06 3.08 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 2.46 2.48 2.50 2.52 2.54 2.56 2.58 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 2.46 2.48 2.50 2.52 2.54 2.56 2.58 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 2.46 2.48 2.50 2.52 2.54 2.56 2.58 Output Voltage VOUT (V) IOUT=1mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=30mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=100mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=1mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=30mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=100mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage Semiconductor Ltd. Data Sheet 43

High Current, High Speed LDO Regulators, Voltage Detector Function (14) Input Transient Response (Continued) XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) Time (40usec/div) Input Voltage VIN (V) 4.96 4.98 5.00 5.02 5.04 5.06 5.08 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 4.96 4.98 5.00 5.02 5.04 5.06 5.08 Output Voltage VOUT (V) Time (40usec/div) Input Voltage VIN (V) 4.96 4.98 5.00 5.02 5.04 5.06 5.08 Output Voltage VOUT (V) IOUT=1mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=30mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage IOUT=100mA, tr=tf=5.0usec, CL=1.0uF (ceramic), Topr=25OC Input Voltage Output Voltage Semiconductor Ltd. Data Sheet 44

High Current, High Speed LDO Regulators, Voltage Detector Function (15) Load Transient Response XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) 1.60 1.65 1.70 1.75 1.80 1.85 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 1.60 1.65 1.70 1.75 1.80 1.85 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 1.60 1.65 1.70 1.75 1.80 1.85 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 0.70 0.75 0.80 0.85 0.90 0.95 1.00 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 300 Output Current IOUT (mA) 0.70 0.75 0.80 0.85 0.90 0.95 1.00 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 300 Output Current IOUT (mA) 0.70 0.75 0.80 0.85 0.90 0.95 1.00 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 300 Output Current IOUT (mA) Output Current Output Voltage VIN=2.0V, tr=tf=5.0usec, Topr=25OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) Output Current Output Voltage VIN=2.0V, tr=tf=5.0usec, Topr=25OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) Output Current Output Voltage VIN=2.0V, tr=tf=5.0usec, Topr=25OC CIN=1.0uF (ceramic), CL=4.7uF (ceramic) VIN=2.8V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=2.8V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=2.8V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage Semiconductor Ltd. Data Sheet 45

High Current, High Speed LDO Regulators, Voltage Detector Function (15) Load Transient Response (Continued) XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:3.0V) XC6405 Series (VR:3.0V) XC6405 Series (VR:3.0V) XC6405 Series (VR:2.5V) 2.30 2.35 2.40 2.45 2.50 2.55 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 2.30 2.35 2.40 2.45 2.50 2.55 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 2.80 2.85 2.90 2.95 3.00 3.05 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 2.80 2.85 2.90 2.95 3.00 3.05 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 2.80 2.85 2.90 2.95 3.00 3.05 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 2.30 2.35 2.40 2.45 2.50 2.55 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) VIN=2.5V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=2.5V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=2.5V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=4.0V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=4.0V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=4.0V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage Semiconductor Ltd. Data Sheet 46

High Current, High Speed LDO Regulators, Voltage Detector Function (15) Load Transient Response (Continued) XC6405 Series (VR:5.0V)XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) 4.80 4.85 4.90 4.95 5.00 5.05 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 4.80 4.85 4.90 4.95 5.00 5.05 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) 4.80 4.85 4.90 4.95 5.00 5.05 Time (20usec/div) Output Voltage VOUT (V) 100 150 200 250 Output Current IOUT (mA) VIN=6.0V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=6.0V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage VIN=6.0V, tr=tf=5.0usec CIN=CL=1.0uF (ceramic), Topr=25OC Output Current Output Voltage Semiconductor Ltd. Data Sheet 47

High Current, High Speed LDO Regulators, Voltage Detector Function (16) Ripple Rejection Rate XC6405 Series (VR:0.9V) XC6405 Series (VR:1.8V) XC6405 Series (VR:2.5V) XC6405 Series (VR:3.0V) XC6405 Series (VR:5.0V) 0.01 0.1 1 10 100 Ripple Frequency f (kHz) Ripple Rejection Rate RR (dB) 0.01 0.1 1 10 100 Ripple Frequency f (kHz) Ripple Rejection Rate RR (dB) 0.01 0.1 1 10 100 Ripple Frequency f (kHz) Ripple Rejection Rate RR (dB) 0.01 0.1 1 10 100 Ripple Frequency f (kHz) Ripple Rejection Rate RR (dB) 0.01 0.1 1 10 100 Ripple Frequency f (kHz) Ripple Rejection Rate RR (dB) VIN=2.25VDC+0.5Vp-pAC, IOUT=50mA, CL=4.7uF (ceramic) VIN=2.8VDC+1.0Vp-pAC, IOUT=50mA, CL=1.0uF (ceramic) VIN=3.5VDC+1.0Vp-pAC, IOUT=50mA, CL=1.0uF (ceramic) VIN=5.75VDC+0.5Vp-pAC, IOUT=50mA, CL=1.0uF (ceramic) VIN=4.0VDC+1.0Vp-pAC, IOUT=50mA, CL=1.0uF (ceramic) Semiconductor Ltd. Data Sheet 48

