XC2163

XC2163_1 TOREX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

1675 XC2163 ETR1403_001.doc /INH "H" or OPEN "L"(Stand-by) Q0 Divider Output High Impedance PIN NUMBER PIN NAME FUNCTION 1 /I NH Stand-by Control*

2 XT Crystal Oscillator Connection

(Input)

3 V SS GND

4 Q0 Clock Output

5 V DD Power Supply

6 /XT Crystal Oscillator Connection (Output) ■GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits. Output is selectable from any one of the following values for f0: With oscillation capacitors and a feedback resistors built-in, i t is possible to configure a stabl e 3rd overtone oscillator using only an external crystal oscillator. Also available is an external oscillation capacitor/external oscillation feedback resistor type, which makes oscillation frequency control possible. ◆CMOS ◆Oscillation Frequency : 125MHz (MAX.) ◆3-State Output ◆Built-in Oscillation Capacitor ◆Built-in Oscillation Feedback Resistor ◆Mini Mold SOT-26 Package ■APPLICATIONS

• Crystal Oscillation Modules
• Computer, DSP Clocks
• Communication Equipment
• Various System Clocks ■PIN CONFIGURATION ■PIN ASSIGNMENT * Stand-by control pin has a pull-up resistor built-in. ■/INH, Q0 PIN FUNCTION "H" = High Level "L" = Low Level ■FEATURES Oscillation Frequency : 40MHz ~ 125MHz (Rf, Cg, Cd internal; 5.0V) (3rd Overtone) : 57MHz ~ 125MHz (Rf, Cg, Cd internal; 3.3V) : 20MHz ~ 125MHz (Rf, Cg, Cd external) Divider Ratio : Selectable from f0/1, f0/2, f0/4, f0/8. Output : 3-State Operating Voltage Range : 3.3V ±10%, 5.0V ±10% Low Current Consumption : Stand-by function included * Ultra Small Package : SOT-26 mini mold * Oscillation continues in stand-by mode

DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION C : f0/1 D : f0/2 E : f0/4 ① Divider Ratio F : f0/8 ② Output Capacity 5 : 10TTL ③ Duty Level 1 : CMOS (V DD/2) *TTL : 20MHz to 37MHz Z : External type (refer to table 1) ④ Frequency Range & Rf, Cg, Cd Values A～L : Built-in type (refer to table 2) ⑤ Package M : SOT-26 R : Embossed tape, standard feed ⑥ Device Orientation L : Embossed tape, reverse feed 5.0V TYPE 3.3V TYPE SYMBOL FREQUENCY RANGE Rf Cg/Cd FREQUENCY RANGE Rf Cg/Cd 108MHz～125MHz 1.6k Ω 10pF 108MHz～125MHz 3.9k Ω 4pF 93MHz～110MHz 2.4k Ω 10pF 95MHz～110MHz 2.4k Ω 7pF 80MHz～95MHz 2.4k Ω 12pF 80MHz～97MHz 2.7k Ω 8pF 68MHz～83MHz 2.4k Ω 15pF 68MHz～83MHz 2.7k Ω 10pF 55MHz～70MHz 3.3k Ω 15pF 58MHz～70MHz 3.9k Ω 10pF 45MHz～57MHz 3.3k Ω 20pF 50MHz～60MHz 3.9k Ω 12pF 35MHz～47MHz 3.6k Ω 24pF 40MHz～52MHz 2.4k Ω 20pF 28MHz～37MHz 4.7k Ω 27pF 33MHz～42MHz 3.6k Ω 20pF 24MHz～30MHz 5.6k Ω 30pF 28MHz～35MHz 3.6k Ω 24pF 20MHz～26MHz 6.8k Ω 33pF 24MHz～30MHz 3.9k Ω 27pF Z - - - 20MHz～26MHz 3.9k Ω 33pF 5.0V TYPE 3.3V TYPE SYMBOL FREQUENCY RANGE Rf Cg/Cd FREQUENCY RANGE Rf Cg/Cd A - - - 108MHz～125MHz 1.5k Ω 5.5pF B - - - 93MHz～110MHz 1.7k Ω 6.5pF C 108MHz～125MHz 2.2k Ω 5.5pF 80MHz～95MHz 2.2k Ω 5.5pF D 95MHz～110MHz 2.4k Ω 6.5pF 72MHz～83MHz 2.4k Ω 6.5pF E 80MHz～97MHz 3.2k Ω 6.5pF 65MHz～75MHz 3.2k Ω 6.5pF F 68MHz～83MHz 3.7k Ω 6.5pF 57MHz～67MHz 3.7k Ω 6.5pF H 55MHz～70MHz 4.9k Ω 7.6pF - - - K 45MHz～57MHz 5.5k Ω 11.0pF - - - L 40MHz～48MHz 6.5k Ω 11.0pF - - - ■PRODUCT CLASSIFICATION

