XC2163C51KML

XC2163_001 TOREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

ICs for use with 3rd Overtone Crystal Oscillators ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç ç /INH "H" or OPEN "L"(Stand-by) Q0 Divider Output High Impedance PIN NUMBER PIN NAME FUNCTION 1 /I NH Stand-by Control*

2 XT Crystal Oscillator Connection

(Input)

3 V SS GND

4 Q0 Clock Output

5 V DD Power Supply

6 /XT Crystal Oscillator Connection (Output) ˙GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits. Output is selectable from any one of the following values for f0: f0/1, f0/2, f0/4, f0/8. With oscillation capacitors and a feedback resistors built-in, it is possible to configure a stable 3rd overtone oscillator usi ng only an external crystal oscillator. Also available is an external oscillation capacitor/external oscillation feedback resistor type, which makes oscillation frequency control possible. ç ˙APPLICATIONS ˔Crystal Oscillation Modules ˔Computer, DSP Clocks ˔Communication Equipment ˔Various System Clocks ˙PIN CONFIGURATION ˙PIN ASSIGNMENT * Stand-by control pin has a pull-up resistor built-in. ˙/INH, Q0 PIN FUNCTION "H" = High Level "L" = Low Level ˙FEATURES Oscillation Frequency : 40MHz ~ 125MHz (Rf, Cg, Cd internal; 5.0V) (3rd Overtone) : 57MHz ~ 125MHz (Rf, Cg, Cd internal; 3.3V) : 20MHz ~ 125MHz (Rf, Cg, Cd external) Divider Ratio : Selectable fr om f0/1, f0/2, f0/4, f0/8. Output : 3-State Operating Voltage Range : 3.3V ʶ10%, 5.0V ʶ10% Low Current Consumption : Stand-by function included * CMOS Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Ultra Small Package : SOT-26 * Oscillation continues in stand-by mode ETR1403_001

DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION C : f0/1 ç D : f0/2 ç E : f0/4 ᶃ Divider Ratio F : f0/8 ᶄ Output Capacity 5 : 10TTL ᶅ Duty Level 1 : CMOS (V DD/2)ç *TTL : 20MHz to 37MHz Z : External type (refer to table 1) ᶆ Frequency Range & Rf, Cg, Cd Values AʙL : Built-in type (refer to table 2) ᶇ Package M : SOT-26 R : Embossed tape, standard feed ᶈ Device Orientation L : Embossed tape, reverse feed 5.0V TYPE 3.3V TYPE SYMBOL FREQUENCY RANGE Rf Cg/Cd FREQUENCY RANGE Rf Cg/Cd 108MHzʙ125MHz 1.6k Њ 10pF 108MHzʙ125MHz 3.9k Њ 4pF 93MHzʙ110MHz 2.4k Њ 10pF 95MHzʙ110MHz 2.4k Њ 7pF 80MHzʙ95MHz 2.4k Њ 12pF 80MHzʙ97MHz 2.7k Њ 8pF 68MHzʙ83MHz 2.4k Њ 15pF 68MHzʙ83MHz 2.7k Њ 10pF 55MHzʙ70MHz 3.3k Њ 15pF 58MHzʙ70MHz 3.9k Њ 10pF 45MHzʙ57MHz 3.3k Њ 20pF 50MHzʙ60MHz 3.9k Њ 12pF 35MHzʙ47MHz 3.6k Њ 24pF 40MHzʙ52MHz 2.4k Њ 20pF 28MHzʙ37MHz 4.7k Њ 27pF 33MHzʙ42MHz 3.6k Њ 20pF 24MHzʙ30MHz 5.6k Њ 30pF 28MHzʙ35MHz 3.6k Њ 24pF 20MHzʙ26MHz 6.8k Њ 33pF 24MHzʙ30MHz 3.9k Њ 27pF Z - - - 20MHzʙ26MHz 3.9k Њ 33pF 5.0V TYPE 3.3V TYPE SYMBOL FREQUENCY RANGE Rf Cg/Cd FREQUENCY RANGE Rf Cg/Cd A - - - 108MHzʙ125MHz 1.5k Њ 5.5pF B - - - 93MHzʙ110MHz 1.7k Њ 6.5pF C 108MHzʙ125MHz 2.2k Њ 5.5pF 80MHzʙ95MHz 2.2k Њ 5.5pF D 95MHzʙ110MHz 2.4k Њ 6.5pF 72MHzʙ83MHz 2.4k Њ 6.5pF E 80MHzʙ97MHz 3.2k Њ 6.5pF 65MHzʙ75MHz 3.2k Њ 6.5pF F 68MHzʙ83MHz 3.7k Њ 6.5pF 57MHzʙ67MHz 3.7k Њ 6.5pF H 55MHzʙ70MHz 4.9k Њ 7.6pF - - - K 45MHzʙ57MHz 5.5k Њ 11.0pF - - - L 40MHzʙ48MHz 6.5k Њ 11.0pF - - - ˙PRODUCT CLASSIFICATION ˔Ordering Information XC2163 ᶃᶄᶅᶆᶇᶈ Note: We recommend that a damping resistor Rd be added between the /XT pin & the crystal oscillator pin in order to safeguard the crystal oscillator and improve oscillation stability. Table 1: Frequency for External Type Table 2: Frequency for Built-In Type