High Current, High Speed LDO Regulators, Voltage Detector Function (17) Rising Response Time XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) XC6405 Series (VR:1.8V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) IOUT=30mA, tr=5.0usec VIN=0!2.0V, CL=4.7uF (ceramic) IOUT=1mA, tr=5.0usec VIN=0!2.0V, CL=4.7uF (ceramic) Input Voltage Output Voltage Output Voltage Input Voltage Output Voltage Input Voltage IOUT=100mA, tr=5.0usec VIN=0!2.0V, CL=4.7uF (ceramic) IOUT=1mA, tr=5.0usec VIN=0!2.8V, CL=1.0uF (ceramic) Output Voltage Input Voltage IOUT=30mA, tr=5.0usec VIN=0!2.8V, CL=1.0uF (ceramic) Output Voltage Input Voltage IOUT=100mA, tr=5.0usec VIN=0!2.8V, CL=1.0uF (ceramic) Output Voltage Input Voltage Semiconductor Ltd. Data Sheet 49

High Current, High Speed LDO Regulators, Voltage Detector Function (17) Rising Response Time (Continued) XC6405 Series (VR:3.0V)XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:3.0V) XC6405 Series (VR:3.0V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) IOUT=1mA, tr=5.0usec VIN=0!3.5V, CL=4.7uF (ceramic) Output Voltage Input Voltage IOUT=30mA, tr=5.0usec VIN=0!3.5V, CL=4.7uF (ceramic) Output Voltage Input Voltage IOUT=100mA, tr=5.0usec VIN=0!3.5V, CL=4.7uF (ceramic) Output Voltage Input Voltage IOUT=1mA, tr=5.0usec VIN=0!4.0V, CL=1.0uF (ceramic) Output Voltage Input Voltage IOUT=30mA, tr=5.0usec VIN=0!4.0V, CL=1.0uF (ceramic) Output Voltage Input Voltage IOUT=100mA, tr=5.0usec VIN=0!4.0V, CL=1.0uF (ceramic) Output Voltage Input Voltage Semiconductor Ltd. Data Sheet 50

High Current, High Speed LDO Regulators, Voltage Detector Function (18) EN/CE Rising Response Time XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) IOUT=1mA, tr=5.0usec VIN=0!6.0V, CL=1.0uF (ceramic) Output Voltage Input Voltage IOUT=30mA, tr=5.0usec VIN=0!6.0V, CL=1.0uF (ceramic) Output Voltage Input Voltage IOUT=100mA, tr=5.0usec VIN=0!6.0V, CL=1.0uF (ceramic) Output Voltage Input Voltage Semiconductor Ltd. Data Sheet 51

High Current, High Speed LDO Regulators, Voltage Detector Function (18) EN/CE Rising Response Time (Continued) XC6405 Series (VR:0.9V) XC6405 Series (VR:0.9V) XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:1.8V) XC6405 Series (VR:0.9V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) VIN=2.0V, IOUT=1mA, tr=5.0usec VEN/CE=0!2.0V, CL=4.7uF (ceramic) Output Voltage EN/CE Input Voltage VIN=2.0V, IOUT=30mA, tr=5.0usec VEN/CE=0!2.0V, CL=4.7uF (ceramic) Output Voltage EN/CE Input Voltage VIN=2.0V, IOUT=100mA, tr=5.0usec VEN/CE=0!2.0V, CL=4.7uF (ceramic) Output Voltage EN/CE Input Voltage VIN=2.8V, IOUT=1mA, tr=5.0usec VEN/CE=0!2.8V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage Output Voltage VIN=2.8V, IOUT=30mA, tr=5.0usec VEN/CE=0!2.8V, CL=1.0uF (ceramic) EN/CE Input Voltage Output Voltage VIN=2.8V, IOUT=100mA, tr=5.0usec VEN/CE=0!2.8V, CL=1.0uF (ceramic) EN/CE Input Voltage Semiconductor Ltd. Data Sheet 52

High Current, High Speed LDO Regulators, Voltage Detector Function (18) EN/CE Rising Response Time (Continued) XC6405 Series (VR:3.0V) XC6405 Series (VR:3.0V) XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:2.5V) XC6405 Series (VR:3.0V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) VIN=3.5V, IOUT=1mA, tr=5.0usec VEN/CE=0!3.5V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage VIN=3.5V, IOUT=30mA, tr=5.0usec VEN/CE=0!3.5V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage VIN=3.5V, IOUT=100mA, tr=5.0usec VEN/CE=0!3.5V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage VIN=4.0V, IOUT=1mA, tr=5.0usec VEN/CE=0!4.0V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage VIN=4.0V, IOUT=30mA, tr=5.0usec VEN/CE=0!4.0V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage VIN=4.0V, IOUT=100mA, tr=5.0usec VEN/CE=0!4.0V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage Semiconductor Ltd. Data Sheet 53

High Current, High Speed LDO Regulators, Voltage Detector Function (18) EN/CE Rising Response Time (Continued) XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) XC6405 Series (VR:5.0V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) Time (20usec/div) Input Voltage VIN (V) Output Voltage VOUT (V) VIN=6.0V, IOUT=1mA, tr=5.0usec VEN/CE=0!6.0V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage VIN=6.0V, IOUT=30mA, tr=5.0usec VEN/CE=0!6.0V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage VIN=6.0V, IOUT=100mA, tr=5.0usec VEN/CE=0!6.0V, CL=1.0uF (ceramic) Output Voltage EN/CE Input Voltage Semiconductor Ltd. Data Sheet 54

Product Information

XC6405DE84MR specifications and overview.

Summary

High Current, High Speed LDO Regulators, Voltage Detector Function

Description

High Current, High Speed LDO Regulators, Voltage Detector Function

Source title XC6405DE84MR Datasheet(PDF) - Torex Semiconductor

Related Parts

More parts from the same family.

Browse manufacturer