• Ordering Information XC2163 ①②③④⑤⑥ Note: We recommend that a damping resistor Rd be added between the /XT pin & the crystal oscillator pin in order to safeguard the crystal oscillator and improve oscillation stability. Table 1: Frequency for External Type Table 2: Frequency for Built-In Type

Frequency (MHz) MARK 5.0V 3.3V A - 108~125 B - 93~110 C 108~125 80~95 D 95~110 72~83 E 80~97 65~75 F 68~83 57~67 H 55~70 - K 45~57 - L 40~48 - Z External PARAMETER SYMBOL CONDITIONS UNITS Supply Voltage V DD VSS-0.3～VSS+7.0 V Input Voltage V IN VSS-0.3～VDD+0.3 V Power Dissipation Pd 250 * mW Operating Temperature Range Topr -30～+80 ℃ Storage Temperature Range Tstg -55～+125 ℃ ■PACKAGING INFORMATION

• SOT-26 ■MARKING RULE ①Represents product series ②Represents divider ratio ③Represents frequency & Rf, Cg & Cd values ④Represents assembly lot number (Based on internal standards) ■BLOCK DIAGRAMS ■ABSOLUTE MAXIMUM RATINGS * When implemented on a glass epoxy PCB. SOT-26 (TOP VIEW)

PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 2.97 - 3.63 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD =2.97V, IOH = 8mA 2.2 2.4 - V 'L' Level Output Voltage V OL Qo pin, V DD = 2.97V, IOL = 8mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 125MHz - 18 - mA Supply Current 2 I DD2 /I NH = 'L', f = 125MHz - 5 - μA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 1.0 2.0 4.0 MΩ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 35 70 140 kΩ Cg R&D Value - 5.5 - pF Internal Oscillation Capacity Cd R&D Value - 5.5 - pF Internal Oscillation Feedback Resistance Rf - 1.5 - kΩ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 μA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 2.97 - 3.63 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD = 2.97V, IOH = 8mA 2.2 2.4 - V 'L' Level Output Voltage V OL Qo pin, V DD = 2.97V, IOL = 8mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 110MHz - 15 - mA Supply Current 2 I DD2 /I NH = 'L', f = 110MHz - 5 - μA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 1.0 2.0 4.0 MΩ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 35 70 140 kΩ Cg R&D Value - 6.5 - pF Internal Oscillation Capacity Cd R&D Value - 6.5 - pF Internal Oscillation Feedback Resistance Rf - 1.7 - kΩ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 μA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Output Rise Time tr CL=15pF, 0.1VDD→0.9VDD - 1.5 - ns Output Fall Time tf CL=15pF, 0.9VDD→0.1VDD - 1.5 - ns C51A 0.5V DD, CL=15pF, f=125MHz Output Duty Cycle DUTY C51B 0.5V DD, CL=15pF, f=110MHz 45 - 55 % Output Disable Delay Time tplz C L=15pF - - 100 ns ■ELECTRICAL CHARACTERISTICS XC2163C51AMR FOSC=108MHz~125MHz ■SWITCHING CHARACTERISTICS XC2163C51BMR FOSC=93MHz~110MHz XC2163C51AMR/XC2163C51BMR Note) R&G value (Unless otherwise stated, VDD=3.3V, Ta=25℃) (Unless otherwise stated, VDD=3.3V, No load, Ta=25℃) CMOS DUTY:VDD=3.3V, Ta=25℃

PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 4.5 - 5.5 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD = 4.5V, IOH = -16mA 3.9 4.2 - V 'L' Level Output Voltage V OL Qo pin, V DD = 4.5V, IOL = 16mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 120MHz - 31 - mA Supply Current 2 I DD2 /I NH = 'L', f = 120MHz - 14 - mA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 0.5 1.0 2.0 MΩ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 25 50 100 kΩ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 μA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Output Rise Time tr CL=15pF, 0.1VDD→0.9VDD - 1.5 - ns Output Fall Time tf CL=15pF, 0.9VDD→0.1VDD - 1.5 - ns Output Duty Cycle DUTY 0.5V DD, CL=15pF, f=120MHz 45 - 55 % Output Disable Delay Time tplz C L=15pF - - 100 ns Output Enable Delay Time tpzl C L=15pF - - 100 ns ■SWITCHING CHARACTERISTICS ■ELECTRICAL CHARACTERISTICS (Continued) XC2163C51ZMR FOSC = 108MHz to 125MHz; Rf = 1.6kΩ, Cg = Cd = 10pF external CMOS DUTY : VDD=5.0V, Ta=25℃ The contents can be changed without advance notice. (Unless otherwise stated, VDD=5.0V, Ta=25℃) XC2163C51ZMR

PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Operating Voltage V DD 2.97 - 3.63 V 'H' Level Input Voltage V IH /I NH pin 2.4 - - V 'L' Level Input Voltage V IL /I NH pin - - 0.4 V 'H' Level Output Voltage V OH Qo pin, V DD = 2.97V, IOH = -8mA 2.2 2.4 - V 'L' Level Output Voltage V OL Qo pin, V DD = 2.97V, IOL = 8mA - 0.3 0.4 V Supply Current 1 I DD1 /I NH = OPEN, CL = 15pF, f = 120MHz - 15 - mA Supply Current 2 I DD2 /I NH = 'L', f = 100MHz - 4 - mA Input Pull-Up Resistance 1 Rup1 /I NH = 'L' 2.0 4.0 6.0 MΩ Input Pull-Up Resistance 2 Rup2 /I NH = 0.7VDD 70 140 250 kΩ Output Off Leak Current I OZ Qo pin, /I NH = 'L' - - 10 μA STANDARD VALUE PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Output Rise Time tr C L=15pF, 0.1VDD ~ 0.9VDD - 1.5 - ns Output Fall Time tf C L=15pF, 0.9VDD ~ 0.1VDD - 1.5 - ns Output Duty Cycle DUTY 0.5V DD, CL=15pF, f=120MHz 45 - 55 % Output Disable Delay Time tplz C L=15pF - - 100 ns Output Enable Delay Time tpzl C L=15pF - - 100 ns ■SWITCHING CHARACTERISTICS ■ELECTRICAL CHARACTERISTICS (Continued) XC2163C51ZMR FOSC= 108MHz to 125MHz : Rf = 3.9kΩ, Cg = Cd = 4pF external CMOS DUTY : VDD=3.3V, Ta=25℃ The contents can be changed without advance notice. (Unless otherwise stated, VDD=3.3V, Ta=25℃) XC2163C51ZMR

■SWITCHING CHARACTERISTICS MEASUREMENT WAVEFORMS (1) Switching Time (2) Output Waveform Symmetry (3) Output Disable Delay Time, Output Enable Delay Time *) /INH Pin Input Waveform tr = tf = less than 10ns