PARAMETER SYMBOL CONDITIONS UNITS Supply Voltage V DD VSS-0.3ʙVSS+7.0 V Input Voltage V IN VSS-0.3ʙVDD+0.3 V Power Dissipation Pd 250 * mW Operating Temperature Range Topr -30ʙ+80 ˆ Storage Temperature Range Tstg -55ʙ+125 ˆ ˙BLOCK DIAGRAMS ˙ABSOLUTE MAXIMUM RATINGS * When implemented on a glass epoxy PCB.

PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 2.97 - 3.63 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD =2.97V, IOH = 8mA 2.2 2.4 - V 'L' Level Output Voltage V OL Qo pin, V DD = 2.97V, IOL = 8mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 125MHz - 18 - mA Supply Current 2 I DD2 /I NH = 'L', f = 125MHz - 5 - mA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 1.0 2.0 4.0 MЊ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 35 70 140 kЊ Cg R&D Value - 5.5 - pF Internal Oscillation Capacity Cd R&D Value - 5.5 - pF Internal Oscillation Feedback Resistance Rf - 1.5 - kЊ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 ЖA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 2.97 - 3.63 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD = 2.97V, IOH = 8mA 2.2 2.4 - V 'L' Level Output Voltage V OL Qo pin, V DD = 2.97V, IOL = 8mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 110MHz - 15 - mA Supply Current 2 I DD2 /I NH = 'L', f = 110MHz - 5 - mA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 1.0 2.0 4.0 MЊ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 35 70 140 kЊ Cg R&D Value - 6.5 - pF Internal Oscillation Capacity Cd R&D Value - 6.5 - pF Internal Oscillation Feedback Resistance Rf - 1.7 - kЊ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 ЖA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Output Rise Time tr CL=15pF, 0.1VDDˠ0.9VDD - 1.5 - ns Output Fall Time tf CL=15pF, 0.9VDDˠ0.1VDD - 1.5 - ns C51A 0.5V DD, CL=15pF, f=125MHz Output Duty Cycle DUTY C51B 0.5V DD, CL=15pF, f=110MHz 45 - 55 % Output Disable Delay Time tplz C L=15pF - - 100 ns ˙ELECTRICAL CHARACTERISTICS XC2163C51AMR FOSC=108MHz~125MHz ˙SWITCHING CHARACTERISTICS XC2163C51BMR FOSC=93MHz~110MHz XC2163C51AMR/XC2163C51BMR Note) R&G value (Unless otherwise stated, VDD=3.3V, Ta=25ˆ) (Unless otherwise stated, VDD=3.3V, No load, Ta=25ˆ) CMOS DUTY:VDD=3.3V, Ta=25ˆ

PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 4.5 - 5.5 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD = 4.5V, IOH = -16mA 3.9 4.2 - V 'L' Level Output Voltage V OL Qo pin, V DD = 4.5V, IOL = 16mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 120MHz - 31 - mA Supply Current 2 I DD2 /I NH = 'L', f = 120MHz - 14 - mA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 0.5 1.0 2.0 MЊ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 25 50 100 kЊ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 ЖA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Output Rise Time tr CL=15pF, 0.1VDDˠ0.9VDD - 1.5 - ns Output Fall Time tf CL=15pF, 0.9VDDˠ0.1VDD - 1.5 - ns Output Duty Cycle DUTY 0.5V DD, CL=15pF, f=120MHz 45 - 55 % Output Disable Delay Time tplz C L=15pF - - 100 ns Output Enable Delay Time tpzl C L=15pF - - 100 ns ˙SWITCHING CHARACTERISTICS ˙ELECTRICAL CHARACTERISTICS (Continued) XC2163C51ZMR FOSC = 108MHz to 125MHz; Rf = 1.6kЊ, Cg = Cd = 10pF external CMOS DUTY : VDD=5.0V, Ta=25ˆ The contents can be changed without advance notice. (Unless otherwise stated, VDD=5.0V, Ta=25ˆ) XC2163C51ZMR

PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 2.97 - 3.63 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD = 2.97V, IOH = -8mA 2.2 2.4 - V 'L' Level Output Voltage V OL Qo pin, V DD = 2.97V, IOL = 8mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 120MHz - 15 - mA Supply Current 2 I DD2 /I NH = 'L', f = 100MHz - 4 - mA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 2.0 4.0 6.0 MЊ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 70 140 250 kЊ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 ЖA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Output Rise Time tr C L=15pF, 0.1VDD ~ 0.9VDD - 1.5 - ns Output Fall Time tf C L=15pF, 0.9VDD ~ 0.1VDD - 1.5 - ns Output Duty Cycle DUTY 0.5V DD, CL=15pF, f=120MHz 45 - 55 % Output Disable Delay Time tplz C L=15pF - - 100 ns Output Enable Delay Time tpzl C L=15pF - - 100 ns ˙SWITCHING CHARACTERISTICS ˙ELECTRICAL CHARACTERISTICS (Continued) XC2163C51ZMR FOSC= 108MHz to 125MHz : Rf = 3.9kЊ, Cg = Cd = 4pF external CMOS DUTY : VDD=3.3V, Ta=25ˆ The contents can be changed without advance notice. (Unless otherwise stated, VDD=3.3V, Ta=25ˆ) XC2163C51ZMR

˙SWITCHING CHARACTERISTICS MEASUREMENT WAVEFORMS (1) Switching Time (2) Output Waveform Symmetry (3) Output Disable Delay Time, Output Enable Delay Time *) /INH Pin Input Waveform tr = tf = less than 10ns

Frequency (MHz) MARK 5.0V 3.3V A - 108~125 B - 93~110 C 108~125 80~95 D 95~110 72~83 E 80~97 65~75 F 68~83 57~67 H 55~70 - K 45~57 - L 40~48 - Z External ˙PACKAGING INFORMATION ˔SOT-26 ˙MARKING RULE ᶃRepresents product series ᶄRepresents divider ratio ᶅRepresents frequency & Rf, Cg & Cd values ᶆRepresents assembly lot number (Based on internal standards) SOT-26 (TOP VIEW)

1. The products and product specifications cont ained herein are subject to change without notice to improve performance characteristic s. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infri ngement of patents, pat ent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction ca n be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transpor t; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this ca talog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd.